SAWTRAX Sign Maker's Series 52-100 inch Vertical Panel Saws |
|
Stock Code: |
C52SM |
Price: | $RFQ |
Subcategory: | Vertical Panel Saw & Wallsaws |
Manufacturer: |
Saw-Trax |
Model: |
Sign Maker' |
Condition: | New |
CALL 386-304-3720 FOR AVAILABILITY
FEATURES:
SAWTRAX Sign Maker's Series 52" - 100" Vertical Panel Saw with Makita Saw and Substrate Cutter
Sign Maker’s Series Vertical Panel Saw with Makita Saw and Substrate Cutter
The Sign Maker's Saw That Is The Industry’s Premier Panel Saw and Substrate Cutters. Ours uses the Makita 5007 Saw Motor and OLFA Segmented Knife.
Today's sign shops have needs that are unique to their industry. Restricted floor space, exceptional dust sensitivity and a wide variety of substrates and composite materials of different thicknesses are just a few. They use cutting-edge materials to stand up to the different environments where their work will be displayed. In the past, you needed two cutters, a panel saw for your rigid material and a substrate cutter for your softer material. This arrangement was expensive and took up twice the floor space.
Some shops settled for just a substrate cutter. They were limited to what material they can cut, the size blank they could cut, how thick the material they could use and had to settle for only vertical cuts.
With the Sign Maker Panel Saw and Substrate cutter, sign shops now have one machine for all of their cutting needs; you no longer need to buy a panel saw AND a mat-cutter. It is equipped with specialty accessories for cutting all of the substrates, hard and soft, used in the sign industry in both directions, vertically and horizontally. This "all-cutting" substrate cutter is ideal for making precision cuts in sheet goods that are up to 1-3/4 inches thick.
Frame never goes out of square
Mobility with folding stand and transport wheels
Cuts all sign making material in both directions
Cut accuracy of 1/64"
Smooth repetitive carriage movement
Ten second tool swap
Cut thin or thick material up to 1-3/4"
Minimal set up time
Industry leading material support
Rip cut in either direction
Utilize stop block with bar on left or right
Saw cover blade window with light
Standard 7.25" saw blade
Non-proprietary Makita saw
STANDARD EQUIPMENT:
Accu-Square Alignment System
Accu-Glide Sealed Bearing System
Quick Release Carriage with 2 Locks
Retraction Mechanism
Powder Coated Steel Frame
Nickel Chrome Plated Guide Tubes (Zinc Plated 88"/100")
Center Material Support
Cord Holder
SPECIFICATIONS:
Material Rollers - Plastic: 10 (compact) / 18 (full size)
Maximum Cross Cut: 52" (C52SM/FS52SM) / 64" (C64SM/FS64SM) / 76" (FS76SM) / 88" (FS88SM) / 100" (FS100SM)
Maximum Rip Cut: Unlimited
Maximum Cut Thickness: 1-3/4"
Saw Blade Diameter: 7-1/4"
Arbor Diameter: 5/8"
Saw Motor, Makita 5007F: 15 amp - 120V
Frame Height (set up): 78" (C52SM/FS52SM) / 90" (C64SM/FS64SM) / 102" (FS76SM) / 114" (FS88SM) / 126" (FS100SM)
Frame Width (set up): 65-1/4" (compact) / 122" (full size)
Frame Depth-Stand closed with Saw: 15"
Frame Depth-Stand open: 40"
Shipping Weight: 347 lbs. (C52SM) / 367 lbs. (C64SM) / 430 lbs. (FS52SM) / 470 lbs. (FS64SM) / 490 lbs. (FS76SM) / 555 lbs. (FS88SM) / 655 lbs. (FS100SM)
OPTIONAL MODELS:
C52SM: 52" Cross Cut - Compact
C64SM: 64" Cross Cut - Compact
FS52SM: 52" Cross Cut - Full Size
FS64SM: 64" Cross Cut - Full Size
FS76SM: 76" Cross Cut - Full Size
FS88SM: 88" Cross Cut - Full Size
FS100SM: 100" Cross Cut - Full Size
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida