buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 101 - 200 of 20985 matches
Sort by:
Items Per Page:  20 |  50 |  100
Torit SDF-6 1600 CFM Dust Collector
$RFQ
Torit SDF-6 1600 CFM Dust Collector
CFM 1600 Power 208 volts No. of Cartridges 6
2008 - 143 Ton Amada HDS-1303NT CNC Press Brake
$RFQ
2008 - 143 Ton Amada HDS-1303NT CNC Press Brake
Capacity 143 US tons Max Bending Length 126.8" Distance between Housings 106.3" Max. Stroke Length 7.87" Ram Speed 472 IPM (approach & return) Bending Speed 47 IPM Open Height 19.7" (15.75&q
  • Tonnage: 143T
    2018 - 193 Ton x 14' Ermak Speed Bend CNC Press Brake
    $RFQ
    2018 - 193 Ton x 14' Ermak Speed Bend CNC Press Brake
    Capacity 193 Tons Overall Bending Length 168" Distance Between Housings 148.82 Y Rapid Speed 7.09" /sec Y Working Speed 0.49" /sec Y Return Speed 7.48" /sec X Axis Travel 31.5" X Axis Spee
    • Tonnage: 193T
      Mazak Smart 530C CNC Vert Machining Cntr, 51.18" x 21.65" tbl, CA
      $RFQ
      Mazak Smart 530C CNC Vert Machining Cntr, 51.18" x 21.65" tbl, CA
      MAZAK SMART 530C CNC VERTICAL MACHINING CENTER Model VCS 530C, S/N 233122, New 2012 Stock # Q12019 EQUIPPED WITH: Mazak Mazatrol Smart CNC Control, 4th-Axis Prewire with Drive, 51.18" x 21.65" Table, 1200
      • X axis: 41.34"
      • Y axis: 20.87"
        100 Ton x 10' Accurpress 710010 Hydraulic Press Brake, 2-Axis Back Gaug
        $RFQ
        100 Ton x 10' Accurpress 710010 Hydraulic Press Brake, 2-Axis Back Gaug
        100 TON x 10' ACCURPRESS 710010 HYDRAULIC PRESS BRAKE Model 710010, S/N 4206, New 1997 Stock # Q12103 EQUIPPED WITH: Accurpress CNC Gauge System Control with 2-Axis Backgauge, ETS Pendant, Foot Pedal, Light Cur
        • Tonnage: 100T
          60T Minster #6 Single Point OBI Flywheel Press, 24" x14.5" Ram, 3
          $RFQ
          60T Minster #6 Single Point OBI Flywheel Press, 24" x14.5" Ram, 3
          60 TON MINSTER SINGLE POINT OBI FLYWHEEL PRESS Model #6, S/N 101-6-22050, New 1975 Stock # Q12043 EQUIPPED WITH: Inch / Single / Continuous Modes, Dual Palm Buttons (T Stand), Air Clutch and Brake, Air Counterbalan
          • Tonnage: 60T
          • Stroke: 6"
            2019 TT Tech Grundowinch RW10 Winch/ Trlr Mount RTR#5053536-01
            $36,000
            2019 TT Tech Grundowinch RW10 Winch/ Trlr Mount RTR#5053536-01
            Unit located in Raleigh, NC. 2019 TT Technologies Grundowinch RW10 Constant Tension Variable Speed Winch, T/A Trailer Mounted, Hour Meter Reads: 865 (Unverified), S/N 2019W414 All equipment is sold “As Is, Where Is”.
            33.4" x 25.6" Behringer Automatic Horizontal Dual Column Bandsaw,
            $RFQ
            33.4" x 25.6" Behringer Automatic Horizontal Dual Column Bandsaw,
            33.4" x 25.6" BEHRINGER AUTOMATIC HORIZONTAL DUAL COLUMN BAND SAW Model HBP 650-850A, S/N 10004068, New 2012 Stock # Q12046 EQUIPPED WITH: Behringer BT-41 CNC Programmable Control, Large Diameter Twin Pil
            17" x40" Romi M17 Flat Bed CNC Lathe, Fanuc 21i-T, 10" Chuck
            $RFQ
            17" x40" Romi M17 Flat Bed CNC Lathe, Fanuc 21i-T, 10" Chuck
            17" x 40" ROMI M17 CNC FLAT BED LATHE Model M17, S/N 002-090664-403, New 2005 Stock # Q12047 EQUIPPED WITH: Fanuc 21i-T CNC Control with 10.4" Color LCD Monitor, Apron with 2 Electronic Hand Wheels f
            • Swing: 16.9"
            • Centers: 40"
              5' x 15" Nardini FRN 60 Radial Arm Drill, 1450 RPM, MT5, 24"
              $RFQ
              5' x 15" Nardini FRN 60 Radial Arm Drill, 1450 RPM, MT5, 24"
              5' x 15" NARDINI FRN 60 RADIAL ARM DRILL Model FRN 60-1250, New 1985 Stock # Q12025 EQUIPPED WITH: Power Arm Elevation, Power Clamping, Rapid Traverse on Head, Tapping/Threading Capabilities, Plain-Type Ba
              • Arm length: 5'
              • Column diameter: 15"
                Top Work Monoset Tool and Cutter Grinder w New .0001 3 Axis DRO & Tooli
                $11,500
                Top Work Monoset Tool and Cutter Grinder w New .0001 3 Axis DRO & Tooli
                Top Work Monoset Tool & Cutter with Tooling Shown and Brand New .0001 - 3 Axis Digital Readout ****Excellent Condition**** Very Tight Machine Grinder with Tooling. Comes equipped with DC Spinning Motor with RPM
                TRANSOR COOLANT FILTER 12290-1000 ADCO-BISK COOLANT FILTER (for Rollomatic Grinders)
                $RFQ
                TRANSOR COOLANT FILTER 12290-1000 ADCO-BISK COOLANT FILTER (for Rollomatic Grinders)
                DESCRIPTION             THIS TRANSOR FILTER WAS ORIGINALLY SUPPLIED WITH (2) ROLLOMATIC CNC GRINDERS.  SPECIFICA
                Rush Machinery FC-350W Wheel Truing & Dressing Machine, New 2016
                $RFQ
                Rush Machinery FC-350W Wheel Truing & Dressing Machine, New 2016
                CNC Control yes Type of CNC Control Indu
                Trumpf TruMark Station 5000 Laser Engraving Machine, Trumpf 3000 Laser Head, 4" Rotar
                $RFQ
                Trumpf TruMark Station 5000 Laser Engraving Machine, Trumpf 3000 Laser Head, 4" Rotar
                CNC Control yes Type of CNC Control PC C
