NEW VICTOR MODEL: 618EVS SUPER PRECISION TOOLROOM LATHE
WITH SPECIAL PACKAGE
Special Package Includes:
6" Adjustable 3-Jaw chuck w/ back plate
Chip and coolant shield
(high impact resistance LEXAN polycarbonate resin)
STANDARD ACCESSORIES:
Variable frequency drive
5C lever type collet closer
Tool holder
Tailstock
Coolant system
Leveling screws and parts
Manual and part list
Features:
- Infinitely electronic variable spindle speed from 0-4,000 RPM
- Spindle runout within 50 millionths
- Dual range Inch/Metric quick change gearbox
- Electric variable feed control on carriage and cross slide
- Hardened and ground spindle mounted on high precision preloaded angular contact ball bearings
- Hardened and ground alloy bed ways
- Turcite-B slideway bearing surface between carriage and bed
- Automatic thread length control with fine adjustable
- stops to provide accurate threading
- Quick-action tool post slide for threading
- 5C lever type collet closer standard
- 3 HP main motor (Yaskawa Inverter Drive)
SPECIFICATIONS:
Spindle Capacity
with jaw chucks: 5"
with expanding collets: 3"
with round 5C collets: 1-1/16"
with hexagon 5C collets: 7/8"
with square 5C collets: 3/4"
with step chucks: 1-1/16" to 6"
Sindle nose diameter: 2.189"
Spindle nose I.D./O.d: 5C/ 4° taper
Hole through spindle: 1-1/4"
Variable spindle speeds: 0~4,000 rpm(5C collet) 0~3,000 (6" 3-jaw chuck)
Capacity
Swing over carriage: 9"
Distance between center: 18"
Swing over cross slide: 6"
Swing over bed: 11"
Threads, Feeds, & Travels:
Lead screw diameter: 1"-8 TPI
Carriage power feed range: 5/16" ~ 7"
Cross slide power feed range: 3/16" ~ 4"
Cross slide travel: 6"
Quick-action compound slide travel: 0.1"
Compound slide travel: 3"
Inch threads: 11~108 TPI (36 thread chages)
Metric threads: 0.275~2.7 mm (36 thread changes)
Tailstock
Tailstock spindle diameter: 1.358"
Tailstock spindle taper: M.T. #2
Tailstock spindle travel: 3-3/4"
Power
Inverter spindle motor: 3 HP 220V 3PH
Coolant pump: 1/8 HP
D.C. Feed motor: 110, 70W
Weight & Dimensions
Machine Dimensions (LxWxH): 73"x30"x67"
Gross weight: 2,530 lb.
*Design and specifications are subject to change without notice.
Optional Accessories:
Tool setting gage
5C collet fixture plate
Chip and coolant shield
Vertical cut-off slide
Steady rest
Follow rest
Face plate
Angle plate
Taper attachment
Radius turning attachment
6" zero set 3-jaw scroll chuck with 4 deg. Taper back plate
6" 4-jaw independent chuck with 4 deg taper back plate
Micro carriage stop with indicator
4-position indexable tool post
Rear tool holder slide assembly
Step chuck and closer
Threaded positive stops
Universal collet stop
5C collet set
Fixture plate
5C headstock center
Drive plate
Drive dog
Expanding collet and pads
Knurling holder
Turning & facing holder
Drilling & boring bar holder
6-Station turret
Bed length indicator
Live center
Quick change tool post
Digital Radout
FOR MORE INFORMATION: Call Terry at 973-497-7612