37" x 59" - 236" SHARP® CNC Big Bore Lathe |
|
Stock Code: |
STA-38 |
Price: | $RFQ |
Subcategory: | CNC Flatbed Lathes |
Manufacturer: |
Sharp |
Model: |
STA-38 |
Condition: | New |
CALL FOR AVAILABILITY AND BEST PRICING!
FEATURES:
This is a high precision CNC flat bed lathe with FANUC Oi-TD control. The STA series is available with option of 6", 9", 12" or 15" spindle bore, 37.38" swing over bed and 59" to 236"; distance between centers. The bed width is 24" and the spindle motor is available up to 60 HP.
The CNC Big Bore Lathes feature a unique design of one piece casting base that allows heavy cutting with high precision. The hardened and ground bedways are made from high quality Meehanite castings with internal ribbings for vibration dampening, heat distortion prevention and long lasting stability. There are 4 levels of geared spindle speeds to deliver full torque under various speeds. Change of each level is commanded by M code, operated hydraulically. Bedways and ballscrews are centrally lubricated with low level alarm. Headstock is equipped with heat exchanger to disperse heat and maintain spindle accuracy. Full length chip conveyor and enclosed splash guard are all standard accessories.
This is a heavy duty precision CNC lathe that can function at full horsepower during low and high speeds.
The large spindle bore and wide bedways are ideal for big parts and large mold work pieces.
This machine is available with option of 6", 9", 12" or 15" spindle bore, 37.7" swing over bed and 59" to 236" distance between centers.
The hardend and ground bedways are made from high quality Meehanite castings.
The spindle drive has 4 steps to deliver full power at all speeds.
The bedways and ballscrews are centrally lubricated with low level alarm.
The headstock is equipped with a heat exchanger to disperse heat and maintain spindle accuracy.
A full length chip conveyer and enclosed splash guard are all standard accessories.
STANDARD EQUIPMENT:
FANUC Oi-TD Controller
Spindle 4-steps speed auto. change
XZ-axes auto. lubrication system
XZ-axes with Turcite-B
XZ-axes C3 ball screw
Rear chain type chip conveyor
Manual tailstock MT#6
Steady rest 16"
Coolant system
Full enclosed splash guard
Heat exchanger
Dead center (2 piece set)
Tools & tool box
Operational manual
Packing pallet
Tailstock interference protection
Electronic hand wheel (MPG, Manual Pulse Generator)
Alarm lamp for working & cutting finish
Work lamp
Level pads
RS-232 interface
SPECIFICATIONS:
CAPACITY
Max Swing Over Bed: 37.4" (950)
Swing Over Cross Slide: 23.6" (600)
Distance Between Centers
59" (1500), 78.7" (2000), 118.1" (3000), 157.5" (4000), 196.8" (5000), 236.2" (6000)
BED
Width of Bed: 24"
Length of Bed
133.86" (3400), 153.54" (3900), 192.91" (4900), 232.28" (5900), 271.65" (6900), 311" (7900)
Bed Way: 2 V, 2 Flat Ways
HEADSTOCK
Spindle Bore: 6" (Opt: 9", 12", 15")
Spindle Nose: A2-11 (Opt: A2-15, A2-20)
Spindle Speed: 6-500 rpm (Opt: 9", 12", 15", 350 rpm, Varies with HP/chuck size)
No. of Spindle Speeds: 4 steps/Hydraulic
Spindle Taper: MT 6
TRAVEL
X-Axis Travel: Hydraulic Turret: 23.62", H4-600mm
Z-Axis Travel:
59" (1500), 78.74" (2000), 118.11" (3000), 157.48" (4000), 196.85" (5000), 236.22 (6000)
Diameter of X-Axis Ball Screw: 32 mm
Diameter of Z-Axis Ball Screw: 63 mm
FEED
X,Z-axis rapid: 196.85"/min (5000 mm/min)
X,Z-axis feed rate: 118.11"/min (3000 mm/min)
OP-TURRET
Turret Type
OP: Hydraulic Turret 4 tools (H4), 8 tools (V8), 12 tools (V12), VDI (coolant access)
Tool Shank/Numbers: 1.23" x 1.23" (32 x 32), Opt: 1.57" x 1.57"
Tool Holder Bore Diameter: 1.97"
TAILSTOCK
Quill Diameter: 4.92" (125)
Quill Travel: 11.8" (300)
Quill Taper: MT6
Body Movement: Carried By Saddle
Body Lock-Type: Manual (OP: Hydraulic Type)
Quill Movement: Manual (OP: Hydraulic Type)
MOTOR
Spindle MotorL 30 HP ( std, Fanuc Alpha 22), Opt: 40HP or 60 HP
X-axis Servo Motor: 4 HP (Fanuc AC servo)
Y-axis Servo Motor: 5.5 HP (Fanuc AC servo)
Hydraulic Pump: 2 HP (1.5 kw)
Coolant Pump: 1.7 HP (1.275 kw)
CONTROL
Control
Fanuc Oi-TD
OPTIONAL ITEMS:
Transformer 55KVA
Transformer 60KVA
3-jaw scroll strong chuck (direct mounted) A2-11-20" (500mm)
3-jaw scroll strong chuck (direct mounted) A2-11/15-25" (630mm)
Hydraulic 3-jaw wedge type through-hole power chuck 18"
Hydraulic 3-jaw wedge non through-hole power chuck 18"
4-jaw independent chuck 32" (810mm, A2-11)
4-jaw independent chuck 40" (1000mm, A2-11)
4-jaw independent chuck 50" (1250mm, A2-11)
Face plate with 4-jaw, A2-11-32"
Face plate with 4-jaw, A2-11-40" (grip range 150-900mm)
CALL FOR COMPLETE LIST
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida