CALL 386-304-3720 FOR AVAILABILITY

FEATURES:
DNC Servo Hydraulic Press Brake Forming System, Manual Crowning System, CE Manual AKAS Safety, 8” Table, ESA 630 Control, 85ᵒ punch and die. Punch tip radius 0.8mm
FOB Warehouse
Frame is a robust, welded fabrication minimizing deflection and crowning issues
Extremely rigid upper beam for minimum deflection
Machine is flush floor mounted; no pit required
Multiple hard-chromed cylinder system
Built-in overload protection
Deep gaps inside frames for bending longer lengths with larger flanges
Quick approach and return speeds
The parallelism between moving upper beam and fixed lower beam during descent and ascent is ensured by two servo-valves electrically controlled by DNC (axes Y1 and Y2)
Two linear encoders located on each end of the upper beam make the measuring of the ram position. As the reference is always measured in relation to the bed, the ram position on bending depth is independent from the work length
Slow approach in manual mode for tool alignment
Upper moving beam guided at four points with adjustable gibbs made of self-lubricated material and with maintenance free bearings
Easy adjustment of the bending depth under load over the plate being bent, with programming in 0.0004" (0.01 mm) increments. The figure reached with the adjustment is easily entered into the computer tech
Adjustable stroke of hydraulic cylinders for maximum machine and tool flexibility
Choice of a narrow or wide bed bolted to the lower beam to allow flexibility with tooling
Fast cycle time/quick approach and return speeds
Hydraulic drive system, designed by Rexroth, complete with hydraulic fluid
Three modes of operation - Manual, Semi-automatic and Automatic
Ergonomically designed control panel for more convenient operator access
Motor and controls. Electrics for 3/60/220V Low voltage at the controls.
Emergency stop palm button on foot pedal assembly.
Key-lock switch for ON/OFF for the power supply and for selector of modes of operation.
Hydraulic fluid
One instruction manual, one programming manual, one operation and service manual

STANDARD EQUIPMENT:
ESA 630 Graphic CNC
Y1, Y2
Manual Crowing
Laser Guards
Full length precision ground punch and 4 way V die Segmented and 4 way / Single V Die holder 29” Backgauge, highspeed servo

OPTIONAL ITEMS:
On site training - $CALL

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida