Photo shown is of Model #2060. Photo of Model #2080 not available at this time.
Swing Over Bed & Saddle
20"
Swing Over Cross Slide
12"
Distance Between Centers
80"
Speed Range
27 - 1600 RPM
Spindle Nose - Camlock
D1 - 8"
Feed & Thread Selections
66
Inch Feed Range
0.0015" - 0.105" /rev.
Inch Thread Range
2 to 127 TPI
Metric Feed Range
0.04mm - 2.67mm /rev.
Metric Thread Range
0.2mm to 14mm
Morse Taper with Tang
#5 MT
Carriage Length on Bed
21"
Carriage Bridge Width
10"
Direct Reading Dial Graduation
0.001"
Hand Wheel - 1 Revolution
1"
High Speed Threading
to 800 RPM
Repeatability of Auto Carriage Stop
+/- 0.005"
Feed Torque Control
Variable
Warranty
2 Year Limited Warranty
Voltage
208/230/460/575V ~ 3 Phase
Dimensions (L x W x H)
146" x 56" x 65"
D1-8" Camlock - 3 Bearing Spindle
18 Spindle Speeds 27 - 1600 RPM
Electric Brake - Self Actuating
All Hardened & Ground Gears - No Clutches
Direct Reading Speed Dial
Convenient Hi-Lo Neutral Shifter
Wrenches, Keys, Spare Shear Pins
Complete Range Of Inch-Metric Threads (Switchable)
Feed Reverse & Lead Screw Reverse
Full Length Rear Splash Guard
Bi-Direction Auto Carriage Stop (Feeds & Threads)
Hardened Quill With Tang Drive
Super Stiff Bed - Ready For Future Tools
Chip Clean Out - Front & Rear
Standard 115V Electric Controls