buy & sell, new & used machinery, machine tools & equipment

 
Machine Tools > Coil Processing & Handling > Slitting Lines    < Back

54" (1371mm) x 9" (228mm) LOOPCO, DUAL HEAD, 40,000# (18144 KG) COILS (13596) - $RFQ

Item Number: #00146519
54&quot; (1371mm) x 9&quot; (228mm) LOOPCO, DUAL HEAD, 40,000# (18144 KG) COILS (13596)

54" (1371mm) x 9" (228mm) LOOPCO, DUAL HEAD, 40,000# (18144 KG) COILS (13596)
Stock Code:  13596
Price: $RFQ
Subcategory: 

Slitting Lines

Year of Manufacture:  2000
Manufacturer:  Loopco
Model:  54" (1371MM) X 9" (228MM)
Condition: Used

MACHINE 13596
54" x 9.00" x 40,000# Loopco Slitting Line
Capacity: 0.010" - 0.250" Mild Steel
Coil Weight: 40,000#
Line Direction: Right to Left
Consisting of:
-Entry Coil Car: Revolvator
40,000# Capacity
60" wide Bed
72" O.D. Capacity
(2) - 5" bore hydraulic lift cylinders
Lift: Approx. 16"
Self-contained hydraulics
3 HP AC motor
Each axle individually driven by hyd. motors
Pushbutton control
Approx. 12" from floor to bottom of "V" cradle
Removable 5" high riser on bed
Overall size: 90" L x 64" W x 89" High
-Uncoiler:
20" - 24" I.D.
Hydraulic Expansion
Pumpkin Tooth Mandrel
54.5" Face Mandrel
Powered Holddown Roll w/Rubber Covered Roll
AC Motor Threading Drive w/Air Clutch
Sliding Base
Wichita Water Cooled Brake
Water Cooler for Brake
Passline: 40" from Floor to Center of Mandrel
Overall Size: 150" L x 74" W x 93" High
-Entry Unit:
Threading Table
Pinch Rolls, 8" Dia. x 56.5" Face Rolls, Idler Type
Side Guides, Manual Adj.
Passline: 47"
Overall Size: 84" L x 50" W x 75" High
-Crop Shear:
58" Long Blade
Hydra-Mechanical Upcut Type
10" Bore Hydraulic Cylinder
Entry Passline Roll
Spring Loaded Holddown
Passline: 49"
Overall Size: 109" L x 35" W x 81" High
-Flattener:
5 Work Rolls, 2 over 3
6" Dia. x 60" Face Rolls
Entry Passline Roll, 8" Dia. x 60" Face
Entry Driven Pinch Rolls, 6" Dia. x 60" Face
Individual Jackscrew Adjustment of Top Rolls by AC Motors
15 HP AC Gearmotor Drive, 1750 RPM, 230/460 V
Foote Jones Reducer w/38.4:1 Ratio
Air Clutch
Passline: 48"
Overall Size: 151" L x 70" W x 85" High
19,000 Lbs.
-(2) Slitter Heads:
Crane Type Removable Heads
Single Eccentric Arbor Adjustment
(1) - 9" Dia. x 55" Face Arbors
Entry Table
(1) - 6" Dia. x 55" Face Arbors
Entry Side Guides, Manual Adj.
Entry Passline Rolls, 4" Dia. x 59.75" Long
75 HP DC Motor, 500/2000 RPM, 500 V, w/Blower
30 HP AC Motor Threading Drive, 1760 RPM, 230/460 V
Alten Reducer w/1.837:1 Ratio
Overall Size: 9" Head: 128" L x 57" W x 81" High, 15,000 Lbs.
6" Head: 122" L x 50" W x 69" High, 10,000 Lbs.
Drive: 150" L x 46" W x 47" High, 7,500 Lbs.
-(2) Scrap Winders:
Approx. 25" W x 26" Dia. Scrap Ball Capacity
Hydraulic Motor Driven
Self-Contained Hydraulic Power Unit
15 HP AC Motor, 1760 RPM, 230/460V
Overall Size: 84" L x 52" W x 49" High (Each Winder)
-Pit Cross Over Table:
-Tension Stand:
Drag Board Type w/(3) Air Cylinders for Clamping Pressure
Entry Separator Tooling Bar, 54" Long
Entry Passline Roll
60" Long Pads
Exit Passline Roll w/Encoder
Passline: 58.5"
Overall Size: 94" L x 43" W x 79" High
-Free Standing Overarm Separator:
Deflector Roll
Threading Table to Recoiler
-Recoiler:
16" Dia. x 58" Face Drum
20" Dia. Bolt On Pads
22" Dia. x 57" Face Drum
Hydraulic Clamp and Expansion
12" Dia. Main Shaft
Hydraulic Pushoff
Lufkin (2) Speed Gear Box w/10.6:1 and 31.7:1 Ratios
200 HP DC Motor, 500/2000 RPM, 500 V w/Blower
Air Operated Holding Brake
Passline: 40" from Floor to Center of Drum
Overall Size: 180" L x 102" W x 92" High
-Exit (3) Arm Turnstile
C-Hook Type Arms
60" Long Arms
16" I.D. Capacity
With Risers for 20" and 22" I.D.s
Powered Rotation
Less Pushoff
Weight: 10,140 Lbs.
-Hydraulic Power Unit:
-Electrical Panel: Eurotherm DC Drive:
-Misc. Tooling Included.
-Removed and in Storage
**Temporary Specifications Subject to Revisions**
**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**

Contact Seller

This machine is listed for sale by Machinery International Corp located in North Branford, Connecticut

Contact the Seller
 
Machinery International Corp
  20 Commerce Drive
North Branford
CT 06471
United States
 
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Name*:
Email*:
Phone*:
Address (including City, State)*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details