                2022 Doucet 24" Return Conveyor Belt RTR#50410002-05
                $11,000
                2022 Doucet 24" Return Conveyor Belt RTR#50410002-05
                Equipment located in Phoenix, AZ. 2022 Doucet 24" Return Conveyor Belt, Model: FB-24-5-15-G, 112"L x 26"W x 35"H, 230v, 60Hz, 3PH, S/N: 2022-10-034 All equipment is sold “As Is, Where Is”. Reasonab
                Ironwood Cut18L Saw & Tigerstop TS12 Pusher RTR#5041002-04
                $10,500
                Ironwood Cut18L Saw & Tigerstop TS12 Pusher RTR#5041002-04
                Equipment located in Phoenix, AZ. 2022 Ironwood Cut18L Cut-Off Saw, 10 Hp, 3PH/60Hz/230/460v, S/N: 110871, w/ (1) Est. 2022 TigerStop TS12 12' Automated Pusher & Stop, 12' Working Length, 180lb Capacity, 110
                2019 EPIC C120T Trailer Mounted Hydroseeder RTR#5044705-01
                $59,000
                2019 EPIC C120T Trailer Mounted Hydroseeder RTR#5044705-01
                Unit located in Thomaston, GA. 2019 EPIC/Erosion Control Products C120T Trailer Mounted Hydroseeder, 1,180 Gallon Tank, Hour Meter Reads: 1,718.2 (Unverified) VIN: 1E9BF2421KG646026 All equipment is sold “As Is, Where
                Jointer 6" Delta w/MblBs
                $899
                Jointer 6" Delta w/MblBs
                Jointer 6" Delta w/MblBs Model # 37-866X [Delta] S/N: 018134W5052 3 Knives; Mobile Base 13Amp, 1Ph, 120Volt
                Planer 13" 2-Spd B/T DeWalt
                $599
                Planer 13" 2-Spd B/T DeWalt
                Planer 13" 2-Spd B/T DeWalt Model: DW735 [Dewalt] S/N: 200423CT43941 13" Bench Top Planer; 3 Knife; 2-Speed Feed; Mobile Stand 15Amp; 1Ph; 120Volt
                Drill Press Rdl Arm 1/3hp Rkn
                $449
                Drill Press Rdl Arm 1/3hp Rkn
                Drill Press Rdl Arm 1/3hp Rkn Model: 30-250 [Rikon] S/N: 0431Q0064 Radial Arm Drill Press; 10" - 32"; 5-Speed 1/3Hp; 1Ph; 120Volt
                Router Tbl/Cbnt/Fence/Router
                $699
                Router Tbl/Cbnt/Fence/Router
                Router Tbl/Cbnt/Fence/Router Model: 1611 Router [Bosch]; Table/Cabinet [Bench Dog]; CL12 Fence [Jointech] S/N: 8440057 Router Table w/Table; Cabinet; Fence; Router 14Amp; 1Ph; 115Volt
                Dust Collector 1.5hp -Shop Fox
                $399
                Dust Collector 1.5hp -Shop Fox
                Dust Collector 1.5hp -Shop Fox Model: W1685 [Shop Fox] S/N: 14430 30 Micron 1.5Hp; 1Ph; 120Volt
                • Motor: 1.5HP
                  2004 MAZAK MODEL QUICK TURN NEXUS 200MY CNC LATHE, MAZATROL 640T CONT.
                  $RFQ
                  2004 MAZAK MODEL QUICK TURN NEXUS 200MY CNC LATHE, MAZATROL 640T CONT.
                  SPECIFICATIONS: MAX. SWING: 20.67” MAX. TURNING DIA.: 11.81” MAX MACHINING LENGTH: 21.1” TURRET STATIONS: 12 LIVE TOOLING: C-AXIS, Y-AXIS CHUCK SIZE: 8” SPINDLE BORE: 2.44” SPINDLE NOS
                  • Swing: 20.67"
                  • Centers: 0"
                    2011 - 110 Ton Amada RGM2-1003 CNC Press Brake
                    $RFQ
                    2011 - 110 Ton Amada RGM2-1003 CNC Press Brake
                    Capacity 110 Tons Table Length 118" Max. Bending Length 122" Distance Between housings 100.4" Throat 15.75" Stroke 3.94" Open Height 14.57" Dimensions (approx) 141" x 63" x
                    • Tonnage: 110T
                      2010 - 143 Ton Amada HDS-1303NT Hydraulic Press Brake
                      $RFQ
                      2010 - 143 Ton Amada HDS-1303NT Hydraulic Press Brake
                      ID 7547666 Manufacturer Amada Model HDS-1303NT Year 2010 Condition Used Location Massechusetts Price $89,500.00 Category Press Brakes Subcategories Hydraulic - CNC Stock Number 13074 Serial Number Capacity
                      • Tonnage: 143T
                        1999 - 110 Ton Amada RG-100 CNC Press Brake
                        $RFQ
                        1999 - 110 Ton Amada RG-100 CNC Press Brake
                        Capacity 110 Tons Overall Bending Length 118.2" Distance Between housings 100" Stroke 3.9" Open Height 14.57" Throat 15.75" Main Motor 10 HP Dimensions (approx) 12 x 6 x 8'H Weight (a
                        • Tonnage: 110T
                          1995 - 88 Ton Amada RG-80 CNC Press Brake
                          $RFQ
                          1995 - 88 Ton Amada RG-80 CNC Press Brake
                          Capacity 88 Tons Overall Bending Length 98" Distance Between End Frames 86" Length of Stroke 3.9 Open Height 14.57" Shut Height 10.67" Throat Depth 15.7" Overall Dimensions 140"x60&qu
                          • Tonnage: 88T
                            1995 - 88 Ton Amada RG-80 CNC Press Brake
                            $RFQ
                            1995 - 88 Ton Amada RG-80 CNC Press Brake
                            Capacity 88 Tons Overall Bending Length 98" Distance Between End Frames 86" Length of Stroke 3.9 Open Height 14.57" Shut Height 10.67" Throat Depth 15.7" Overall Dimensions 140"x60&qu
                            • Tonnage: 88T
                              1996 - 88 Ton Amada RG-80 CNC Press Brake
                              $RFQ
                              1996 - 88 Ton Amada RG-80 CNC Press Brake
                              Capacity 88 Tons Overall Bending Length 98" Distance Between End Frames 86" Length of Stroke 3.9 Open Height 14.57" Shut Height 10.67" Throat Depth 15.7" Overall Dimensions 140"x60&qu
                              • Tonnage: 88T
                                1994 -88Ton Amada RG-80 CNC Press Brake
                                $RFQ
                                1994 -88Ton Amada RG-80 CNC Press Brake
                                Capacity 88 Tons Overall Bending Length 98" Distance Between End Frames 86" Length of Stroke 3.9 Open Height 14.57" Shut Height 10.67" Throat Depth 15.7" Overall Dimensions 140"x60&qu
                                • Tonnage: 88T
                                  1988 - 110 Ton Amada RG-100 CNC Press Brake
                                  $RFQ
                                  1988 - 110 Ton Amada RG-100 CNC Press Brake
                                  Capacity 110 Tons Overall Bending Length 118.2" Distance Between housings 100" Stroke 3.9" Open Height 14.57" Throat 15.75" Main Motor 10 HP Dimensions (approx) 12 x 6 x 8'H Weight (a
                                  • Tonnage: 110T
                                    2013 Haas VF-2SS CNC Vertical Machining Center
                                    $RFQ
                                    2013 Haas VF-2SS CNC Vertical Machining Center
                                    Table Size 36"x18" X-Axis 30" Y-Axis 16" Z-Axis 20" Max. Table Load 1,500 lbs Rapid Traverse Rate 1000 IPM Spindle Speeds 0 - 12,000 RPM Spindle Taper 40 Taper Spindle Motor 20 HP Tool C
                                    • X axis: 30"
                                    • Y axis: 16"
                                      HITACHI SEIKI VT-500 SUPERTILT 5-AXIS VMC
                                      $7,950
                                      HITACHI SEIKI VT-500 SUPERTILT 5-AXIS VMC
                                      SEICO 16M, 12,000 RPM, 20 ATC, 20 HP, (NEEDS NEW SPINDLE MOTOR)
                                      • X axis: 20"
                                      • Y axis: 16"
                                        ANCA FAST GRIND CNC TOOL & CUTTER GRINDER
                                        $69,500
                                        ANCA FAST GRIND CNC TOOL & CUTTER GRINDER
                                        5-AXIS, 8' GRINDING WHEEL, 10 HP, INCLUDER MIST BUSTER, (NEED PAREMETERS REINSTALLED)
                                        Dake Johnson V-40 Vertical Bandsaw
                                        $RFQ
                                        Dake Johnson V-40 Vertical Bandsaw
                                        Dake Johnson V-40 Vertical Bandsaw Year of Mfg: 1994 Throat Depth: 41" Max Work Height Capacity: 12-1/2" Worktable Dimensions (Overall) W x L: 26-3/8" x 26-3/8" Worktable Tilt (L/R): 10
                                        • Throat capacity: 41"
                                        • Height capacity: 12.5"
                                          Clausing 15 Drill Press
                                          $RFQ
                                          Clausing 15 Drill Press
                                          Clausing 15 Drill Press Overall size of table: 25” x 45” Table working surface: 20” x 40” Distance, face of column to centerline of spindle: 7-1/2" Drilling capacity: Cast iron: 5/8” Mild steel: 1/
                                          • # Spindles: #1
                                          • X axis travel: 4.75"
                                            MAG Fadal VMC-6030HT, 62.5" x 30" Tbl, 60"X, 30"Y, 30&q
                                            $RFQ
                                            MAG Fadal VMC-6030HT, 62.5" x 30" Tbl, 60"X, 30"Y, 30&q
                                            Year Built - 2008 SPECIFICATIONS: Table: - Size............62.5" x 30" - Capacity............4,120 Lbs. - T-Slots............5 x 0.709" x 3.75" Floor to Table Surface............36" Spin
                                            Fadal VMC-4020HT, 48" x 20" Tbl, 40"X, 20"Y, 20"Z,
                                            $RFQ
                                            Fadal VMC-4020HT, 48" x 20" Tbl, 40"X, 20"Y, 20"Z,
                                            Year Built - 2004 SPECIFICATIONS: Table: - Size............48" x 20" - Load Capacity - Maximum............3,966 Lbs. - T-Slots............5 x 0.70" x 3.75" - Floor to Table Surface............
                                            Doosan Puma 240MS, 21.7" Sw, 8"X, 22.8"Z, 22.8"B, Sub S
                                            $RFQ
                                            Doosan Puma 240MS, 21.7" Sw, 8"X, 22.8"Z, 22.8"B, Sub S
                                            Year Built - 2009 SPECIFICATIONS: Turning Diameter - Maximum............11.4" Machining Length - Maximum............19.7" Swing Over Bed - Maximum............21.7" Distance Between Spindles.........
