buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Shears & Shearing Equipment > Shearing Machines    < Back

121" x 10 ga TENNSMITH® Low-Profile Mechanical Shear - $RFQ

Item Number: #00077889
121&quot; x 10 ga TENNSMITH&#174; Low-Profile Mechanical Shear

121" x 10 ga TENNSMITH® Low-Profile Mechanical Shear
Stock Code:  LM1010
Price: $RFQ

Shearing Machines

Manufacturer:  Tennsmith
Model:  LM1010
Condition: New


TENNSMITH'S LM1010 / LM1210 is equipped with a standard "Go-To" 30 inch back gauge system. The ball screw driven back gauge provides quick, accurate cuts. The operator simply inputs a dimension, and then presses enter, and the gauge automatically positions to that number. Please call 386-304-3720 for more details. The LM1010 is also available with the unique 2x back gauge system (LM1010-2x). This allows the operator to move the backstop from 0 to 30 inches in approximately 2 seconds with only two rotations of the handle. An optional digital readout is available for this system.
The LM Series shears are standard with four-edge, high carbon, high chrome top and bottom blades, independent, self-leveling hold down feet with neoprene inserts, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table with hand well, dual inch/metric inlaid bed scales and non-metallic gibs.
To enhance productivity, optional equipment available for the machines.
The LM1010, LM1210 also have available an air operated sheet support system. This system is available as Rear Return only: System-R drops the supported material to the rear of the machine
Please call 386-304-3720 for details

Maximum shearing capacity, Mild Steel: 10 gauge
Maximum shearing capacity, Stainless Steel: 14 gauge
Maximum cutting length: 121"

Back gauge range
30" (Go-To) (LM1010)
30" (2X) (LM1010-2X)

Strokes per minute, full length: 35
Number of hold down feet: 16
Motor - 230/460V, 3-Phase, 60Hz: 12.5 HP
Voltage (please specify): 230V/3/60 or 460V/3/60

Dimensions, less gauges (LxWxH):
145" x 39" x 60" (LM1010)
145" x 39" x 59.5" (LM1010-2X)

Floor space, gauges in position: 145" x 78" x 60"

Shipping Weight: 9,400 lbs.

All LM Series Shears are available in a reduced price "Performance Package" configuration. The Performance Package includes:
5 foot squaring arm
A pair of front support arms
Air operated sheet support system
Performance "R" system is for rear return
Digital Readout for 2x Back-gauge System
Squaring Arm, Five Foot with Dual Inlaid Inch/Metric Scale
Squaring Arm, Ten Foot with dual Inlaid Inch/Metric Scale
Additional Flip-up Stops for Squaring Arm (each)
Front Support Arms, Pair
T-Slotted Table with Two Front Support Arms with Inlaid Inch/Metric Scales
Additional Flip-up Stops for T-Slotted Support Arms and Table (each)
Power Back-gauge 30-Inch Travel
Protractor Attachment
Work Shadow Light LM Series
Stroke Counter (Electro-Mechanical)
Replacement Blades
Wired for CSA Canadian Electrical Standard
Increased Cutting Speeds (Please Call)
Please Contact Sierra Victor Industries at 386-304-3720 for a complete listing of optional equipment

*LM1010-2x: 121" x 10 gauge shear with 2x back gauge system
*LM1010-2xR: 121" x 10 ga Shear with 2x back gauge system & Performance Package-R
(Rear Return Sheet Support System)
*LM1010: 121" x 10 gauge shear

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 3 YEAR – Limited

Contact Seller

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida

Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Address (including City, State)*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored
Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details