Haas VF3YT Vertical Machining Center (2018) |
|
Stock Code: |
104003 |
Price: | $RFQ |
Subcategory: | Vertical Machining Centers CNC |
Year of Manufacture: |
2018 |
Manufacturer: |
Haas |
Model: |
VF3YT |
Condition: | Used |
Specifications:
Travels
X Axis 40.0 in
Y Axis 26.0 in
Z Axis 25.0 in
Spindle Nose to Table (~ max) 29.2 in
Spindle Nose to Table (~ min) 4.2 in
Spindle
Max Rating 30.0 hp
Max Speed 8100 rpm
Max Torque 90 ft-lbf @ 2000 rpm
Max Torque w/opt Gearbox 250 ft-lbf @ 450 rpm
Drive System Inline Direct-Drive
Taper CT or BT 40
Bearing Lubrication Air / Oil Injection Cooling
Liquid Cooled
Table
Length 54.0 in
Width 24.0 in
T-Slot Width 0.630 in
T-Slot Center Distance 3.15 in
Number of Std T-Slots 7
Max Weight on Table (evenly distributed) 3500 lb
Feedrates
Max Cutting 500 ipm
Rapids on X 710 ipm
Rapids on Y 710 ipm
Rapids on Z 710 ipm
Axis Motors
Max Thrust X 2550 lbf
Max Thrust Y 4100 lbf
Max Thrust Z 4100 lbf
Tool Changer
Type Carousel Capacity 20
Max Tool Diameter (full) 3.5 in
Max Tool Weight 12 lb
Tool-to-Tool (avg) 4.2 s
Chip-to-Chip (avg) 4.5 s
Coolant Capacity 55 gal
Air Requirements
Air Required 4 scfm @ 100 psi
Inline Air Hose 3/8 in
Coupler (Air) 3/8 in
Air Pressure Min 80 psi
Electrical Specification
Spindle Speed 8100 rpm
Drive System Inline Direct-Drive
Spindle Power 30.0 hp
Input AC Voltage (3 Phase) - Low 220 VAC
Full Load Amps (3 Phase) - Low 70 A
Input AC Voltage (3 Phase) - High 440 VAC
Full Load Amps (3 Phase) - High 35 A
Equipped With:
Probing System
Chip Auger
Carousel Tool Changer
8,100 RPM Direct Drive
Cat 40
This machine is listed for sale by
located in Milford, Michigan