BAILEIGH CNC Wood Routing Table WR-105V-ATC
CALL FOR AVAILABILITY AND BEST PRICING!
This CNC wood router table can automatically change tooling in just 8 seconds. You can program profile switches right into your design to save time and maintain precision during industrial production runs.
Large 5’ x 10’table.
Arrives pre-built with correct alignment. No complicated set-up process.
CNC wood router table comes with software for plotting out designs on your computer, then turning them into cut patterns for the machine.
Runs on 220-volt 3-phasepower.
Powerful 12hp spindle can tackle hard materials without flinching.
9 kilowatt air-cooled spindle will stay accurate through years of production.
Variable spindle speed, from 0 to 24,000 rpm.
Servo motors ensure smooth running at both fast and slow speeds.
High gantry is up and away from material, allowing you to see what it’s doing.
Y axis moves far enough for the gantry to clear the table. You can take the material directly off; no need slant it awkwardly.
Upload your design to the table with a USB drive. Automatic tooling changes let you swap out bits with computer-controlled precision. Sensor compensates for the change in tool lengths. That change might seem tiny, but it makes a huge difference to the finished product.
Pre-load up to 6 collets with your chosen profiles; the router will switch between them as programmed.
Powerful 7hp vacuum in the bed of the wood router machine holds the material in place during the cutting process.
4 vacuum zones allow you to turn on the valve only for the area where you’re working.
Arrange each zone’s vacuum seal into the shape of the material to provide well-distributed suction.
Dust shroud fits over the spindle; you can vacuum out all the dust and chips while you’re cutting.
Fully-welded steel frame keeps the machine stable, helping the router last longer and preventing vibrations from taking the cut off-course.
CNC wood router table covered by a 1-year parts warranty.
You can count on lifetime technical support by phone from Baileigh’s team of reps, all with hands-on product experience.
BobCAD-Cam Express Design Software (Included)
The WR-105V-ATC comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the table via a USB drive. Learn more and download a free trial.
Actual Working Area: 118" x 59"
Spindle: Air Cooled
Z Axis Stroke: 8"
Maximum Moving Speed (Inches Per Minute): 2362
Maximum Engraving Speed (Inches Per Minute): 984
Reposition Accuracy: 0.0015
Tool Diameters: er32
Power: 220V Three Phase
Table Style: Vacuum
Horse Power: 12
Weight: 3,200 lbs.
Notes: applicable Materials - Acrylic, Copper, Aluminum, Wood, PVC, ABS, Insulation Plate, Bakelite Plate, Honeycomb Plate, Resin, Organic Board, Aluminum Composite Panel
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida