HEM DOUBLE COLUMN HORIZONTAL BAND SAW |
|
Stock Code: |
17218 |
Price: | $39,500 |
Subcategory: | Bandsaws Horizontal - Metal |
Manufacturer: |
Hem |
Model: |
H130HA-DC |
Condition: | Used |
HEM DOUBLE COLUMN HORIZONTAL BAND SAW
PRICE: Loaded on Truck, Our Warehouse, York, PA …..............… $39,500.00
PRICE: Loaded on Truck, Our Warehouse, York, PA (Saw Only) ... $32,500.00
HMC Stock No. 17218
Machine Serial No. 462295
Machine Model No. H130HA-DC
New Date: 1995
Sawing Capacity: 20" x 20"
Blade Size: 1-1/2" x 19' x .050"
10 HP Blade Drive Motor, Wired 3 Phase, 60 Cycle
New Yaskawa AC Variable Frequency Drive, Model A1000 Installed New 5/2018 That Replaces the Old Variable Speed Shives
2 HP Hydraulic Pump Motor, Wired 3 Phase, 60 Cycle
Blade Speeds: 72 to 400 SFPM via Variable Frequency Controller with LED Blade Speed Readout
Blade Feed Rate: 0 to 3" per Second
Carbide Blade Guides
Adjustable Cutting Pressure
Variable Vise Pressure: 0 to 800 Lbs.
Blade Brake Switch for Auto Shut Down if Blade Breaks Out of Stock Switch
Saw Shuts Off when the Feed Vise Runs Out of Material
Power Blade Tension
Power Guide Arms
Blade Chip Brush
Auto Bar Feed with Up to 24" Feed Stroke
Multi Stroking bar Feed Feature
Cut Watcher System:
A System that Monitors the Cut for Squareness to a Pre-Set Deviation Value. The System Shuts Down the Saw when the Pre Set Value is Exceeded.
Computer Controlled Feed System:
Programmable Feed to Automatically Cut 99 Different Jobs of Various Lengths from the Same Bar. Keyboard Entry of Job Number, Number of Parts to 999 Pieces per Job, Parts Length to 999.999" with Automatic Blade Kerf Compensation when Indexing Choice of Display to Indicate Number of Pieces Cut or Times per Part, Off-Set Feature to Correct Length as Blade Drills, HE&M Saw Designed Computer Using Intel 8031 Processor.
Material Jogging Feature Permits Incremental Control of the Shuttle Vise to Aid in Positioning the Material for Premarked Cuts. Third Holding Vise Assures Positive Alignment of Material.
Chip Auger
Coolant System: Coolant is Dispensed through both Guide Arms
Auto Bar Feed with (2) Vises & (7) Power Feed Rollers 3-1/2" Dia. x 24" L on 12" Centers
Exit Conveyor: 69" L with (11) 3-1/2" Dia. Rollers 22" L on 6" Centers with 4" W x 22" L Filler Plates Between the Rollers
Saw Overall Dimensions with the Bar Feeder & Exit Conveyor in Place: 24' L x 88" W x 89" H
Saw Only Dimensions: 135" L x 88" W x 89" H
Infeed Conveyor with Vises: 146" L x 81" W x 41" H
Exit Conveyor: 69" L x 32" W x 33" H
Material Loading System:
Overall Size: 15' L x 94" W x 3' H Consisting of (15) 3-1/2" Dia. Rollers 24" L on 12" Centers
All Rollers are Power Driven
4-Position Side Chain Conveyor to Load Roller Conveyors
Side Chain Conveyor Driven by a 1 HP Single Phase Motor into a Perfection Gear Reducer, Chain Driven
(5) Side Mounted Lift Arms that Raise & Lower via 12" Dia. Air Lift Pads
24" Center to Center on Lift Arms
Lift Arms are 81" L x 18" W x 36" H
This machine is listed for sale by Hildebrand Machinery Co Inc
located in York, Pennsylvania