5/8" x 20" Toko TL-400 Xtra-Long Dbl Stroke Open Die Cold Header |
|
Stock Code: |
23864 |
Price: | $RFQ |
Subcategory: | Headers - Rod |
Year of Manufacture: |
1990 |
Manufacturer: |
Toko |
Model: |
TL-400 |
Condition: | Used |
s/n: TB-121 • Built 1990 • Toko Engineering Works, Japan
Note: We are currently having this machine rebuilt – see below list.
Production per minute 32
Cutoff diameter rating 16.0 mm 0.629"
Maximum cutoff length 550.0 mm 21.653"
Maximum underhead length 500.0 mm 19.685"
Minimum underhead length 150.0 mm 5.905"
Quill diameter 45.0 mm 1.771"
Punch distance at center 85.0 mm 3.346"
#1 Punch diameter 70.7 mm 2.785"
#2 Punch diameter 76.0 mm 2.990"
Die block length 150.0 mm 5.905"
Ram stroke 375.0 mm 14.764"
Feed roll dimensions:
Diameter 406.4 mm 16.000"
Thickness 76.2 mm 3.000"
Main motor 30.0 kW 40.0 hp
Net weight 15,000.0 kgs 33,000.0 lbs
Dimensions:
Length 3,600.0 mm 141.7"
Width 3,000.0 mm 118.0"
Height 1,800.0 mm 71.0"
Complete with:
• Multiple roll two-plane straightener (floor mounted)
• Enclosed bushing type cutoff
• Unique TOKO Open Die System
NOTE: Dies only a few inches long produce parts the full length range of the machine's capacity.
• Quick Length Adjustment Feature
NOTE: Length changes can be made by making a simple adjustment and, when using the same diameter wire, the same set of dies will produce parts the full length range of the machine's capacity.
• Automatic lubrication system
• Variable speed drive
• Flywheel guards
• Oil catch base under entire machine
• Dual-grooved feed rolls
The rebuild work being performed is as follows:
1. Refitting the ram
2. Refitting the punch slide
3. Checking main journals
4. Refitting of the connecting rod to the crankshaft
5. Refitting of the connecting rod to the ram
6. Reworking the cams and cam followers
7. Reworking of the feed mechanism and components
8. Installation of a complete “new’ lubrication system
9. Replacing all lubrications lines, fittings, terminal distribution blocks, flexible lines, etc.
10. Checking and making any necessary repairs to the electrical system and operators control station
In addition, a number of parts were made brand new including one cross shaft, one side shaft, various shifter parts and other miscellaneous parts.
Location: Cleveland, Ohio Rebuilding Facility
This machine is listed for sale by TrueForge Global Machinery Corp.
located in Rockville Centre, New York