Striebig Control Automatic Vertical Panel Saw
Vertical Panel Saw & Wallsaws
|Year of Manufacture:
Striebig Control Vertical Panel Saw - The ultimate automatic traveling panel saw
Push button control - and everything runs automatically
. Cuts 5' 6" x 14' 1" (larger frames available)
. Very stable, all welded steel frame suitable for free-standing or wall-mount installation
. Convenient, sturdy, mid-shelf allows for comfortable working of small parts
. Automatic locking of the heavy-duty panel support rollers when cutting cycle is started
. Automatic, mechanical, upward-shifting support grid with full support for thin or small material
. Digital measuring is standard with fine adjustment, easy reference setting, push-button changeover from rollers to mid-shelf to strip cutting, and selectable display increments
. Second measuring channel with three auxiliary stops for repeat cuts
. TRK dust collection system exceeds European standards; note: requires external collector
. Vertical cutting stations 40 inches on center (1 meter optional)
. Automatic locking of beam at cutting stations; push-button unlocking
. Control panel displays operating hours and faults (language is selectable)
. Equipped with 7-1/2 hp, 220/440 volt, 3-phase motor with electric brake
. 300 mm (11-7/8") HFG carbide saw blade
. Template bar with six stops for setting typical horizontal cuts
. Automatic saw travel with variable feed rate 10-30 m/min. (33-98 ft./min.)
. Selectable sawing cycle (cut and return, or cut and stop)
. Panel end sensor to save time (instead of having to travel to end of saw)
Cut capacities: 14' 1" x 5' 6" standard (larger capacities available); depth 3-1/8" (80mm)
Weight (approx.): 2150 lbs. (net), 2900 lbs. (gross)
Main Saw Blade: 300 mm dia., 30 mm bore with (2) 9 mm pin holes (60 mm circle)
Scoring Saw Blade: (option) 80 mm dia., 20 mm bore, special shimless split-blade type
Electrical: 3-phase, 220V/20 Amp or 440V/10 Amp service; right side of frame
Dust collection: 1500 cfm, 100 mm dia. (x 2) connection; choice of side
Compressed air: 100 psi, 3 cfm (air dryer strongly recommended); right side of frame
Floor Space: 18' 6" L x 4' 11" D x 8' 1" H (machine only) - Other frame sizes available upon request
Striebig invented vertical panel saws and has been developing them for 40 years. As a result of this focus on one product, the Striebig Panel Saw, this machine currently offers an unparalleled degree of service and perfection. The new generation of Evolution and Control machines is an unmatched further development through to total automation. All working procedures and handling are faster and easier resulting in a clear increase in economy of use. Evolution and Control machines are the vertical panel saws of the future. They combine precision, speed, convenience and easy handling in an ideal design.
The new rigidly welded and optimized saw frame is the basis of this precision. The guide rails and elements for the saw beam and saw unit are manufactured to an accuracy of 1/100 mm. In conjunction with the digital measuring system, (integrated as standard), cuts that are accurate to 1/10 mm. are guaranteed.
Edge-trimming on four sides without turning (option). With Striebig's new saws, you can trim the edges of panels up to 5,300 mm. in length and 2,185 mm. in height without having to turn them. This slashes time requirements, eliminates damaged edges and means that there is no need for the operator to turn any heavy panels.
Everything you need to make saw cutting faster and more convenient. Striebig panel saws are impossible to confuse with other brands of saws. This is especially true of the new generation, which sets new standards.
VSA Scoring Unit
4SB Bottom Edge Trimming
EPS Programmable stop system
WSG Angle Cutting Device
ACM Cutting & Grooving
This machine is listed for sale by Colonial Saw, Inc.
located in Kingston, Massachusetts