                                            2022 Sany SY60C Excavator w/ Bucket RTR#5053982-01
                                            $33,000
                                            2022 Sany SY60C Excavator w/ Bucket RTR#5053982-01
                                            Equipment located in Katy, TX. 2022 Sany SY60C Excavator w/ Bucket, Yanmar 4TNV98C Diesel Engine, Hyd Transmission, Enclosed Cab, Blade, A/C, Heater, AM/FM Radio, Hour Meter Reads: 872 (Unverified), S/N: SY006MCBD0138J0
                                            2022 Kentwood Gang Rip Saw, Model: R340SF RTR#5041002-06
                                            $45,000
                                            2022 Kentwood Gang Rip Saw, Model: R340SF RTR#5041002-06
                                            Equipment located in Phoenix, AZ. 2022 Kentwood Gang Rip Saw, Model: R340SF, 460v, 60Hz, 70A, 3PH, S/N: 34014 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by appoi
                                            2022 Unique Machines Door Clamp Table Model 285 RTR#5041002-03
                                            $3,000
                                            2022 Unique Machines Door Clamp Table Model 285 RTR#5041002-03
                                            Equipment located in Phoenix, AZ. 2022 Unique Machines Hydraulic Door Clamp Table, Model 285, 3" Stroke Clamp Cylinders, S/N: 1006230285 All equipment is sold “As Is, Where Is”. Reasonable offers will be consider
                                            2022 Unique Machines Cope Machine Model 265 RTR#5041002-02
                                            $6,000
                                            2022 Unique Machines Cope Machine Model 265 RTR#5041002-02
                                            Equipment located in Phoenix, AZ. 2022 Unique Machines Cope Cutting Machine, Model 265, 35"W x 25"L x 3'2"H, 220V, 30A, 3PH Motor, S/N: 0211220265HI All equipment is sold “As Is, Where Is”. Reasonab
                                            2022 Unique Machines Shape & Sand Door Machine RTR#5041002-01
                                            $55,000
                                            2022 Unique Machines Shape & Sand Door Machine RTR#5041002-01
                                            Equipment located in Phoenix, AZ. 2022 Unique Machines Shape & Sand Door Machine, Model 422, 48"W x 24"L x 36"H, 10HP, 220V, 30A, 3PH Motor, S/N: 0132220422 All equipment is sold “As Is, Where Is”.
                                            MIYANO ANC-45S CNC 5-Axis CNC Turning Center
                                            $RFQ
                                            MIYANO ANC-45S CNC 5-Axis CNC Turning Center
                                            MIYANO ANC-45S CNC 5-Axis CNC Turning Center Age 1992 Max. Swing ..................................... 23.62 Max. Work Length .......................... 15 MAIN SPINDLE: Bar Capacity ..........................
                                            2011 Sodick AD25L Sinker EDM
                                            $RFQ
                                            2011 Sodick AD25L Sinker EDM
                                            2011 Sodick AD25L Sinker EDM SPECIFICATIONS: TABLE SIZE-W 11.81" TABLE SIZE-L 17.72" X 11.81" Y 7.87" Z 5.91" The highly compact AD25L provides improved machining accuracy and spe
                                            2001 Cat AP-650B Crawler Mounted Asphalt Paver RTR#4121057-02
                                            $12,000
                                            2001 Cat AP-650B Crawler Mounted Asphalt Paver RTR#4121057-02
                                            Equipment located in Billings, MT. 2001 Cat AP-650B Crawler Mounted Asphalt Paver, 3054TA Cat Diesel Engine, Hyd Transmission, 112 HP, Hour Meter Reads: 3,919 (Unverified), S/N: CATAP650H9DN00458 All equipment is sold
                                            2000 Cat AP-1000B Wheel Mounted Asphalt Paver RTR#4121057-01
                                            $10,000
                                            2000 Cat AP-1000B Wheel Mounted Asphalt Paver RTR#4121057-01
                                            Equipment located in Billings, MT. 2000 Cat AP-1000B Wheel Mounted Asphalt Paver, 3116TA Cat Diesel Engine, Hyd 4-Speed Transmission, 158 Hp, Hour Meter Reads: 4,701 (Unverified), S/N: 7HN00237 All equipment is sold “A
                                            Grieve 36" x 32"H x 36" powered exhaust, 350F model 333
                                            $RFQ
                                            Grieve 36" x 32"H x 36" powered exhaust, 350F model 333
                                            Grieve model 333 cabinet oven with double door opening, stainless steel interior, heavy duty leg stand, 36"W x 32"H x 36"L work area, 350F, 230V single phase (35A), Watlow #96 solid state temperature contr
                                            • Chamber width: 36"
                                            • Chamber length: 36"
                                              2022 All-Fill AFI 525B Piston Filler RTR#5043120-01
                                              $9,000
                                              2022 All-Fill AFI 525B Piston Filler RTR#5043120-01
                                              Equipment located in Raleigh, NC. 2022 All-Fill AFI 525B Piston Filler, 80 PSI, with Additional Related Accessories, S/N: 525121 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be
                                              2022 Takeuchi TL12R Compact Track Loader RTR#5043742-01
                                              $50,000
                                              2022 Takeuchi TL12R Compact Track Loader RTR#5043742-01
                                              Equipment located in Raleigh, NC. 2022 Takeuchi TL12R Compact Track Loader, Enclosed Cab, Heat, A/C, Hour Meter Reads: 739.8 (Unverified), S/N 412104704 All equipment is sold “As Is, Where Is”. Reasonable offers will
                                              EWS 40.65321809DW02, ER32, BMT65, Axial Driven, 5000 RPM, 50Nm, 1:1
                                              $RFQ
                                              EWS 40.65321809DW02, ER32, BMT65, Axial Driven, 5000 RPM, 50Nm, 1:1
                                              Serial No. K10030112 SPECIFICATIONS: Clamping Range............Ø0.118" - 0.787" (3-20mm) Spindle Collet Type............ER32 Torque - Maximum............36.88 ft-lbs. (50 Nm) Speed - Maximum........
                                              Hammond UBG-8-8, 8"Ø x 2.5"W Wheels, 2 HP, 5500 RPM, Dry Ope
                                              $RFQ
                                              Hammond UBG-8-8, 8"Ø x 2.5"W Wheels, 2 HP, 5500 RPM, Dry Ope
                                              Serial No. 01457 SPECIFICATIONS: Wheel Diameter............8" Wheel Width............2" Wheel Speed............5500 RPM Motor Horsepower............2 HP Operation Type............Dry Electrics.........
                                              Hammond UBG-8-8, 8"Ø x 2.5"W Wheels, 2 HP, 5500 RPM, Dry Ope
                                              $RFQ
                                              Hammond UBG-8-8, 8"Ø x 2.5"W Wheels, 2 HP, 5500 RPM, Dry Ope
                                              Serial No. 01457 SPECIFICATIONS: Wheel Diameter............8" Wheel Width............2" Wheel Speed............5500 RPM Motor Horsepower............2 HP Operation Type............Dry Electrics.........
                                              Ramco MK36ESS, 21"L x 36"W x 18"H, 150 Lbs. Part Cap., Agita
                                              $RFQ
                                              Ramco MK36ESS, 21"L x 36"W x 18"H, 150 Lbs. Part Cap., Agita
                                              The Ramco Migi-Kleen is an immersion parts washer designed for the removal of oils, chips and dirt from a wide range of components. It accomplishes this using a simple and rugged pneumatically powered reciprocating platf
                                              Ramco MK36ESS, 21"L x 36"W x 18"H, 150 Lbs. Part Cap., Agita
                                              $RFQ
                                              Ramco MK36ESS, 21"L x 36"W x 18"H, 150 Lbs. Part Cap., Agita
                                              The Ramco Migi-Kleen is an immersion parts washer designed for the removal of oils, chips and dirt from a wide range of components. It accomplishes this using a simple and rugged pneumatically powered reciprocating platf
                                              47"Ø x 19"H PERKUTE Clean-O-Mat 120SP-VA, Spray, Top Load, 3
                                              $RFQ
                                              47"Ø x 19"H PERKUTE Clean-O-Mat 120SP-VA, Spray, Top Load, 3
                                              Year - 2004 SPECIFICATIONS: Basket Diameter............46.8" Usable Height............19.69" Loading Height............32.68" Basket Load - Maximum............1,102 Lbs. Liquid Volume............55
                                              7" x 12" MSC 09518879, 7" Round Cap, 3/4" Blade, 85/130
                                              $RFQ
                                              7" x 12" MSC 09518879, 7" Round Cap, 3/4" Blade, 85/130
                                              Year Built - 2005 Serial No. 570818 SPECIFICATIONS: Cutting Capacity - Maximum: - Rectangular @ 90°............7" x 12" - Rectangular @ 45°............4-3/4" - 4-7/8" - Rounds @ 90&#
                                              87 CFM @ 110 PSI Kaeser SK 26, 20 HP, 67 dBa, Kaeser SIGMA Control
                                              $RFQ
                                              87 CFM @ 110 PSI Kaeser SK 26, 20 HP, 67 dBa, Kaeser SIGMA Control
                                              Year Built - 2002 Serial No. 1148 SPECIFICATIONS: Operating Pressure............110 PSI Capacity @ Operating Pressure............87 CFM Motor............20 HP Noise Level............67 dBa Oil Capacity.........
                                              500T Beckwood Triform 16-5BD, 16"Ø Blank, 5" Tool Clearance,
                                              $RFQ
                                              500T Beckwood Triform 16-5BD, 16"Ø Blank, 5" Tool Clearance,
                                              New - 2011 SPECIFICATIONS: Tonnage............500 Chamber pressure - maximum............5,000 PSI Blank diameter - maximum............16" Form tool clearance............5" Daylight............6" C
                                              11" x 18" Hardinge HLV-H, Inch Threading, 5C Collet, 2-Axis DRO,
                                              $RFQ
                                              11" x 18" Hardinge HLV-H, Inch Threading, 5C Collet, 2-Axis DRO,
                                              Year Built - 1971 Rebuilt by Iverson - 2022* Serial No. HLV-H-4842 Motor driven with 2-Speed, 3Ph/60Hz/460 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Prec
                                              AER Control Systems DC-800, 800 CFM, 55 sq. ft. filter area, 1 HP
                                              $RFQ
                                              AER Control Systems DC-800, 800 CFM, 55 sq. ft. filter area, 1 HP
                                              AER Control Systems Dust Cab 800 Serial No. 01457 SPECIFICATIONS: Nominal Airflow............800 CFM Available External Pressure............3 In. H20 Filter Quanitity............1 Filter Surface Area............5
                                              1-1/8" Burr Oak STCOS M5, R. Hand, 36" Hitch Feed, Cut-off, Pull-
                                              $RFQ
                                              1-1/8" Burr Oak STCOS M5, R. Hand, 36" Hitch Feed, Cut-off, Pull-
                                              New - 1993 Serial No. STTPS-M5-486 CATALOG SPECIFICATIONS: Tube Capacity............3/16" - 1-1/8" Cut Length: - Standard - Minimum............3/4" - Using Pull A-part - Minimum............4-1/2&qu
                                              Doosan Puma 400LB CNC Lathe, Fanuc 0i, 15" Chuck, 30" Swing, 87&q
                                              $RFQ
                                              Doosan Puma 400LB CNC Lathe, Fanuc 0i, 15" Chuck, 30" Swing, 87&q
                                              DOOSAN PUMA 400LB CNC TURNING CENTER Model Puma 400LB, New 2012 Stock # Q12099 EQUIPPED WITH: Fanuc 0i-TD CNC Control, 15" 3-Jaw Kitagawa Hydraulic Chuck, 2 Range Geared Spindle, Automatic Tool Presetter, 12 P
                                              • Swing: 30.3"
                                              • Centers: 87"
                                                Okuma Multus U4000SB/SB-2SW/1500 5-Axis CNC Mill Turn, 2018
                                                $RFQ
                                                Okuma Multus U4000SB/SB-2SW/1500 5-Axis CNC Mill Turn, 2018
                                                OKUMA MULTUS U4000 CNC MILL TURN Model Multus U4000SB/SB-2SW/1500, S/N 217026, New 2018 Stock # Q12027 EQUIPPED WITH: OSP-P300SA CNC Control, SEE BELOW NEW B AXIS SPINDLE, 12" 3-Jaw Chuck on Main Spindle, 10&q
                                                • Swing: 29.59"
                                                • Centers: 93"
                                                  DMG Gildemeister CTX Beta 1250 CNC Lathe, Siemens 840D, 12" 3-Jaw Chuc
                                                  $RFQ
                                                  DMG Gildemeister CTX Beta 1250 CNC Lathe, Siemens 840D, 12" 3-Jaw Chuc
                                                  DMG GILDEMEISTER CNC TURNING CENTER Model CTX Beta 1250, S/N 0041000654C, New 2010 Stock # Q12018 EQUIPPED WITH: DMG MORI ERGOline® Control with Siemens Sinumerik 840DI, 12" 3-Jaw Chuck, 12" Position
                                                  • Swing: 27.6"
                                                  • Centers: 56.1"
                                                    Romi C680 CNC Lathe, Siemens Sinumerik 828D, 16" 3-Jaw & 19"
                                                    $RFQ
                                                    Romi C680 CNC Lathe, Siemens Sinumerik 828D, 16" 3-Jaw & 19"
                                                    ROMI C680 CNC TURNING CENTER Model C680, S/N 016-018876-471, New 2015 Stock # Q12017 EQUIPPED WITH: Siemens Sinumerik 828D CNC Control, 16" 3-Jaw Chuck & 19" 4-Jaw Chuck, 2 Sided Dorian Tool Post, 16&
                                                    • Swing: 26.8"
                                                    • Centers: 118"
                                                      Marvel 15A Horizontal Band Saw, Auto.Stock Infeed (2) Vises, 15" x 20&
                                                      $RFQ
                                                      Marvel 15A Horizontal Band Saw, Auto.Stock Infeed (2) Vises, 15" x 20&
                                                      MARVEL 15A HORIZONTAL BAND SAW Model 15A5/M8, S/N E-151504, New 1981 Stock # Q11957 EQUIPPED WITH: Automatic Stock Infeed w/Programmable Lengths, 10' Automatic Conveyor Feed, 40" 'Heavy Duty' Disch
                                                      • Width capacity: 20"
                                                      • Height capacity: 15"
                                                        Haas VF-6SS CNC Vert Mach Cntr, 28" x64" tbl, 12" 4th Axis R
                                                        $RFQ
                                                        Haas VF-6SS CNC Vert Mach Cntr, 28" x64" tbl, 12" 4th Axis R
                                                        HAAS 4-AXIS CNC VERTICAL MACHINING CENTER Model VF-6SS, S/N 1080475, New 2010 Stock # Q11998 EQUIPPED WITH: Haas CNC Control, 12" HRT-310 Haas 4th Axis Rotary Currently Set Up as a Trunnion with a 39" x 9
                                                        • X axis: 64"
                                                        • Y axis: 32"
                                                          Atom PT 1251 Plating Press, 23.6" x19.6" Work Area, 120T, 3.54&qu
                                                          $RFQ
                                                          Atom PT 1251 Plating Press, 23.6" x19.6" Work Area, 120T, 3.54&qu
                                                          ATOM PLATING/DIE-CUTTING PRESS Model PT 1251, S/N 10039299, New 2007 Stock # Q12016 Atom plating/press/die-cutter with mechanical limit switch for maximum precision. The machine complies with CE regulations. EQUI
                                                          • Tonnage: 120T
                                                          • Stroke: 3.54"
                                                            Haas VF3SS CNC Vertical CNC Machining Center
                                                            $RFQ
                                                            Haas VF3SS CNC Vertical CNC Machining Center
                                                            Haas VF3SS CNC Vertical CNC Machining Center Year of Mfg: 2016 ** New X Axis Ballscrew 2025 ** ** New Lube System 2025 ** ** Z Axis Ballscrew Replaced 2022 ** Power On Hours as of May 2025: 10,064 CNC Co
                                                            • X axis: 40"
                                                            • Y axis: 26"
                                                              2021 Hesse Heavy Wire Bonder Bondjet BJ959 RTR#5041739-01
                                                              $22,500
                                                              2021 Hesse Heavy Wire Bonder Bondjet BJ959 RTR#5041739-01
                                                              Equipment located in Salem, OR. 2021 Hesse Fully Automatic Heavy Wire Bonder Bondjet BJ959 w/ Hesse RBK03X-2277 Bond Head & Stereo-Microscope Leica M50 w/ Adapter Arm, S/N: BJ959-0142 All equipment is sold “As Is,
                                                              2012 Bobcat T650 Compact Track Loader RTR#503610-01
                                                              $12,000
                                                              2012 Bobcat T650 Compact Track Loader RTR#503610-01
                                                              Equipment located in West Monroe, LA. 2012 Bobcat T650 Compact Track Loader, Bucket, OROPS, Hours: Unknown (Unverified), S/N: A3P015662 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered.
