buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Millers & Milling Machines > Vertical Millers    < Back

SHARP Vertical Mill Package LMV-42K - $RFQ

Item Number: #00144965
SHARP Vertical Mill Package LMV-42K

SHARP Vertical Mill Package LMV-42K
Stock Code:  LMV-42K
Price: $RFQ

Vertical Millers

Table width9"
Table length42"
Manufacturer:  U-S-Industrial
Model:  LMV-42K
Condition: New


ISO 9002 certified: Quality up to world industry standards
Meehanite casting: Highest grade of casting possible.
A pair of high out-put fans: Keeps head and 3-hp motor cool, to run jobs for extended periods without damaging the motor, belts and bearing
A pair of precision ABEC-7 angular contact bearings to support spindle. The quill is ground and chromed to fit the housing: This insures a spindle runout of 0.0002” T.I.R.
Motor shaft and VariDrive pulleys are dynamically balanced, then chromed for a flawless fit, ground ribs on inside diameter: For smooth speed changes.
Motor shaft has an oil channel in the center that is fed by grease fitting on the lower end: To keep VariDrive pulley moving smoothly on the shaft
This LMV mill uses a roller bearing for the lower support of the shaft: It ensures proper loading, support and alignment. It also prevents the shaft from being distorted by the tension of the belt: For quiet, accurate operation at any speed for years and years.
One shot lubrication system: For lubrication of ways and lead screws. (X, Y and Z-axis)
Hand scraped saddle and knee: For better oil retention. It avoids having chips and dirt embed in the knee and damage the sliding surface
Oil groove are milled: For maximum lubrication on all wear areas
Table and saddle backlash is controlled by double nut design: Keeps lead screw in contact with bronze nuts all times to keep backlash at .0008” within 20”.
Table and saddle are mounted with thrust bearings that are preloaded: Eliminating endplay for precisely controlled lateral movement.
Patented knuckle design uses 6 bolts 3 per side, securing them from the outside:This method locks the head securely resulting in better accuracy and performance.
Ways are hard chrome dovetail on saddle and column
3HP Motor
Variable Speed Drive (60-4500 RPM)
R-8 Spindle
Dual Cooling Fans
Meehanite Casting
Chromed Ways
Self-Lubricating Motor Shaft Extends Pulley Life
Abec-7 Super Precision Spindle Bearings

One Shot Lube System
Hard-Chromed Ways
Front and Rear Rubber Way Covers
Tool Kit Includes:
Machine Manual Half Nut Wrench 17m & 19m, set of 6 Allen Wrenches, Philip Screw Driver, Flat Head Screw Driver, Oil Can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, & Can of Paint.
Wired 220V or 440V. Please Specify

Working surface: 9" x 42"
T-slot number, size: 3 Slots, 5/8”

Travels (X, Y, And Z): 30” x 12” x 5”
Ram Travel: 12"
Knee travel: 16"
Spindle to column (min-max): 6 3/4”-18 1/2”
Spindle to nose to table (min-max): 2 1/8”-18”

Spindle Motor: 3 HP
Spindle Nose Taper: R8
Spindle Variable Speed Drive: 60-4500 Rpm
Quill Feed 3 Speed (IPR): 0.0015, .003, .006”
Quill diameter: 3-3/8"
Head swivel: 360°
Head Tilt (Lt. To Rt): 45°
Head tilt (up-and-down): 45°

Floor area (w x d x h): 7’ x 6.5 ’x 6.75’
Net weight: 2,400 lbs.

220V: 3KVA/8 amps
440V: 3KVA/4 amps

6” “Kurt” Vise with Swivel Base D688
Auto lube pump
Right Angle Milling Attachment with Arbor
Right Angle Milling Attachment with Arbor
“Sharp” Power Table Feed with Safety Handle (X-Axis)
(*NOTES: SP-250A installation may reduce the X-axis travel.)
X Axis Installation
“Sharp” Power Cross Feed with Safety Handle (Y-Axis)
Y Axis Installation
“Sharp” Power Knee Feed with Safety Handle (Z-Axis)
Z Axis Installation
Drill Chuck & Drill Arbor
6” Riser Block
Riser Block Installation
Coolant System with Chip Pan at Base (pump included)
“Maxi Torque Rite” Power Draw Bar
“Maxi Torque Rite” Power Draw Bar - Factory Installation
R-8 Collet (Set of 11) - 1/8”-3/4” BY 1/16”
Clamping Kit (52 pcs/Steel Rack)
Halogen Work light
CE mark
380V and 575 V transformer
UL components upgrade with electrical box ( factory order)
UL compliance certificate under State of California
Fagor Digital Readout 2-Axis X&Y (Fagor 20i)
2 Axis D.R.O. Installation
Fagor Digital Readout 3-Axis X&Y on Quill (Z) (Fagor 30i)
Fagor Digital Readout 3-Axis X&Y on Knee (Z) (Fagor 30i)
3 Axis D.R.O. Installation

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.


Contact Seller

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida

Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Address (including City, State)*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored
Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details