Tube Diameter Range- 1" (25.4mm) - 6-5/8" (168.3mm)
Wall Thickness Range- 0.040" (1mm) - 0.300" (7.6mm)
Maximum Speed: 80 meters per minute,
Shaft Diameter: 110mm,
Direction: Right to Left.

ENTRY
Coil Storage Ramp
Mandrel Type Uncoiler
Hydraulic Peeler
7-Roll Straightening Machine
Shear / End-Welder
Horizontal Accumulator

FORMING SECTION
Entry straightener/side guide rolls
(4) Breakdown Forming Stands; (3) Finn Passes
Single Point Adjustment
Universal Driven thru Individual Gearbox
(2) Cluster Stands
(2) 200HP DC Motors,

WELDING SECTION
3-Roll Weld Box
Sanfeng 400Kw High Frequency Welder
Scarfing
Cooling Section

SIZING SECTION
(6) Vertical Sizing Stands
Single point adjustment
(6) Side Stands
(2) Turk-Heads
Universal Drive thru Individual Gear Boxes
200HP DC Motor

CUTOFF SECTION
Flying Cut-Off Saw
Die Accelerator, DC Servo Motor
Digital Length Control
Run-Out Table

AVAILABLE TOOLING
Rounds: 1.66"(42.16mm), 1.90"(48.26mm), 2.375"(60.325mm), 2.875"(73.025mm),

3.500"(88.9mm), 4.500"(114.3mm), 6.625" (168.275mm)
Squares: 2.00"(50.8mm) , 3.00" (76.2mm), 4.00" (101.6mm)
Wall Thickness: .100" (2.54mm) to .280" (7.11mm)

Complete Mill with Hydraulics and Electrics, Controls,
Operator Panels, Push Buttons, Heat Exchanger, Transformer

Electrics are Solid State Digital Drives w/PLC Controls Micro
Computer DC Controller, 460 Volt 3Ph 60 HZ

This machine is listed for sale by National Machinery Exchange Inc located in Newark, New Jersey