WANDERER MODEL 31M HORIZONTAL SPLINE HOBBER & THREAD MILLER |
|
Stock Code: |
14924 |
Price: | $RFQ |
Subcategory: | Spline Hobbers |
Manufacturer: |
Wanderer |
Model: |
31M |
Condition: | Used |
WANDERER MODEL 31M HORIZONTAL SPLINE HOBBER & THREAD MILLER
EQUIPPED WITH: Heavy Duty Head, Universal Head for Thread Milling, (2) Steady Rests, (1) Follow Rest, Large Quantity of Change Gears, 12" 3-Jaw Chuck
SPECIFICATIONS:
Work Capacity | |
Long Thread Milling, Single & Multi Start Thread, Low/High Pitch | 1-48 mm/1/16" - 1-3/4" |
Hobbing (Spline Shafts, Polygonal Shapes, Spur Gears etc.) | |
No. of Teeth Hobbed with Heady Duty Head | 4 to 60 |
Spiral Hobbing (Single Thread) | |
No. of Teeth Hobbed with Universal Head | 4 to 90 |
No. of Theeth Hobbed with Heavy Duty Head | 4 to 60 |
Circular Milling (Grooves, Slots, etc.) with Chang Gears Out of Mesh | |
Side Milling | |
Height of Centers | 220 mm/8.66" |
Max. Work Diameter Above Saddle | 200 mm/7.87" |
Max. Work Diameter Above Bed | 440 mm /3.93" |
Length of Cutter Travel; Between Centers | 3937 mm/155" |
Length of Bed | 4,749 mm/187" |
Reduction of Length of Cutter Travel by Large Size Work Head | 100 mm/3.93" |
Reduction of Length of Cutter Travel by Large Size Work Head | |
and 3-Jaw Chcu | 250 mm/9.84" |
Max. and Min. Cutter Diameter | 120/65 mm/4.72/2.55" |
Pitch of Leadscrew | 2 TPI |
No. of Feeds at each Cutter Speed, Thread Milling | 24 |
Hobbing Feed Per Work Resolution | 0.32-5.0 mm/0.012"-196" |
No.& Range Cutter Speeds with Universal Head (9) | 27 to 160 |
Max. Cutter Diameter Heavy Duty Head | 120 x 130 mm/4.72 x 5.11" |
This machine is listed for sale by Blumberg Machinery
located in Bannockburn, Illinois