Swing over bed: 17"

Swing Over Cross Slide: 10.6"

Swing in Gap: 24"

Distance between centers: 43.5"

Width of bed: 11.75"

Width of gap in front of face plate: 5.9"

Height of center from leg bottom: 42.3"

Spindle bore: 2.25"

Taper of spindle bore & center: MT#6 x #4

Type of spindle nose: D1-6

Number of spindle speeds: 12

Spindle speed: 35~2,000 RPM

Number of feed changes: 16

Feeds per revolution - longitudinal: 0.0012"~0.039"

Feeds per revolution - Cross: 0.0004"~0.0117

Diameter and pitch of leadscrew: ø1.38”, 4 TPI

Range of inch threads: 2-72 TPI (44)

Range of metric pitches: 0.2 - 14mm (39)

Maximum travel of compound: 5.7"

Maximum travel of cross slide: 10.4"

Tailstock quill travel: 6.7"

Tailstock quill diameter: 2.3", M.T. #4

Main drive motor:7.5 HP

Coolant pump motor: 1/8 HP

Floor space: 98"x41"

Weight: 3,520 lbs.

 

• Main Motor: 7.5 HP, 230V / 460V, 3 Phase, 60

Cycle, Switch & Wiring

• 2.25" Spindle Bore

• Spindle Nose: D1-6

• 12 Spindle Speeds (35 – 2000 RPM)

• Timing Belt For Gear Changes

• Hardened & Ground Bed Ways And Cross Slide

• Automatic Longitudinal Feed Stop Bar

• 4-Way Tool Post Fitted to T-Slotted Compound

• Thread Chasing Dial

• 10” 3-Jaw Scroll Chuck

• Chuck Guard

• 8” Drive Plate & 14” Face Plate

• Headstock Spindle Center Adaptor: MT#6 to #4

• 4.7” Steady Rest With Roller Jaws

• Coolant System With Pump And Piping

• Full-Length Splash Guard

• Tool Box w/ Necessary Wrenches