NEW 5.5″ x .187″ SFM HF Tube Mill Line |
|
Stock Code: |
3613 |
Price: | $RFQ |
Subcategory: | Tube Mills |
Maximum diameter: | 5.5" |
Maximum thickness: | 0.187" |
Year of Manufacture: |
2018 |
Manufacturer: |
Sfm |
Condition: | New |
Stock #3613
Delivery: 2-1/2 Months from Receipt of Order
Direction: R-L
Tube OD: 2"-5.5″
Wall Thickness: 0.06″-.187″
Mill Max Speed: 260 FPM
Strip Thickness: 0.059″-0.187″
Single Point Adjustment
Voltage: 480V/60Hz/3Ph
Welding Speed: 65–196 FPM
SFM FORMING MILL:
Leveler (5-Roll Driven, 2 Upper & 3 Lower)
Guiding Roll
7 Horizontal Forming Stands: Roll Shaft Dia.: 3.93″
9 Vertical Roll Stands:Roll Shaft Dia.: 2.36″
Drive
Drive Motor: DC132KW
WELDING SECTION:
Idle 2-Roll Weld Seam Guide-Roll Table
3-Roll Squeeze Roll
Outside Weld Scarfing Device
Idle 2-Roll Iron Roll
Cooling Device, 20′ Length
SFM SIZING MILL:
5 Horizontal Stands
5 Vertical Stands
2 4-Roll Rough Straightening Machines
Driving Device
CUT-OFF: UCG #U-TRAK S3 High Speed Flying Cold Saw
DRIVE SECTION: 2 DC Motors: 177HP/132KW
NOTE: Proposal does not include rollers, welders and DC motor convertor. Start-up will be billed at standard T&M rates.
This machine is listed for sale by Universal Tube & Rollform
located in Perrysburg, Ohio