IRM 9' Quick Quench Strip Annealing Furnace - Recoiler and Dissociater |
|
Price: | $RFQ |
Subcategory: | Furnaces - Annealing Strip |
Manufacturer: |
Irm |
Condition: | Used |
The furnace is an electrically heated, continuous strip-annealing unit with an angular hearth and water quench tank. Includes a recoiler and a built in dissociator.
Width of Combination Unit: 36” Wide
Length of Unit: Approx. 22’ including Quench Tank
Height of Unit: 48” High
Single Muffle Design Specifications:
• ¼” thick Enkonel diamond shape muffle.
• Work space 9” wide by 3” high at the muffle center.
• Muffle is of all Tig welded design and extends through the furnace entrance.
• Sealed atmosphere box.
• Extends through the furnace exit and enters the water quench tank.
• Graphite liner to prevent scratching during annealing.
Heat Zone Dimensions: 8” Wide x 3” High x 108” Long
Kilowatt Rating of Furnace: 220V; 3-Phase; 60 Hz; 80 Line Amps +/-20%
Furnace Direction: Material feeds left and exits right.
Temperature Control: There are two Watlow Series 965 1/16 Din Microprocessor based auto-tuning controls. This divides the heat zone into two zones. Each zone are monitored for oven temperature by two Series 365 1/16 Din temperature limit controls. All controls are calibrated for type (K) thermocouples.
Cooling Quench Tank: Made of stainless steel material. There is a 4” diameter polymer drum for guiding the strip stock through the water tank.
Panel Board: Equipped with all necessary switches and controls for efficient operation.
Drive System: The drive system consists of a pair of rubber pinch rolls with soft rubber, geared for speeds up to 144 inches per minute. There is a “V” groove bearing assembly adjustable to 8” wide to guide strip into the pinch rolls.
Recoiler Specifications: Equipped with a 12” Diameter x 9” Wide collapsible drum.
This machine is listed for sale by International Rolling Mills
located in Pawtucket, Rhode Island