NEW SCOTCHMAN MANUAL COLD SAW
w/POWER CLAMP
MODEL: CPO 275 PK
*MADE IN THE USA*
STANDARD EQUIPMENT & FEATURES:
Air-operated clamp for material vise
Operator controlled trigger switch
Double self-centering vise assures burr-free cuts
Miter capabilities 45 degrees left to 45 degrees right
Capable of slotting
Two cutting speeds
Hardened and ground worm and wheel gear box
Worm wheel of top quality bronze
Chip drawer
Seven-gallon coolant tank with pump
One 10" diameter (250 mm) HSS blade
One blade wrench
One gallon concentrated coolant
230 or 460 volt/3-ph electrics (must specify voltage)
3 year warranty on parts
MAXIMUM CAPACITIES:
WITH A 275 MM/10-3/4" BLADE
TUBING
Round
@ 90 degrees: 3-3/8" (86 mm)
@ 45 degrees: 2" (51 mm)
Square
@ 90 degrees: 3" x 3" (76 x 76 mm)
@ 45 degrees: 2" x 2" (51 x 51 mm)
Rectangle
@ 90 degrees: 3" x 2-3/8" (76 x 60 mm)
@ 45 degrees: 3" x 2" (76 x 51 mm)
SOLID
Round
@ 90 degrees: 1-1/2" (38 mm)
@ 45 degrees: 1" (25 mm)
Square
@ 90 degrees: 1-1/2" x 1-1/2" (38 x 38 mm)
@ 45 degrees: 1" x 1" (25 x 25 mm)
SPECIFICATIONS:
CUTTING SPEEDS (must specify when ordering)
LT (low turn) designed for solid mild steel, solid stainless steel, & thick wall pipe
30/60 rpm, 2 hp
HT (high turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material
60/120 rpm, 1.5 hp
SS (single speed) designed for 220 1-ph applications [note: additional cost for this model]
60 rpm, 2 hp
Factory wired (specify) ................... 208/230/460/575v 3-ph 60 Hz (LT & HT models)
................... 220v 1-ph 60 Hz (SS model only)
Maximum blade diameter .................... 10-3/4" (275 mm)
Arbor bore ................................ 1-1/4" (32 mm)
Pin spacing ............................... 2/8/45
Width ..................................... 21-7/8"
Depth ..................................... 43-1/2"
Height
Not incl. feed handle .................... 53-1/4"
From floor to vise ....................... 36-1/8"
Shipping weight ........................... 580 lbs. (263 kg)
OPTIONS (CALL FOR PRICING):
Blades
Square tube jaws
Special clamping fixture
Blade guide laser light
60" or 120" material stop roller conveyor mounted with an advanced measuring quick-loc system
(available left to right or right to left material feed)
10' and 20' material supply track
96" or 144" SG programmable stop system
(supplied w/roller conveyor & designed for either right to left or left to right stop position)
*We will meet or beat virtually any price on the web. We also offer special financing deals with integrated discounts for qualified customers.
FOR MORE INFORMATION: Call Rob at 973-497-7570