GIDDINGS & LEWIS "Winslowmatic" Drill Grinder
Model: HC S/N: 940-00660-92 New: 1992
Drill point type and capacities:
conventional point 1/16" to 1.5" diameter
helical point 1/16" to 1" diameter
racon point 1/16" to 1" diameter
split point 1/16" to 0.5" diameter
pyrcon (four facet) 1/16" to 1 diameter
Grinding wheel size 12" diameter x 5" bore x 0.75" face
Drill point included angles from 90° to 140°
Approximate weight: 1,200 lbs.
Equipped with Tooling Package:
(9) Drill Holders
Part No. 592 - 50003 - 00
0.62" - .125"
1.55 - 3.20mm
Part No. 592-50022-00
0.125" - .187"
3.2 - 4.8mm
Part No. 592-50023 - 00
0.187" - .250"
4.8 - 6.4mm
Part No. 592-50024-00
0.250" - .312"
6.4 - 8.00mm
Part No. 592-50025-00
0.312" - .375"
8.00 - 9.5mm
Part No. 592-50026-00
0.375" - .469"
9.5 - 11.9mm
Part No. 592-50027-00
0.469" - .562"
11.9 - 14.3mm
Part No. 592-50028-00
0.562" - .656"
14.3 - 16.7mm
Part No. 592-50028-00
0.656" - .750"
16.7 - 19.0mm
Bushing Index Plates, Inch & Metric
Part No. 526-54266.00 1/16" thru #25
Part No. 526-54267.00 #24 Drill thru #4 Drill
Part No. 526-54268.00 7/32" thru 19/64"
Part No. 526-54269.00 5/16" thru X Drill,
Part No. 526-54270.00 Y Drill thru 19/32"
Part No. 526-54271.00 39/64" thru 3/4"
Part No. 526-54272.00 1.55" thru 2.6mm
Part No. 526-54723.00 2.7 thru 4.5mm
Part No. 526-54274.00 4.6 thru 6.25mm
Part No. 526-54275.00 6.3 thru 8.0mm
Part No. 526-54276.00 8.1 thru 9.4mm
Part No. 526-54277.00 9.5 thru 14mm
Part No. 526-54278.00 14.5 thru 19mm
Capability to handle all types of 2-fluted, right hand drills
Lip clearance angle adjusted from the operator's control console
Point angle varied from by angular adjustment of workhead
Cam action-generated rotary motion in all three axes set at the operator's control console
Built-in cam-formed wheel dresser
Optional Bellows airfeed attachment
Cams for Dresser
Mist Collector
(3) Extra grinding wheels, Two with grinding wheel hubs
Work light
1/8 H.P. coolant pump motor
.25 H.P. workhead motor
1 H.P. grinding wheel drive motor and electrical controls
3/60/230 or 460 volt input, wired presently for 440 Volts
Special Note:
Parts & Service are available from:
Winslow Engineering
Fond du Lac, WI
(call for phone #)
(winsloweng.com)
** Exceptional Condition & Appearance - Original Paint **
** Inspect Under Power in our Harrison, NJ Warehouse **
FOR MORE INFORMATION: Call Andy at 973-497-7600