buy & sell, new & used machinery, machine tools & equipment

 
Machine Tools > Lathes & Turning Centers > Precision Lathes    < Back

SHARP 1600L-Series High Speed Precision Lathes - $RFQ

Item Number: #00082769
SHARP 1600L-Series High Speed Precision Lathes

SHARP 1600L-Series High Speed Precision Lathes
Stock Code:  1640L
Price: $RFQ
Subcategory: 

Precision Lathes

Swing16"
Centers40"
Manufacturer:  Sharp
Model:  1640L
Condition: New

CALL 386-304-3720 FOR AVAILABILITY

AVAILABLE MODELS: 1640L, 1660L
16" x 40", geared head, D1-8 camlock, 3.18" bore, 7.5 HP, 20-2,000 rpm (12)
16" x 60", geared head, D1-8 camlock, 3.18" bore, 7.5 HP, 20-2,000 rpm (12)

FEATURES:
This model is designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large through hole allows most 3” diameter oil pipes to be machined.
One piece Meehanite casting bed
12-speed geared head (40-2,000 rpm)
3.18” spindle bore, largest spindle in this size lathes. More choices for different diameter of materials to be machined.
All headstock gears are hardened and ground made from Chrome-Moly material gives long lasting power and accuracy in machining.
High precision pair of matched angular contact bearings supporting the front end of head stock, and rolling bearing for the rear end support. This arrangement allows high accuracy of the spindle even under heavy cutting conditions.
Wide range of feeds and threads. Selection done by “pull and lock” handles to avoid slipping in engagement of gears.
Jog button is equipped at headstock for easy engagement of gears before cutting.
Jog button is equipped at headstock for easy engagement of gears before cutting.
One piece casting bed instead of sheet metal connected legs ensure dampening of vibration and permanent straightness of the bed ways.
The carriage and cross slide ways are lubricated by push button knobs.
The removable gap increases the swing by an extra 8” to accommodate larger work pieces that are short in length
5 position carriage stop for pre-positioning of carriage feed distance.
“Tang” in tail stock for easy “knock out” of centers stuck in tailstock

STANDARD EQUIPMENT:
3-jaw 10" chuck, 12” Face plate, steady rest
Removeable gap, back plate
Coolant system, American tool post
Full length splash guard
Center sleeves, dead center, tool kit
Wired 220V or 440V (Specify)

SPECIFICATIONS: 1640L/1660L
CAPACITY
Swing over bed: 17"
Swing over cross slide: 8.75"
Swing over gap, width: 25.5"
Gap Width (In Front Of Face Plate): 11.81"
Distance between centers: 40" (1640L) / 60" (1660L)

HEADSTOCK
Spindle speeds (rpm): 40-2,000 rpm
Spindle nose type: D1-8 Camlock
Spindle bore: 3.18 in. (58 mm)

THREADS & FEEDS
Inch Threads, Number: 4-56 tpi, 36
Metric Threads, Number: 0.5-7mm, 17
Modular Threads, Number: 0.019-0.275 in., 17 (0.5-7mm, 17)
Diametral Pitch Threads, Number: 0.157-2.20 in., 36 (4-56 mm)
Longitudinal Feeds: 0.002 - 0.032 in. (0.05-0.82 mm)
Cross Feeds: 0.0001 –0.0094 in. (0.02-0.4 mm)
Leadscrew Pitch, Diameter: 1.37 in., 35 mm

CARRIAGE
Cross Slide Travel: 9.84 in. (250 mm)
Compound Travel: 4.92 in. (125 mm)
Compound Width: 4.5 in. (114.3 mm)

BED
Bed length: 84.44" (1640L) / 104" (1660L)
Bed width: 11.8"

TAILSTOCK
Quill Diameter: 2.28 in. (58 mm)
Quill Travel: 5.9 in. (150 mm)
Quill Center Taper: MT #4

GENERAL
Spindle Motor: 7.5 HP (5.625 Kw)
Voltage: 230V/460V
Phase: 3 Phase
Power Consumption (220V): 8KVA/25 amps
Power Consumption (440V): 8KVA/12.5 amps
Approximate Weight: 3,461.26 lbs. (1640L) / 3,814 lbs. (1660L)
Dimensions: 7.05' x 2.66' x 3.9' (1640L) / 8.69' x 2.66' x 3.9' (1660L)

OPTIONAL ITEMS:
3-jaw 12" chuck
4-jaw 12" chuck
Chuck guard
Tool guard (at front of compound slide with limit switch)
Lead screw cover (full length, accordion style)
Safety cover at end of spindle
UL or CSA electrical components, UL spindle motor, CSA pump motor

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

Contact Seller

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida

Contact the Seller
 
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
 
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Name*:
Email*:
Phone*:
Address (including City, State)*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored
Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details