COLE-TUVE Angle and Shape Bending Roll PK35 |
|
Stock Code: |
PK35 |
Price: | $RFQ |
Subcategory: | Angle Bending Rolls |
Manufacturer: |
Cole-Tuve |
Model: |
PK35 |
Condition: | New |
CALL FOR 386-304-3720 AVAILABILITY
FEATURES:
The machine has the following features: Heavily proportioned steel welded frame for rigidity and stability... 2-roll direct gear drive with brake-motor...Dual rolling speed...Shafts and gears are hardened and ground and rotate on amply-sized bearings...Standard rolls handle many shapes...Can be used for rolling either horizontally or vertically...CE Certified.
Additionally, on this machine, cap rail can be rolled...various other materials can be rolled into spirals...can be twisted for pickets...and the machine can be equipped with an electronic digital readout for the positions of the adjustable roll... any or all with available options.
The machine is also available for operation on single phase (variable speed): $6,470.00
STANDARD EQUIPMENT:
Standard rolls for some of the shapes listed above; others require special rolls, details on request...2 - lateral guide rolls... Two rolling speeds... Electric motor with brake. Electrics for 3/60/220 or 3/60/440 operation. Low voltage at the controls. Emergency stop control. Movable foot control. (Portable push button control optional.)... Scale for positions of adjustable roll.
SPECIFICATIONS:
Angle iron, leg-out: 2" x 2" x 1/4"
Angle iron, leg-in: 2" x 2" x 3/16" (SP)
Flat bar on flat: 4" x 5/8"
Flat bar on edge: 2-3/8" x 3/8"
"T" iron, leg out or leg in: 2-3/8" x 1/4"
Square bar: 1-3/8"
Round bar: 1-3/8" (SP)
Channel iron, leg out and leg in: 3"
Pipe: 2" Schedule 40 (SP)
Round Tubing: 2-3/4" x 14 ga. (SP)
Cap Rail - up to and including: 2-1/2" (SP)
Square tubing: 2" x 2" x 10 ga.
Rectangular Tubing, hard way: 2-3/4" x 1-3/16" x 14 ga.
Diameter of the standard rolls: 6.10"
Diameter of the roll shafts: 1.97"
Hardened and ground shafts, diameter: 1.96", and hardened and ground gears
Rolling Speed: 7-1/2 and 15 FPM
Adjustment of upper roll: Manual
Motor: 2 HP
Working Plane: Horizontal / Vertical
Dimensions (Approx.): 30" x 44" x 56" Across, Front to back, Height includes top roll adjustment
Weight (approx.): 880 lbs.
*The shapes marked (SP) require optional special rolls. The other shapes can normally be rolled with the standards rolls supplied with the machine. For production runs of some of those shapes, optional special rolls may be desirable. Rolling angle leg-in requires optional leg-in guide rolls and may require special rolls.
OPTIONAL ITEMS:
Set Optional Rolls for 1-1/2" Schedule 40 pipe: $775
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida