MACHINE #11852
SPECIFICATIONS
-MANUFACTURER: ACCURATE WIRE
-TYPE: WIRE FLATTENING LINE
-ALL COMPONENTS MOUNTED ON A COMMON BASE
-SPEED: 800 FPM (243 MPM)
-VOLTAGE: 208 VOLTS
LINE CONSISTS OF THE FOLLOWING:
(1) TYPE: WIRE FLATTENING MILL
-ROLL SIZE
-DIAMETER: 4" (101.6mm)
-ROLL FACE: 1" (25.4 mm)
-ROLL TYPE: CARBIDE SHELL/ WATER COOLED
-NOTE: NO COOLING SYSTEM IS INCLUDED WITH LINE
-COLUMN SIZE: 1 7/8" X 1 1/2" (47.6mm X 38.1mm)
-WINDOW OPENING: 4 1/2" (114.3mm)
-SCREWDOWN TYPE: MANUAL
-SPEED REDUCTION: VIA TIMING BELT FROM DRIVE MOTOR TO PINION STAND
-MAIN DRIVE MOTOR: ORIGIALLY 10 HP (5.8Kw) 1750 RPM 240 VOLTS DC-
MOTOR FRAME SIZE 219AT, NOT INCLUDED CUSTOMER TO
SUPPLY MOTOR
(1) DANCER: 3 ROLL- 2 FIXED AND 1 MOVABLE
CENTER ROLL MOVES UP AND DOWN TO OPERATE AS A
SPEED CONTROL BETWEEN THE TRAVERSING SPOOLER AND
THE MILL STAND BEFORE IT. CENTER ROLL IS SPRING
LOADED IN THE TOP POSITION TO APPLY TENSION ON
THE WIRE AND A SPEED SIGNAL IS SUPPLIED TO THE
DRIVE BY MEANS OF A POTENTIOMETER. CUSTOMER TO
SUPPLY DANCER ROLLS
-ROLL SIZE: 4" (101.6mm) DIAMETER
(1) WIPER BOX
(1) TRAVERSING SPOOLER
-TYPE: HYDRAULIC TRAVERSING
-SPOOL SIZE
-TYPE: PLASTIC
-DIAMETER: 6" (152.4mm)
-FACE WIDTH: 4" (101.6mm)
-DRIVE MOTOR: 2 HP (1.15Kw) 1750 RPM 180 VOLT DC
(1) DRIVE SYSTEM: SSD ELECTRONIC DC DRIVES
APPROXIMATE FLOOR SPACE: 101" LONG X 51" WIDE X 60" HIGH
APPROXIMATE WEIGHT: 5,000 LBS
**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**

This machine is listed for sale by Machinery International Corp located in North Branford, Connecticut