buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 22673 matches
Sort by:
Items Per Page:  20  |  50 |  100
USED TECHNICA MODEL ZSM-150 CENTER HOLE GRINDER, 2” X 43”
SPECIFICATIONS CONE ANGLE TO GROUND CENTER HOLES: 60° MAXIMUM DIAMETER OF GROUND CENTER HOLES: 2” MAXIMUM DIAMETER OF WORKPIECE: 5” MAXIMUM WORKPIECE LENGTH: 43” HEADSTOCK AXIS TO COLUMN FACE: 6” GRINDIN
  • Grinding wheel diameter: 2"
  • Maximum length: 43"
    Doosan DNM 6700 Vertical Machining Center 2017
    Doosan DNM 6700 Vertical Machining Center 2017 TRAVELS X Axis Travel 51.2" Y Axis Travel 26.4" Z Axis Travel 24.6" FEED RATES X Axis Rapid Traverse 1,417 ipm Y Axis Rapid Trave
    HAAS  Vertical Machining Center VF-3SS-YT 2017
    HAAS Vertical Machining Center VF-3SS-YT 2017 40 Taper Vertical Machining Centers Super Speed VMC; 40" x 26" x 25" (xyz), ( 1,016 x 660 x 635mm), 40-taper, 30-hp (22.4 kW) vector drive, 12,000
    OKUMA Intelligent Multitasking Model MULTUS B200II (W} with OSP-P300S CNC C
    OKUMA Intelligent Multitasking Model MULTUS B200II (W} with OSP-P300S CNC Controller (15 inch OSP suite) Including CE mark 2017 Standard Specification Main spindle motor PREX 11/7.5kW (20 min./cent) Main spindle sp
    Christeen | 1 HP | Dimensions 22" x 38" x 50" |
    Capacity 10,000 lbs Max. lift 55' Engine Cummins turbo Cylinders 4 Fuel Diesel Mast 3 Tires Pneumatics Year 2008 Weight 35,410 lbs Dimensions 252" x 101" x 100"
    MORI SEIKI SL-35B/750 CNC TURNING CENTER
    Make: Mori Seiki Model No.: SL-35B/750 Serial No.: 1286 Condition: Very Good All specifications are approximations, and are subject to verification. “This machine is in very Good running condition. It is equippe
    • Swing: 23.6"
    • Centers: 35.6"
      Daewoo Lynx 200LC CNC Turning Center
      Make: Daewoo Model No.: Lynx 200LC Serial # L2002184 Year: 2001 Condition: Excellent All specifications are approximations, and are subject to verification. “One Owner machine excellent running condition, only
      • Swing: 18.11"
      • Centers: 24.8"
        10 Cu Ft Sweco Vibratory Finisher, Model FM-10-7, 44-3/4" Round Bowl,
        10 CU FT SWECO VIBRATORY DEBURRING/FINISHING MILL Model FM-10-7, S/N 10FM-664-2, New 1964 Stock # K15658 EQUIPPED WITH: Separate Electrical Box, 44-3/4" Diameter by 14&q
        5000 lb Schenck H40BU Horziontal Balancing Machine
        5000 lb Schenck Model H40BU Horizontal Balancing Machine S/N: AH1041 New: 1987 EQUIPPED WITH: Balancing USA Easy Balance 2.2 Instrumentation with Graphic Display. Automatic Calibration Routine. Teach Mode and
        • Capacity: 5000Lb
        • Length: 112"
          Charmilles Robofil 290 wire EDM, 1998, 30,000 hours
          - Charmilles CNC Control - Graphics, Pendent - Isopulse "Brass" Generator - Advantage Chiller - Manuals - Transformer ** Machining Hours - 30,570 ( as of 6/21/19 ) **
          • X axis travel: 15.7"
          • Y axis travel: 9.8"
            AgieCharmilles CUT30P Wire EDM, 2011, 9,000 hours
            Charmilles CNC Control - Graphics, Pendent - Isopulse "Brass" Generator - Advantage Chiller - Manuals - Transformer ** Machining Hours - 30,570 ( as of 6/21/19 ) **
            • X axis travel: 23.6"
            • Y axis travel: 15.7"
              6" x 18"Bridgeport Harig,618 EZ-SURF,Profile Dress,Slot Grind,Cre
              Serial No. 409 EZ New - 2000 CATALOG SPECIFICATIONS: Table Working Surface - Maximum.......................................6" x 18 Longitudinal Travel - X-Axis..............................................20&q
              1999 Mazak Multiplex 430 Twin-Spindle CNC Turning Center
              Specifications: Control ...................................................................... Mazatrol 640T Max Swing ................................................................................ 22” Swing Over
              • Swing: 22"
              • Centers: 46.46"
                2012 Haas ST-20T Big Bore
                Specifications: Swing Over Apron ......................................................................... 31.8” Max Turning Length ......................................................................... 21” Max Tur
                • Swing: 31.8"
                • Centers: 24"
                  2014 Haas ST-30T CNC Turning Center
                  Specifications: Swing Over Apron ......................................................................... 31.5” Max Turning Diameter ...................................................................... 21” Max Turn
                  • Swing: 31.5"
                    MAKINO, A55E, MAKINO PRO3 CNTRL, FULL 4TH, NEW: 2002
                    SPECIFICATIONS: TRAVELS: --X: 22.05" --Y: 22.05" --Z: 23.6" -B AXIS INDEXING: FULL 4TH, BI-DIRECTIONAL RAPID TRAVERSE RATES (X, Y, Z): 3307 - 3700 IPM CUTTING FEED RATE: 0.04 - 320 IPM SPINDLE T
                    • X axis: 22.05"
                    • Y axis: 22.05"
                      5000 lb Schenck Model H40BU Horizontal Balancing Machine
                      S/N: AH1041 New: 1987 EQUIPPED WITH: Balancing USA Easy Balance 2.2 Instrumentation with Graphic Display. Automatic Calibration Routine. Teach Mode and Many Other Features. 5 HP Belt Driven Variable Speed Rotor D
                      • Capacity: 5000Lb
                        Scroll Saw 18" VS w/MblBs Dlta
                        Scroll Saw 18" Variable Speed w/Mobile Base Delta Model: 40-601 [Delta] S/N: 87G33019 1Ph 115Volt 18" Variable Speed w/Mobile Base
                        Boring Machine 13spdl BT Delta
                        Boring Machine 13 spindle Bench Top Delta Model: 32-325 [Delta] S/N: 05K114922 3/4Hp; 1Ph; 115Volt
                        Radial Arm 10" 11/5.5a Delta
                        Radial Arm 10" 11/5.5a Delta Model: 33-990 [Delta] S/N: 86J41563 11/5.5amp; 1ph; 115/230volt
                        Price:
                        •  to 
                        1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>