23" x 31" x 19" SHARP® 5-Axis Vertical Machining Center
Vertical Machining Centers CNC
|X axis: ||23"
|Y axis: ||31"
CALL FOR AVAILABILITY AND BEST PRICING!
The Sharp SVX- 500 vertical machining center is engineered to have unrivaled quality and outperform all other machines in its category. Sharp’s SVX-500 allows true 5-sided and 5-axis simultaneous machining. Unlike the 3-axis that requires a separate setup for cutting different sides of a part, the 5-axis machine requires the part to be set only once and rotated into a series of positions to machine each side without the need to reset the part. All major castings of the SVX-500 are analyzed using the Finite Element Method (FEM) to locate areas of stress and strain, multiple loading conditions from thermal, gravity, centrifugal and enforced displacement. Ribs locations are properly defined to maintain rigidity throughout the entire machine. The 5-axis is constructed using the box-in-box design to assure accuracy and rigidity under different cutting conditions.
Fixed table design, head moves along X and Y axis for maximum rigidity.
Box-in-box structure eliminates overhang on linear axes
23.6" x 31.8" x 19.7" travel (X,Y,Z)
Trunnion table with A and C axis travel.
15,000 rpm Big Plus spindle, 60M/min (2,362 ipm) rapid.
Fanuc or Siemens control.
Fanuc 31i-B5 Control, 10.4" color LCD
Fanuc 2-year warranty
AICC II (200 block look ahead)
Manual guide I
5120 M memory
3 Dimensional cutter
3D interference check
High-speed smooth TCP
3 axis (X,Y,Z) linear scale
2 axis (A/C) rotary encoder
Spindle air blast (Auto)
Automatic lubrication system
4-additional M code
M30 auto power off
Removable hand wheel M.P.G.
Safety door lock
Electric cabinet heat exchanger
LED work light
Spindle oil chiller
Cutting coolant around the spindle
Hinge type chip conveyor with bucket
Fully enclosed splash guard
Coolant system-240L tank capacity
CTS preparation (70 Bar)
Leveling bolts and pads
Adjusting tool with tool box
Voltage: 3PH 220V 60HZ/45KVA
780-49364ATS (silver)/ RAL7021 (black)
Operators manual and part list menu in English
Screen Size: 10.4"
X axis travel: 23.6" (600mm)
Y axis travel: 31.9" (810mm)
Z axis travel: 19.7" (500mm)
A axis travel: -110 ~ 20°
C axis travel: 360°
Spindle nose to table (A=0°): 2"-21.7" (50-550)
Linear system roller guide (SRN-45): 45 (Roller)
Table area: 19.7" (500mm)
Max workpiece wt.: 350 kg (770 lbs.)
T-Slot (Width x Degree): 0.7" x 45° (18 x 45°)
Speed: 15,000 rpm
Taper: CAT40 Big Plus
Bearing: Ceramic bearing
Type: Built in
Spindle oil chiller: Oil Type
Rapid traverse X/Y Axis (ipm (mm/min)): 2,362 (60,000)
Rapid traverse Z Axis (ipm (mm/min)):1,890 (48,000)
Cutting feed rate (ipm (mm/min)): 0.04-1,890 (1-48,000)
Transmission: Direct Drive
Spindle motor (Hp (Kw)): 20/25 (15/18.5)
Feed motor (Fanuc) (Hp (Kw)): X/Y/Z/C : 6(4.5), A: 7.3 (5.5)
AUTOMATIC TOOL CHANGER
ATC capacity: 30
Method of tool selection: Set tool number
ATC type: Carousel, CAT40 Big Plus
Max tool diameter (inch (mm)): 2.99" (76)
Max. tool length (inch (mm)): 11.8" (300)
Max. Tool weight (lb (kg)): 15.4 (7)
Without adjacent tool (inch (mm)): 4.9" (125)
Air blast at tool change: OK
X, Y, Z axis: Position (inch (mm)): +/-0.00006" (0.0015")
X, Y, Z axis:Repeatability (inch (mm)): +/-0.00006" (0.0015")
A axis: Position (arc seconds): +-6
A axis: Repeatability (arc seconds): +-3
C axis: Position (arc seconds): +-5
C axis: Repeatability (arc seconds): +-3
Floor space (inch (mm)): W: 91.3"(2320) x D:169" (4295)
Height (inch (mm)): 127.1" (3230)
Weight (lb (kg)): 12,750 (28,050)
Door opening (inch (mm)): 31.5" (800)
Flood coolant nozzles: 6
Coolant tank capacity (gal (L)): 63 (240)
Chip Conveyor: Hinge type
Air blower nozzle (for cutting dry): 1
Electrical: 3 Phase/45 KVA
Air: 6 CFM @ 88psi
*Siemens, Heidenhain control are also available
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida