OKUMA Intelligent Multitasking Model MULTUS B200II (W} with OSP-P300S CNC C |
|
Price: | $RFQ |
Subcategory: | CNC Turning Centers |
Year of Manufacture: |
2017 |
Manufacturer: |
Okuma |
Model: |
MULTUS B200II |
Condition: | Used |
OKUMA Intelligent Multitasking Model MULTUS B200II (W} with OSP-P300S CNC Controller (15 inch OSP suite) Including CE mark 2017
Standard Specification
Main spindle motor PREX 11/7.5kW (20 min./cent)
Main spindle speed, 50 .. 6,000 min-1, (Auto two-shift,PREX) Main spindle 140flat, bore dia. 62mm
C-axis control, 360 degree at 0.001degree increment
No chuck & no tube for Main-Spindle
Hollow cylinder SR1146 for main spindle, not incl. draw tube
Y-axis stroke 160mm (+80mm- -80mm)
H1 ATC turret HSK-A63
Max tool weight: 4kg Max tool length: 200mm (from gauge line)
20-tool ATC
Rotary tooldrive motor. VAC 12/8 kW ( 5 min./cont) Rotary tool spindle speed, 50- 12,000 min-1
Sub spindle motor PREX11/7.5KW(20min./cont.)
Sub spindle speed, 50- 6,000 min-1, (Auto two-shift, PREX) Sub spindle 140flat, bore dia. 62mm
No chuck & no tube for Sub-Spindle
Hollow cylinder SR1146 for sub spindle, not incl. draw tube
Chuck air blower for main + sub spindle
Hydraulic power unit
"Pre-arrangement for High pressure coolant unit 7MPa
UM through spindle coolant pressure high/low switchable function
(High/Low pressure pumps and filter unit will be arranged locally)"
Pump for Chip flusher and ExternalM-spindle coolant:0.8kW(MTH2-50/5)
+Pumping pump:0.88kW(MTH4-4013) Totally enclosed chip and coolant shield Door interlock
Work light, LED, left and right each
Foundation washers and leveling jack screws
Machine lifting hooks & hand tools
Chuck auto open I close with confirmation for main + sub spindle
M spindle through coolant supply spec. S-axis indexing, 0.001 degree indexing Lubrication monitor A-1+ Hydraulic original Chip pan
Application for IEC standard
Touch setter M
Double type chuck operation pedal
CE mark and EMC Dummy holder HSK-A63
OSP-P300S 3D-M-E kit specifications
*Workpiece coordinate system selection 10 sets
*Coordinate conversion
*Profile generation
*Coordinate computation (including NYCL command)
*Coordinate change: shift, rotate, copy
*Real 3D simulation
*Cycle time over check
*Load monitor (spindle, feed axis)
*NC operation monitor (incl. counter and totalization function) "Signal tower 2 colours
*Spindle speed modulation control
*Cycle time reduction function
*Hi-Cut Pro
Colour 15" touch display
Thermo-Friendly Concept (H1 TAS-S and TAS-C)
Collision Avoidance System
Toolcompensation* Implemented as "simple operations" functions
Workpiece jump out detection
Electrical Power Source Application to suite local power source at each countries
This machine is listed for sale by Industrial Machinery And Rigging
located in Livonia, Michigan