                                                              GMC GMM-1050EVS 10x50 in. Manual Vertical Mill w/Inverter Drive
                                                              $RFQ
                                                              GMC GMM-1050EVS 10x50 in. Manual Vertical Mill w/Inverter Drive
                                                              CALL 386-304-3720 FOR AVAILABILITY FEATURES: Made in Taiwan “Meehanite” casting Turcite “B” coating on X/Y ways like CNC mills ISO 9001 certified Inverter drive variable spindle speeds from 60-4,000 rpm Heavy du
                                                              • Table width: 10"
                                                              • Table length: 50"
                                                                1999- 55 Ton Amada RG-50 CNC Press Brake
                                                                $RFQ
                                                                1999- 55 Ton Amada RG-50 CNC Press Brake
                                                                Capacity 55 Tons Overall Bending Length 82" Distance Between Housings 59.84" Stroke 3.9" Open Height 14.57" Throat 15.75" Closed Height 10.67" Main Motor 5 HP Dimensions 80" x 5
                                                                • Tonnage: 55T
                                                                  1996- 55 Ton Amada RG-50 CNC Press Brake
                                                                  $RFQ
                                                                  1996- 55 Ton Amada RG-50 CNC Press Brake
                                                                  Capacity 55 Tons Overall Bending Length 82" Distance Between Housings 59.84" Stroke 3.9" Open Height 14.57" Throat 15.75" Closed Height 10.67" Main Motor 5 HP Dimensions 80" x 5
                                                                  • Tonnage: 55T
                                                                    1985 - 55 Ton Amada RG-50 CNC Press Brake
                                                                    $RFQ
                                                                    1985 - 55 Ton Amada RG-50 CNC Press Brake
                                                                    Capacity 55 Tons Overall Bending Length 82" Distance Between Housings 59.84" Stroke 3.9" Open Height 14.57" Throat 15.75" Closed Height 10.67" Main Motor 5 HP Dimensions 80" x 5
                                                                    • Tonnage: 55T
                                                                      Makino DUO 43 Electrical Discharge Machine
                                                                      $RFQ
                                                                      Makino DUO 43 Electrical Discharge Machine
                                                                      Makino DUO 43 Electrical Discharge Machine Year of Mfg: 2011 CNC Control: Makino MGW-S6 Table Size: 27.9" x 22" Maximum Load on Table: 1,764 lbs Travels: X Axis: 17.7" Y Axis: 11.8" Z Axis
                                                                      • X axis travel: 17.7"
                                                                      • Y axis travel: 11.8"
                                                                        Makino V80S 5 Axis CNC Machining Center
                                                                        $RFQ
                                                                        Makino V80S 5 Axis CNC Machining Center
                                                                        Makino V80S 5 Axis CNC Machining Center Year of Mfg: 2018 **New Spindle Installed By Makino 2024, little usage since** Hours as of 5-14-2025: Power On: 30,172 Auto: 12,691 Spindle: 12,517 CNC Control:
                                                                        • X axis: 51.2"
                                                                        • Y axis: 39.3"
                                                                          1250 MT PRESEZZI BRASS ROD OIL HYDRAULIC EXTRUSION PRESS LINE W/ OCN HANDLING SYSTEM Sto
                                                                          $RFQ
                                                                          1250 MT PRESEZZI BRASS ROD OIL HYDRAULIC EXTRUSION PRESS LINE W/ OCN HANDLING SYSTEM Sto
                                                                          Tonnage 1250 metric-tons Billet 145 milli
                                                                          15 TON OCN MDL 3/15.80 SX BAR TO BAR DRAWING LINE (14497)
                                                                          $RFQ
                                                                          15 TON OCN MDL 3/15.80 SX BAR TO BAR DRAWING LINE (14497)
                                                                          15 TON OCN MDL. 3/15.80 SX BAR TO BAR DRAWING LINE - NEW 2009Stock # 14497MANUFACTURER – OCN (ITALY)YEAR – 2009CURRENT MATERIAL – BRASS BARBAR TYPES – ROUND, SQUARE, HEXAGONALMAXIM
                                                                          RUESCH TUB TYPE WET WIRE DRAWING MACHINE (14469)
                                                                          $RFQ
                                                                          RUESCH TUB TYPE WET WIRE DRAWING MACHINE (14469)
                                                                          MANUFACTURER: H.J. RUESCH & CO.TYPE: TUB TYPE FINE WIRE DRAWING MACHINENO. OF DIES: 11TWIN HORIZONTAL BLOCKSBLOCK SIZE:-5" (127 MM) DIAMETER-9" (228 MM) WIDETUB TYPE WIRE DRAWER WITH SPRAY LUBRICATIONPAYOFF:-TYPE
                                                                          6,000 LB. RAPID AIR NON-MOTORIZED UNCOILER MODEL R6000.12N , STOCK # 14456
                                                                          $RFQ
                                                                          6,000 LB. RAPID AIR NON-MOTORIZED UNCOILER MODEL R6000.12N , STOCK # 14456
                                                                          Max Weight of Coil 6000 pounds Max Width of Coil
                                                                          9" VERTICAL WIRE DRAWING BLOCK (14426)
                                                                          $RFQ
                                                                          9" VERTICAL WIRE DRAWING BLOCK (14426)
                                                                          TYPE: SINGLE DIE WIRE DRAWING BLOCKAXIS: VERTICALBLOCK DIAMETER: 9"BLOCK FACE WIDTH: 4"NO. OF DIES: 1PURCHASER MUST PROVIDE DIE HOLDERDRIVE MOTOR:-MANUFACTURER: DAYTON DC GEARMOTOR-MODEL" 62418A-RATIO 11.8 TO 1-1/2 HP, 1
                                                                          FENN Hydraulic Swager Feed Table 14355
                                                                          $RFQ
                                                                          FENN Hydraulic Swager Feed Table 14355
                                                                          FENN HYDRAULIC SWAGER FEED TABLEStock # 14355Serial #..........5871-01Feed Unit:........93" x 35" x 55"           &nb
                                                                          3" RUESCH 11 ROLL LEVELER (14322)
                                                                          $RFQ
                                                                          3" RUESCH 11 ROLL LEVELER (14322)
                                                                          Max Width of Workpiece 3 inches RUESCH 11 ROLL LEVELERStock # 14322SPECIFICATIONS&n
                                                                          16" ROBINSON RENCO WIRE DRAWING DEADBLOCK [14043]
                                                                          $RFQ
                                                                          16" ROBINSON RENCO WIRE DRAWING DEADBLOCK [14043]
                                                                          (Used) 16" Diameter Robinson Renco Wire Drawing Deadblcok Machine # 14043 Type Machine: Wire Drawing Deadblock Model: 16DB30VF Serial Number: 3563 Finish Blo
                                                                          MATSUURA MX-520 PC4, 5 Axis Trunnion, 90 ATC, 12000 RPM CNC Vertical Machining Center, 900
                                                                          $RFQ
                                                                          MATSUURA MX-520 PC4, 5 Axis Trunnion, 90 ATC, 12000 RPM CNC Vertical Machining Center, 900
                                                                          CNC Control yes Type of CNC Control Fanu
