DAEWOO PUMA MX-2500ST MULTI AXIS CNC TURNING CENTER
NEW: 2005
SPECIFICATIONS
CAPACITY:
Swing over bed 29.5"
Swing over carriage 23.6"
Maximum bar capacity 3”
Maximum turning diameter, main spindle 21.65"
Max. permissible weight (including chuck) chuck work/shaft work 485 / 1322 lbs.
Distance between spindle noses 52.9”
LEFT (MAIN) AND RIGHT SPINDLE:
Spindle speed 3,500 RPM
Spindle nose ASA-A2-8
Left spindle drawtube I.D. 3.03”
Right spindle drawtube I.D. 2.953”
Spindle bore diameter 3.38"
AC high torque spindle motor (30 min.) 35 HP
Maximum spindle torque 319 ft-lbs
LEFT (MAIN) AND RIGHT SPINDLE C-AXIS:
Minimum programmable angle (degrees) .001
Rapid traverse rate (RPM) 200
C-axis repeatability +/- .006 deg.
C-axis positioning accuracy .0167 deg.
MILLING SPINDLE
Spindle speed 10,000 RPM
Maximum spindle torque 44 ft-lbs
Motor power (30 min.) 20 HP
Tool index (2,3 or 4 insert multi-tools) 30 deg.
B-axis (tilt) coupling increment 7.5 deg.
B-axis travel 240 (+/- 120) deg.
B-axis minimum increment 0.001 deg
B-axis positioning accuracy 0.006 deg.
B-axis repeatability 0.002 deg.
BED, SADDLE, & CROSS SLIDE:
X1 axis travel 21.85”
X2 axis travel 7.48”
Z1 axis travel 43.1”
Z2 axis travel 40.9”
Angle of slant bed 45 degrees
X axis rapid traverse rate 945 IPM
Z axis rapid traverse rate 945 IPM
X axis ball screw diameter 1.42"
Z axis ball screw diameter 1.77”
Maximum X1 axis feed thrust 2,710 lbs.
Maximum Z axis feed thrust 3,980 lbs.
X axis repeatability + 0.00006
Z axis repeatability + 0.00008"
Y-AXIS:
Y-axis travel 6.3” (+/- 3.15)
Y-axis rapid traverse rate 630 IPM
Y-axis repeatability .00012”
ATC:
Tool holder type CAPTO-C6
Tool storage capacity Cam 40 (Opt. 80)
Max. tool diameter 3.54”
Max. tool diameter w/o adjacent tools 4.72”
Max. tool length 11.8”
Max. tool weight 17.6 lbs.
Tool selection method Fixed
Tool change time (tool to tool) 1.5
LOWER TURRET:
Number of tools 12
Tool holder type BMT 65P
Turning tool shank size 1.0"
Boring bar diameter 1.5"
Turret index time (next station swivel time) 0.2 sec.
Tool selection Bi-directional
Turret index repeatability + .0005 degree
ROTATING TOOLS LOWER TURRET:
Rotating tool RPM 4,000 RPM
Rotating tool spindle motor (15 min rating) 7.5 Hp
Rotating tool torque 34.7 ft-lbs.
Rotating tool collet type ER-32
Milling collet capacity .079” to .787"
COOLANT SYSTEM:
Milling spindle coolant pump pressure 145 PSI
Milling spindle coolant pump motor 3.0 HP
Lower turret coolant pump pressure 65 PSI
Lower turret coolant pump motor 1.2 HP
Coolant tank capacity (ST / LT and LST) 80 / 92 gallons
Approx. Net Weight 27,500 lbs
Equipped With:
- Fanuc 18iTB CNC CONTROL
- Toolsetter
- 10" Chucks for Left and Right Spindles
- 40 Tool ATC
- 12 Position Lower Turret w/Rotary Tool Capability
- Automated Part Unloading System
- Chip Conveyor
- Barfeed Interface
FOR MORE INFORMATION: Call Mike at 973-497-7540