NEW CLAUSING RADIAL DRILL
49" Arm, 25 x 20 x 16 Table, 2 3/8" Cap, 5.0 hp
Clausing Radial Drill Features and Standard Equipment:
- Equipped with independent clamping unit. Vertical movement of the arm is coordinated by an IC Timer. With a single touch on the push button switch, you can have arm unclamped on column and move vertically, or stop clamp automatically. Very easy to operate arm will maintain the same position after shifting.
- Gears are cooled and lubricated by an oil pump to minimize gear wear.
Friction type disc clutch absorbs impact force caused by vertical movement of spindle and protects all transmission units inside gear-box. With quick spindle return, the clutch will help speed-up the tapping operation.
- Special automatic tool eject device is supplied to allow you to change tools quickly. (No drift is required).
- Special arm elevating device prevents arm from dropping abruptly after years of usage.
- Coolant System
- Tool kit and manuals
- 25" x 20" x 15" Box Table
- Spindle Guard
Standard 230 volt 3ph other voltages may require a transformer or special order.
Clausing Radial Drill Specifications
Column Sleeve Dia. ( E ): 11.81"
Column Face to Spindle Center
Maximum (D+C): 49.21"
Minimum (D): 14.17"
Spindle Head Travel ©: 35.04"
Base Surface to Spindle End
Maximum (A): 52.95"
Minimum (B): 17: 36"
Arm Vertical Travel (A-B): 28.1"
Arm Rotation (Right & Left): 180 deg.
Baseplate Working Surface: 48" x 29.1"
Box Table Area
Length (L): 25.1"
Width (K): 20.4"
Height (H): 16.5"
Floor Area (R x S): 70.3" x 30.9"
Height (Q) : 7.8"
In Steel: 1.97"
In Cast Iron: 2.36"
In Steel: 1.57"
In Cast Iron: 1.97"
Spindle Stroke: 10.63"
Quill Diameter: 3.15"
Number of Spindle Speeds: 12
Spindle Speeds (rpm): 56-1450
Number of Feeds: 3
Spindle Feed Rate (in/rev.): .0023", .0004", .008"
Spindle Drive Motor: 5 hp (2sp)
Elevating Motor: 1 hp
Clamping Motor: 1 hp
Coolant Pump Motor: 1/8 hp
Overall Measurements & Weight
Maximum Machine Height (F): 104.1"
Base & Column Height (G): 81.9"
Shipping Dimensions (L x W x H): 81.1"x39.2"x88.2"
Net Weight: 5,071 lbs
Shipping Weight: 5,512 lbs
OPTIONAL EQUIPMENT (CALL FOR PRICING):
CLS100 Large Tilt Table 32 x 28 x 24
CLS101 Small Tilt Table, 20 x 20 x 23
CLS102 Extra Large Box Table, 39 x 31 x 19
CLS102B Extra Standard Box Table 25 x 20 x 16
CLS-SBM5 Spindle Braking Motor 10Hp (factory installed)
CLS-CE2 CE Electrics (factory installed)
CLS-CSA3 CSA\UL Electrics (factory installed) (non-certified)
CLS-200A Auto Reverse Tapping Feature 5MT (factory installed only)
Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
**Due to continual improvements, prices and specifications subject to change without notice**
FOR MORE INFORMATION: Call Terry at 973-497-7612