                                                                          2024 Vermeer S925TX Mini Stand-On Skid Steer RTR#5013052-01
                                                                          $29,000
                                                                          2024 Vermeer S925TX Mini Stand-On Skid Steer RTR#5013052-01
                                                                          Unit located in Pompano Beach, FL. 2024 Vermeer S925TX Mini Stand-On Skid Steer, Kubota V1505 Diesel Engie, Hyd Transmission, Bucket, Power Steering, Hour Meter Reads: 48 (Unverified), S/N: 1VRL0705PR1009186 All equipm
                                                                          2019 John Deere 650k Dozer w/ Blade RTR#4123303-01
                                                                          $80,000
                                                                          2019 John Deere 650k Dozer w/ Blade RTR#4123303-01
                                                                          Unit located in Guntersville, AL. 2019 John Deere 650k Dozer w/ Blade, PowerTech PWX Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, AM/FM Radio, Hour Meter Reads: 3,159 (Unverified), S/N: 1T0650KKHJF341740
                                                                          2017 Bobcat E35I Mini Excavator w/ Bucket RTR#4103270-01
                                                                          $22,000
                                                                          2017 Bobcat E35I Mini Excavator w/ Bucket RTR#4103270-01
                                                                          Unit located in Candler, NC. 2017 Bobcat E35I Mini Excavator w/ Bucket, T4 Diesel Engine, Hyd Transmission, Open Cab, Hyd Thumb, Hour Meter Reads: 1,770 (Unverified), S/N: AUYM14262 All equipment is sold “As Is, Where
                                                                          Panel Saw 13Amp DeWalt
                                                                          $999
                                                                          Panel Saw 13Amp DeWalt
                                                                          Panel Saw 13Amp DeWalt Model: 3486 TY4 [DeWalt] S/N: 88450042 Panel Saw w/10' Frame; 5' Cutting Height 13Amp; 1Ph; 115Volt
                                                                          2000 - 22 Ton Amada Vipros 255 CNC Turret Punch
                                                                          $RFQ
                                                                          2000 - 22 Ton Amada Vipros 255 CNC Turret Punch
                                                                          Capacity 22 Tons Max Sheet Size (w/repo) 50 x50" Max Hole Diameter 3.5" Max Punch Capacity 1/4" Ram Stroke 1.575" Adjustable Turret Style Thick Turret Stations 31 Stations w/ (3) A/I Weight 21,
                                                                          • Tonnage: 22T
                                                                            2013 - 6000 Watt Bystronic Autonom 3015 CNC Lase
                                                                            $RFQ
                                                                            2013 - 6000 Watt Bystronic Autonom 3015 CNC Lase
                                                                            Resonator Wattage 6,000 Watts Max Sheet Size 5' x 10' X-Axis Travel 120" Y-Axis Travel 60" Max Workpiece Weight 1962 lbs. Approx. Machine Weight 26,500 lbs. Overall Dimensions (approx.) 34' x
                                                                            • Wattage: 6000W
                                                                            • X axis travel: 10'
                                                                              Accurpress 100 Ton x 12' CNC Hydraulic Press Brake
                                                                              $RFQ
                                                                              Accurpress 100 Ton x 12' CNC Hydraulic Press Brake
                                                                              Accurpress 100 Ton x 10' CNC Hydraulic Press Brake S/N: 11251, Mfg: 2012, Stock No: 18368 Model: 710010. Capacity: 100 Tons Overall Bed Length: 120" Distance Between Housings: 100" Stroke: 8" T
                                                                              • Tonnage: 100T
                                                                                South Bend Lathe SB1049 13" x 30"
                                                                                $16,000
                                                                                South Bend Lathe SB1049 13" x 30"
                                                                                Like new condition, gently used in a private shop for personal use. OBO
                                                                                MT Marchetti DWO1540132, BMT65, ER32, 6000 RPM, 1:1, 100 Nm, 2023
                                                                                $RFQ
                                                                                MT Marchetti DWO1540132, BMT65, ER32, 6000 RPM, 1:1, 100 Nm, 2023
                                                                                Year Built - 2023 New - Never Used SPECIFICATIONS: Spindle Collet Type............ER32 Speed - Maximum............600 RPM Ratio............1:1 Torque - Maximum............73.7 ft-lbs (100 Nm) External Cooling...
                                                                                Wisconsin Walk-in, 61" x 61" x 60"L, 600G, gas fired
                                                                                $RFQ
                                                                                Wisconsin Walk-in, 61" x 61" x 60"L, 600G, gas fired
                                                                                Double door opening, 60" x 60" x 60" work area, 600F, aluminized steel interior, insulated floor with wheel guide channels, combination air-flow, gas fired (400,000 BTU/Hr.), Eurotherm 3504 programmable co
                                                                                • Chamber width: 61"
                                                                                • Chamber length: 60"
                                                                                  Hardinge HLV-H Pcision Tool Room Lathe, Newall DRO, 3,000 rpm. New 2000
                                                                                  $RFQ
                                                                                  Hardinge HLV-H Pcision Tool Room Lathe, Newall DRO, 3,000 rpm. New 2000
                                                                                  HARDINGE PRECISION LATHE MODEL: HLV-H, S/N: HLV-H-15475-T, NEW: 2000 MACHINE RECONDITIONED IN 2024 SPECIFICATIONS: SPINDLE CONSTRUCTION.................... HARDINGE BALL BEARING SPINDLE NOSE THREAD ..............
                                                                                  • Swing: 11"
                                                                                  • Centers: 18"
                                                                                    Devlieg Cast Iron Angle Plates - 30"H x 16-1/2"W x16"D
                                                                                    $RFQ
                                                                                    Devlieg Cast Iron Angle Plates - 30"H x 16-1/2"W x16"D
                                                                                    DEVLIEG 4-PIECE CAST IRON MATCHED ANGLE BLOCK SET S/N: A-91350 & B-91350 SPECIFICATIONS: TOTAL HEIGHT ........................ 30" TOTAL WIDTH ......................... 16-1/2" TOTAL DEPTH ........
                                                                                    • Width: 16.5"
                                                                                    • Length: 16"
                                                                                      Categories:
                                                                                      Condition:
                                                                                      Manufacturer:
                                                                                      Location:
                                                                                      Price:
                                                                                      •  to 
                                                                                      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>