C&M TOPLINE® Tumbler Media |
|
Stock Code: |
MEDIA |
Price: | $RFQ |
Subcategory: | Chamfering & Deburring Tools |
Manufacturer: |
C-M-Topline |
Model: |
MEDIA |
Condition: | New |
CALL FOR AVAILABILITY AND BEST PRICING!
FEATURES:
Media Formulations: Ceramic Tumbler Media for Steel and Stainless Steel
(P) polishing - This is a porcelain media that has no abrasive in it. It is used to polish all materials. It can be used as a second step or used alone when only a polish is required.
(M) general purpose - This is a general purpose media that will give moderate burr removal on hard metals with very good media life. It may also be used on some aluminum alloys.
(SF) super fast, good cutting and good life - This is a more aggressive media that will give good burr removal and good media life. It is used on all steels. This is our most widely used formulation.
(DF) dense fast-cut - This is a very aggressive media that will have a high wear rate. It is used when aggressive burr removal is required because of material hardness , burr size or a desire to reduce run times.
Media Formulations: Plastic Tumbler Media for Aluminum and Soft Metals
(V) pre plate finish - This media is used where you need very light de burring and is used in the jewelry industry. It can also be used as a second step for parts that have already been de burred and you want a smoother finish for polishing.
(X) general purpose - This is an excellent general purpose media for most aluminum alloys especially 6061-T6. It will produce fast burr removal, yet has good media life.
(XV) higher wear - This media is very similar to the X , but is slightly more aggressive and will have a slightly higher wear rate.
(Z-1) aggressive - This is a aggressive plastic media that will cut the harder aluminum alloys like 7075. It has a higher wear rate than the X , but will also give good burr removal and shorter run timed.
MADE IN THE USA
SPECIFICATIONS:
CERAMIC MEDIA*
22 Degree Angle Cut Tri-Stars (ACTS)
5/8" x 3/8": SF, M
7/8" x 3/8": SF, DF
1-1/8" x 3/8": SF, DF
22 Degree Angle Cut Triangles (ACT)
3/8"x 3/8": SF, M
1/4" x 3/16": SF
Angle Cut Cylinders (ACC)
5/8" x 1-1/8": M 45°
3/16" x 3/8": P, SF 22°
Cylindrical Wedge
1" x 1": SF, DF
PLASTIC MEDIA*
Wedge
1" x 3/4": X
1-1/2" x 1": X
Triangles
5/8" x 1/2" x 3/8": X
Cones
1/2" x 9/16": X
3/8" x 3/8": X
Pyramids
1/4" x 1/4" x 1/4": X
PORCELAIN**
Sphere: 3, 4, 5, 6mm
CORN COB
Corn Cob
*Packaged in 50 pounds.
** Packaged in 55 pounds.
OPTIONAL ITEMS:
CALL 386-304-3720 for more informaion and items not listed
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida