NEW CLAUSING MODEL: CSG818ASDIII
AUTOMATIC PRECISION SURFACE GRINDER
Clausing EQUIPTOP Automatic Digital Touch Surface Grinders Features
On ASDIII models, you can set the vertical zero point, finish grinding volume, target point and the grinding wheel rise-up point
- The machine features a simple and clear digital display & touch control panel for easy learning and operation
- Vertical feed powered by dual motors, AC motor for rapid up/down and stepping motor for micro downfeed positioning, slow auto downfeed and slow up/down
- Vertical positioning is displayed on the screen showing present spindle and setting the start point, rough grinding volume, finish grinding volume, downfeed volume for finish grinding, target point, rise up point, intermittent spark-out
- Cross transverse travel powered by DC servo motor, allows step feed and continuous infeed grinding
- The speed of wheel dressing can be adjusted on the control panel
- High quality, ribbed, cast iron table, saddle and base
- All slideways and screws are fully oiled by an automatic continuous lubrication system to minimize wear on slideways and screws
- High Grade Anti-Wear Slideways…The saddle rides on precision, hand-scraped double V ways, and the table rides on precision hand-scraped V and flat ways coated with “TURCITE-B”
- Precision spindle cartridge, supported by preloaded precision angular contact ball bearings and one NN type roller bearing
Ballscrew for cross travel, powered by DC servo motor
ASD III Control Features
Delta PLC Digital Control features at 7.2” color touch screen and is equipped with the exclusive EQUIPTOP picture mode working system, easy to learn and operate.
- Frequency Inverter (Optional)
- 7.2” Touch Color Screen
- Chuck Control w/ De-Mag
- Grinder Condition Input
- Alarm Message
- System Data
- Starting Picture
- Machine I / 0 Monitoring
- Grinding Size Input
SPECIFICATIONS:
Table size: 8" x 18"
Max. Grinding length (longitudinal): 19"
Max. Grinding width (crosswise): 9"
Standard magnetic chuck size: 8" x 18"
Longitudinal movement of table
Max travel (hydraulic): 19"
Max travel (manual): 20"
Table speed infinitely variable: .196" - .984" min.
Crossfeed traverse travel
Auto traverse increment: .04"-.4"
Auto constant feeding speed: .79"-12.6"
Max. auto traverse travel: 9.25"
Max. manual traverse travel: 9.84"
Handwheel per revolution: 0.2"
Handweel per graduation: 0.0008"
Wheelhead vertical downfeed
Automatic infeed: .00005"-.0025"
Step feed (JOG): .00004"
Rapid travel, approx: 10"/min
Slow travel, approx: .236"/min
*Min. Display value: .00004"
Grinding spindle drive
Speed: 3450 rpm
Power rating: 2 HP
Standard grinding wheel
Diameter: 8"
Width: .5" max .75"
Bore: 1.25"
Hydraulic Motor, power rating: 1 Hp
Crossfeed Motor, power rating: 350W
Elevating Motor, power rating: 40W
Floor Space (total space required): 71" x 50.6" x 66"
Weight, net: 2,657 lbs. Gross: 3,031 lbs.
Rated Power, Approx: 3 HP
Packing Dimensions: 75" L x 56" W x 76" H
*ASDIII models have no elevating handwheel but JOG buttons per revolution or graduation.
Standard Accessories:
- Tool box with tools
- Wheel extraction screw and nut
- Balancing arbor
- Leveling screws with blocks
- Grinding wheel
- Wheel flange
- Work Light
- Touch-up paint
- Auto lubrication system
- Diamond dresser
- Manual Pulse Generator
- Chuck Controller w/De-Mag
- Standard voltage 230 or 460 3 Phase (208 requires a transformer or special order)
Chuck Options
C0105 8” x 18” Permanent Magnetic Chuck
C0105F 8” x 18” Permanent Magnetic Fine Pole Chuck
C0107 8” x 18” Electromagnetic Chuck
C0107F 8” x 18” Fine Pole Electro Chuck
C0107A 7.8” Adj. SP Rotary Mag. Chuck
Coolant Options
C0200 Coolant Paper Filter Roll 19.5”x19.25”x5um Sheets C0201 10.5gal 6.6gal/min Coolant & Dust Unit
C0201A 10.5gal 6.6gal/min Coolant & Dust Unit w/Mag.
C0202 10.5gal 6.6gal/min Coolant System
C0203 Dust Collector
C0204 31.7gal 6.6gal/min Coolant w/Man. Paper Feed
C0205 40.9gal 6.6gal/min Coolant w/Auto Paper Feed
C0206 40.9gal 6.6gal/min Coolant w/Auto Paper Feed&Mag.Sep.
C0207 18.5gal 6.6gal/min Coolant w/Mag. Sep.
Balancing Options
C0301 Extra Balancing Stand
C0301R Roller Balancing Stand
C0301A Arbor for Balancing Stand
C0310 Dynamic Wheel Balancer w/Special Wheel Flange
C0601 Spare Wheel Flange
Wheel Options
C0701 Manual Over the Wheel Dresser
C0801 Extra Dia. Dresser w/Diamond (table mount)
C1100 Extra 8” x .5” x 1.25” Grinding Wheel
C0502A Full Enclosed Guard w/Top Cover (Factory Installed only)
C0500 Door Interlock for Full Enclosed Guarding
C1603 Swivel Guard
C1604 Extra Dust Collector Guard
Feed Options
C1601 Mobil Manual Pulse Gen. w/Stepping Motor Control
(factory order)
Spindle Options
C4001 Inverter Control 0-3450 rpm 2HP 230v (factory installed)
C4001A Inverter Control 0-3450 rpm 2HP 460v (factory installed)
Options for 3Hp
GR-3HP 3Hp Spindle Motor in Lieu of 2Hp (factory order)
C4002 Inverter Control 0-3450 rpm 2HP 230v (factory installed)
C4002A Inverter Control 0-3450 rpm 2HP 460v (factory installed)
Warranty
Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.
Machine design, control and specifications are subject to change without notice.
FOR MORE INFORMATION: Call Terry at 973-497-7612