JMT PBH100 HYD PYRAMID STYLE ANGLE ROLL, 4" X 4" X 1/2", 20 |
|
Stock Code: |
10559 |
Price: | $RFQ |
Subcategory: | Angle Bending Rolls |
Length: | 4" |
Width: | 4" |
Year of Manufacture: |
2012 |
Manufacturer: |
Jmt |
Model: |
PBH 100 |
Condition: | Used |
USED JMT PBH 100 HYDRAULIC PYRAMID STYLE ANGLE ROLL, 4" X 4" X 1/2", 2012, Stock No. 10559
Specification:
Angle leg out: 4" x 4" x 1/2" to a 56" dia.
Angle leg in: 4" x 4" x 1/2" to a 63" dia.
Solid square: 2-1/4" x 2-1/4" to a 57" diameter 1-1/8" x 1-1/8" to a 15" dia.
Square tube: 3-1/4" x 3-1/4" x 3/16"
Flat along edge: 4" x 1" to a 60" dia. 1-1/2" x 3/4" to a 15" dia.
Flat the easy way: 7" x 1-3/8" to a 16" dia. 2-3/8" x 3/8" to a 35" dia
T-section leg down: 4" x 3/8" to a 47" dia.
T-section leg out: 4" x 3/8" to a 39" dia.
T-section leg in: 4" x 3/8" to a 51" dia.
Rectangular tube: 4" x 2" x 3/16"
Round solid: 2-3/4" to a 31" dia. 1-3/16" to a 16" dia.
Schedule 40 pipe: 4" to a 63" dia. 1" to a 18" dia.
Round tube: 4-1/2" to a 55" dia. 1" x .062" to a 16" dia.
C-section leg out: C6 x 13# to a 31" dia.
C-section leg in: C6 x 13# to a 39" dia.
Shaft diameters: 4.3" - 3.9"
Roll diameters: 12.4"
Motor power: 15 H.P.
Voltage: 220 / 440 volt 3 phase currently wired 440 volt 3 phase
Turning speed: 26.2 FPM
Dimensions: 53" x 69" x 65"
Weight: 7,408 lbs.
Features:
Three driven rolls by planetary gearbox
Horizontal or vertical operation
Equipped with:
Universal roll set
Hardened rolls
Portable pedestal control on wheels with 2 programmable digital readouts for roll position
Guide rolls powered for in and out adjustment, manual for up / down and tilt
This machine is listed for sale by Westbrook Engineering
located in Warren, Michigan