Sunnen Model CK-21-E Computerized Vertical Honing Machine, New 1999.
CK-21face="Roboto Condensed"> Vertical Honing Machine
"Sunnen Products CompanyThe Sunnen CK-21 makes bore sizing
and finishing faster, easier, more accurate, more economical
and more productive. It is the third generation of Sunnen
vertical honing machines, and the ultimately superior one.
The Sunnen CK-21 makes bore sizing and finishing faster,
easier, more accurate, more economical and more productive.
It is the third generation of Sunnen vertical honing machines,
and the ultimately superior one. The new design incorporates
a microprocessor-based control system, allowing for faster,
more accurate sizing and boring than less advanced mechanical
equipment.
The CK-21 puts you in complete control of all aspects of the
honingface="Roboto Condensed" size=6> cycle. You can adjust spindle speeds, stroke speeds,
feed rates, stone wear compensation, size control and bore
geometry at any point in the cycle. The CK-21 is economical
and easy to run. Even your newest operator can learn it in
a few hours. Setup is quick easy using the menu-driven
microprocessor system control. Stock removal is preset,
and the machine shuts off automatically when the honing
cycle is completed.
With the CK-21 in your shop, yourface="Roboto Condensed" size=6> bore-finishing work
goes fast, smooth and trouble-free ... time after time."
Key Features
- Fully computerized control face="Roboto Condensed" size=6>
- Two-stage honing cycle
- Precise geometry
- Fast stock removal
- Improved surface finish
- SizeLoc (locks in diameter for automatic bore-sizing)
SPECIFICATIONS:
Diameter range: 0.75" – 8.0"
Work area:57" x 35" x 32"
Max. workpiece weight: 1,500 lb.
Spindle speeds (in 2 ranges):90 – 240 & 170 – 550 rpm
Spindle stroke length: 0.75" – 12"
Spindle stroke rate:40 – 100 spm
Feed system rate (max.):0.030 ipm
Feed system operating torque (max.): 10 ft-lb
Honing fluid system capacity (max.): 63.5 gal.
Air requirement: 80 psi
Electrical requirements:3/60/460V/18.7 FLA
Control voltage:24VDC
Main motor:4Hp/3/60/230/460
Floor space (approx.):87"W x 86"D x 88"H
Weight (dry, approx.):3,000 lb.
EQUIPPED WITH:
Sunnen programmable control
Mandrels:
Sunnen 3H-P28-2375WG 8K Capacity to about 2.438 diameter
Sunnen 3H-P28-2000WF-9M Capacity to about 2.061 diameter
Mandrel adapter
Manual
** Located in our Harrison, NJ Warehouse **
** Excellent condition & appearance - Original paint **
FOR MORE INFORMATION: Call Andy at 973-497-7600