NEW SHARP 21.65" COLUMN, 98.42" ARM, RADIAL DRILL
MODEL: RD-2500 **MADE IN TAIWAN**
FEATURES:
Hardened and Ground Arm slide ways, gears
Arm Elevation is controlled by Hydraulic Motor
Safety Device prevents arm from dropping even when copper nut is worn
Clutch device to protect spindle and spline from damage upon overloading
Power tool release (tool knockout) for easy tool change
Hydraulic preset for spindle speed change
Counter balanced spindle (with casting) increases durability
Spindle depth setting with automatic kick out
T-Slots and Drain Channels on table and base casting
Auto reverse tapping function
STANDARD EQUIPMENT:
Box Table
Coolant System
Worklight
Toolbox
Wired 220V or 440V. Please Specify
SPECIFICATION:
Diameter of column: 21.65"
Distance from column surface to spindle center, max.: 98.42"
Distance from column surface to spindle center, min.: 19.68"
Travel of spindle head: 78.74"
Distance from base surface to spindle end, max.: 78.74"
Distance from base surface to spindle end, min.: 21.65"
Elevating height of arm: 39.37"
Effective area of table: 39.37” x31.49” x22.04"
Dimensions of base: 138.58” x 55.12”x 12.60"
Taper hole in spindle: MT#6
Stoke of spindle: 17.72"
R.P.M. of spindle (rpm range x steps): 16-1250 x 16 Steps
Feed of spindle (rev.teps): 0.0016-0.126” x 16 Steps
Main motor (HP): 10 HP
Elevating motor (HP): 5 HP
Coolant Equipment (HP): ¼ HP
Machine height from floor (max): 157.09”
Base + column height: 151.57”
Net weight (approx) lbs: 24,200.Lbs.
Shipping weight (approx) lbs: 27,500.Lbs.
Shipping dimensions (LxWxH): 157.48 x 63” x 151.57”
Capacity Drilling Steel: 3.15”
Capacity Drilling Cast Iron: 3.94”
Capacity Tapping Steel: 2.56”
Capacity Tapping Cast Iron: 2.95”
Total Power Consumptions
220V: 18KVA/50 amps
440V: 18KVA/25 amps
OPTIONAL ACCESSORIES:
Tilting Table 32” x 28” x 24” RD1230-TILT
CSA parts upgrade and guarding
CSA compliance certificate by CSA Group in Los Angeles face="Times New Roman" size=4>
FOR MORE INFORMATION: Call Rob at 973-497-7570