MYFORD PLAIN CYLINDRICAL GRINDER |
|
Stock Code: |
18021 |
Price: | $5,950 |
Subcategory: | Cylindrical Grinders - Plain |
Manufacturer: |
Myford |
Model: |
MG12 |
Condition: | Used |
5" x 12" MYFORD PLAIN CYLINDRICAL GRINDER
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $5,950.00
Stock No. 18021
Machine Serial No. SM155398M
Machine Model No. MG12
New Date: Late 1983
Maximum Grinding Diameter: 3"
Swing Over Table: 5"
Maximum Table Travel: 13-3/4"
Capacity Between Centers: 12"
Table Swivels Either Way: 10 Degrees
Table Traverse: Via Manual Hand Crank Only – No Power Traverse
Tailstock Taper: #2 Morse
WHEELHEAD:
Hydraulic Advance & Rapid Retraction
In-Feed Hand Wheel Graduations: 0.00005" Per
Table Traverse Hand Wheel Graduations: 0.0002" Per
Main Wheel Speeds: 1830 and 1988 RPM
Grinding Wheel Size: 12" x 1-1/2" x 5" Bore
WORKHEAD:
Variable Workhead Speeds: 50 to 900 RPM
Workhead Taper: Myford
EQUIPPED WITH:
Swiveling Work Table for Grinding Tapers
Motorized Workhead – NON Swiveling
Motorized Workhead has Live/Dead Spindle
Workhead Collet Draw Tubes, Manual and Lever Type
(10) Assorted Collets
(1) 3-1/4" Diameter 3-Jaw Chuck
(1) 3-1/4" Diameter 40Jaw Chuck
Additional OD and ID Chuck Jaws
(1) 5" Diameter Face Plate
(1) Workhead Adapter for #2 Morse Taper
(1) Table Mounted Wheel Dresser with Diamond
(1) Tailstock Mounted Wheel Dresser with Diamond
(1) Wheel Mounting Hub
(1) Table Mounted Manual Parts Spinning Fixture
Swing Down Internal Grinding Spindle
(4) Assorted Length ID Spindles
Automatic Way Lubrication System
Quick Acting Lever Type Tailstock Quill
Separate Coolant Tank and Pump
Work Area Splash Guard
(2) Micrometer Adjustable Table Stops
1-1/2 HP Wheelhead Drive Motor
Multi Tap Input Voltage Transformer for 220-380-440 Volt Input
Presently Wired for 3 Phase, 60 Hz, 440 Volts
Overall Size:
Machine: 48" L-R x 41" F-B x 64" High on 3-1/2" Blocks x 3,000 Lbs.
Coolant Tank: 27" x 23" x 20" High
This machine is listed for sale by Hildebrand Machinery Co Inc
located in York, Pennsylvania