General:
Max. Distance Between Centers................................. 40"
Max. Swing Over Table......................................... 12.59"
Max. Diameter of Component to be Ground w/ Full Size Wheel.... 11"
Max. Load Held Between Centers................................ 330 Lb
Wheelhead:
Swiveling Angle............................................... 30-30 Deg.
Total Stroke.................................................. 6.3"
Handwheel Feed Stroke......................................... 3.7"
Automatic Rapid Feed Stroke................................... 1.6"
Automatic Intermittent Infeed Amount (Infinitely Variable).... 0.0001" - 0.0016"
Handlever Infeed Stroke, w/ Positive Stop..................... 0 - 0.0138"
Movement per Graduation of Handwheel.......................... 0.0001"
Movement per Turn of Handwheel................................ 0.04"
Grinding Wheel:
Diameter x Width x Hole....................................... 14" x 2" x 5"
Pulley Change / Wheel Speed................................... 2420 RPM
Table:
Swiveling Angle............................................... 12.5 Deg.
Traverse Speed (Infinitely Variable).......................... 2 - 157 IPM
Min. Automatic Reciprocating Stroke........................... 0.012" - 0.2"
Movement per Turn of Handwheel................................ 0.78"
Workhead:
Swiveling Angle (Counterclockwise - Clockwise)................ 90 - 30 Deg.
Center Taper.................................................. No 4 MT
Spindle Hole Diameter......................................... 0.78"
Spindle Speed (variable)...................................... 16 - 250 RPM
Footstock:
Center Taper.................................................. No. 4 MT
Max. Retracting Stroke of Center.............................. 25"
Cooler:
For Lubricating Oil, Wheel Spindle Bearings................... 1500 Kcal/hr
Electric Motor:
For Wheel Drive............................................... 5 7.5 HP 4P
For Work Drive................................................ 1 HP 4P
For Hydraulic Oil Pump Drive.................................. 2 HP 4P
For Lubricating Oil Pump Drive, Wheel Spindle Bearings........ 0.3 HP 2P
For Coolant Pump Drive........................................ 0.2 HP 2P
Reservoir Capacity:
Hydraulic and Lubricating Oil................................. 17.2 Gal.
Lubricating Oil, Wheel Spindle Bearings....................... 3.2 Gal.
Coolant Fluid................................................. 39.6 Gal.
Dimensions:
Approx. Weight................................................ 6820 Lbs
Approx. Floorspace Required (L x W x H)....................... 177" x 71" x 59"

Features & Equipment:

Swivel Table with dial indicator attachment
Automatic Pressure lubrication to handwheel and table slideways.
Automatic Filtered lubrications to the grinding wheel Spindle bearings.

huge compliment of grinding wheels
assorted centers.
drive dogs
misc.. tooling
Steady Rest
Coolant system
Hydraulic Tank

This machine is listed for sale by Wigglesworth Machinery, T.R. located in Bedford, Ohio