CALL FOR BEST PRICE!

FEATURES:
12” x 58” table, 16” x 40” travel, 5 HP, #40, vari speed, box ways
SHARP milling machines are constructed from certified MEEHANITE castings that provides high rigidity and excellent vibration dampening characteristics. The models are equipped with hard chromed dovetail ways or hardened and ground box ways for superior wear resistance . For almost 30 years, the SHARP mills have been one of the most reliable mills in the industry.

HEAD:
The 5 HP motor is equipped with Digital Variable Speed drive that allows the change of spindle speed by simply turning a knob.
The motor shaft and Vari Drive pulleys are dynamically balanced, then hard-chromed this allow a vibration free milling even at high speed.
An oversized 4-1/8” diameter quill is used for heavy duty milling along with the #40 taper spindle.
A matched pair of super-precision ABEC-7 angular contact bearings supports the spindle. The quill is CNC-ground to a mirror finish, and then chromed to fit the housing. Together, they insure spindle run out of no more than 0.00002” TIR
Beside swiveling 90 degree side to side, the head can also swivel up and down by virtue of a knuckle joint design. The new design developed by Sharp uses 6 bolts, 3 each side, that fitted into a circular T-slot milled at the inside of the over arm and secured by nuts from the outside. It secured the head tightly and offered high accuracy in milling operations.
Column, Table and Knee:
Hardened and ground box ways on column and saddle are used for extra rigidity.
Power Feed Table and Saddle are installed standard
Certified MEEHANITE castings with high tensile strength are fully ribbed for better dampening of vibrations.
Manual movement of the table is controlled by a hand wheel installed at the front of the table for easy operation.
Table and saddle backlash is controlled by a double-nut design that keeps the feed screw in contact with a pair of bronze nut at all times. A unique SHARP feature.
"Bridgeport-style" vertical knee mill
The saddle is built with extra width to fully support the entire travel of the table.
Knee elevation is powered by a single 1-1/2 HP motor for rapid positioning of heavy work piece.
Table and saddle movement is powered by individual control with rapid traverse function.

STANDARD EQUIPMENT:
Hardened and ground box ways
Power feed table and saddle
Knee elevation system
Coolant system
Draw bar
Front and rear rubber way cover
One-shot lube system
Tool Kit
Wired 220V or 440V (440V requires additional Transformer)

SPECIFICATIONS:
TABLE
Working surface: 12" x 58"
T-slot number, size: 3 x 5/8" x 2-1/2”

CAPACITY
Table travel; x-axis: 40"
Saddle travel; y-axis: 16"
Ram travel: 17-3/4"
Quill travel (Z-axis): 5"
Knee travel: 16"
Spindle gage line to table top: 2-18"

SPINDLE
Motor: (220/3/60) 5 HP
Wiring voltage: 220V / 440V, 3 Ph, 60 Hz
Taper: NST #40
Speed (Digital Vari-Speed): 70-4,000 RPM
Quill feed (IPR): 0.0015”, 0.003”, and 0.006"
Accuracy: 0.0002" TIR
Head tilt; right-to-left (each way): 90°
Head tilt up-and-down (each way): 45°

DIMENSIONS & WEIGHT
Floor area (w x d): 83” x 75”
Height: 100"
Approx. Net weight: 4,500 lbs.

OPTIONAL ITEMS:
Digital Readout systems
Power drawbar
Riser block (6”)
Halogen work light
Drill chuck with arbor R-40
Milling vise

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida