CALL FOR BEST PRICE!

FEATURES:
1.5 Motor
Two “V” way for extra accuracy in cross travel
Both ways are hand-scraped and covered with Turcite B coating
Accurate slot grinding achieved using saddle locking system
Double-nut backlash eliminator
Cross slide and column screws are hardened and ground to a 70 Rockwell C Hardness
Wire rope driven table
Main spindle run-out within 0.0001”
Automatic lubrication system

STANDARD EQUIPMENT:
Grinding Wheel (8” x 0.63” x 1.25”)
Auto Lube System
Wheel Adapter/Flange
Wheel Balancing Arbor
Work Light
Diamond Dresser
Tool Kit includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint
Wired 220v or 440v. Please specify

SPECIFICATIONS:
CAPACITY
Maximum grinding length: 18.5"
Maximum grinding width: 6.3"
Max distance: table to spindle center: 16"

TABLE
Working surface (W x L): 6" x 18.3"
Maximum longitudinal travel: 18.9"
Maximum cross travel: 7"

FEED
Hand feed per revolution (longitudinal): 4.2"
Hand feed per revolution (cross): 0.2"
Graduation of hand wheel: 0.001"
Hand feed per revolution (vertical): 0.05"
Graduation of hand wheel: 0.0001"

SPINDLE AND WHEEL
Spindle motor: 1-1/2 HP
Spindle speed: 3,600 RPM
Grinding wheel outside diameter: 8"
Grinding wheel bore: 1.25"
Grinding wheel width: 0.63"

GENERAL
Floor space (W x H x L): 83" x 40" x 48"
Net weight (approximately): 1,510 lbs.

TOTAL POWER CONSUMPTIONS
220V: 1.5KVA / 4 amps

OPTIONAL ITEMS:
CALL FOR PRICE:
KMT-1545B: 6x18 Kanetsu Permanent Magnetic Chuck
KRTW-1545: 6x18 Kanetsu Permanent Magnetic Chuck (Fine Pole)
KET-1545: 6x18 Kanetsu Electro-Magnetic Chuck w/Control
KETW-1545 A: 6x18 Kanetsu Electro-Magnetic Chuck w/Control (Fine Pole)
LBP-618: 6x18 Walker Electro-Magnetic Chuck (Fine Pole) w/ SMART-1B Control
(ALL MAGNETIC CHUCKS INCLUDE FREE INSTALLATION)
SG-05: Parallel Dresser
BS-SG/SP: Balance Stand
SG-08: Extra Wheel Adapter (Flange)
CS-A: Coolant System (12 Gal.) w/Splash Guard
SG-004: Splash Guard
DC: Dust Collector
CS&PF&MS: Coolant System w/Magnetic Separator & Paper Filter (25 GAL), 220V/440V
MCA40/PF: Coolant System w/Magnetic Separator & Paper Filter (25 GAL), 380V(for International use)
CE mark
FG-SG618: Fagor 20i D.R.O.
FG-40i-SG618: Fagor 40i D.R.O.
AR-SG618: Acu-Rite 200S D.R.O.
NW-SG618: Newall DP700 D.R.O.
FACTORY INSTALLATION

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida