12.6" X 20" OKAMOTO MODEL #OGM-1220UNCIII
CNC UNIVERSAL CYLINDRICAL GRINDER
WITH FANUC OiTD CNC CONTROL,
MARPOSS IN-PROCESS GAUGING,
SBS AUTO WHEEL BALANCING,
LATERAL LOCATOR, AND MORE!
Model: OGM-12.20UNCIII S/N: 36150 New: 2013
Special Note:
7,369 Cutting Time Hours
9,864 Run Time Hours
21,985 Power On Hours
Swing Over Table .............. 12.6"
Distance Between Centers:...... 20"
Max. Diameter to be Ground .... 12.0"
Max. weight between centers ... 330 lbs.
Grinding Wheel Size:........... 14" x 1.5" x 5
Grinding Wheel Speed:.......... 1,610 RPM
Wheelhead, Total Stroke
(X-axis) ..................... 11.8"
Wheelhead Swivels ............. +/- 30°
Wheelhead Automatic Infeed .... 0.00001" to 0.004"
Minimum Increment ............. 0.00001"
Wheelhead Power rapid Stroke .. 1.5"
Rapid Feedrate ................ 157" IPM
Manual Pulse Generator ........ 0.00001", 0.0001", 0.001"
Grind Feed Overide:............ 0 - 200%
Max. Table Travel ............. 34"
Swivel Angle .................. 0 - 5°
Power Table Traverse Speed .... 0 to 394" IPM
Manual Pulse Generator ........ 0.00001", 0.0001", 0.001"
Sparkout, Plunge Grind ........ 0 to 10 Seconds
Sparkout, Traverse Grind ...... 0 to 10 Cycles of Table
Work Head Center Taper ........ MT #4
Work Head Swivel Angle ........ +30°/- 90°
Work Head Spindle Bore ........ 0.7"
Work Head Spindle Speed ….... 10 - 500 RPM
Tailstock Taper ............... MT #4
Tailstock Spindle Stroke ...... 1"
Grinding Wheel Spindle Motor .. 7.5 HP
Wheelhead Feed Motor .......... 1.6 HP AC Servo
Table Feed Motor .............. 1.6 HP AC Servo
Work Head Spindle Motor ....... 2.4 HP AC Servo
Machine Weight:................ 10,500 lbs.
Approx. Dims. of Machine .... 134" x 92"D x 77"H
Machine Features:
Fanuc Oi-TB CNC Control
Two Axis Simultaneous CNC Control
CNC Programming, for Contouring, Multiple Diameters,
& Dressing
Minimum Programmable Increment 0.00001"
Conversational or G and M Code Programming Std
Quick, Easy Set-up, Designed for Optimum Operator
Convenience
Fanuc Red Cap Servo Motors for the Axis Movements
Low Friction Material is Applied to the Sliding
Surfaces of Slide Table & Wheel head.
Coolant System
Machine is Wired for 3/60/220 Volts, 20 KVA Service
Equipped with:
Laeral Locator
Marposs "E-9" In-Process Gauge Amplifier
Marposs "Unimar S" Measuring Gauge Heads
SBS Automatic Wheel Balancing System
Coolant System with Paper Filtration
Dial Indicator for Table Swivel Adjustment
Machine Tool Enclosure
Work Light
Special Note:
Swing Down I.D. Attachment & I.D. Spindle Can
Be Purchased from Okamoto **
** Just Arrived - Low Hours, Beautiful - Original Paint **
** Superior Condition & Appearance **
** Inspect Under Power in Our Harrison, NJ Warehouse **
FOR MORE INFORMATION: Call Andy at 973-497-7600