STANDARD FEATURES:

Complete punch system,
Coupling wrench included, 18" bar shear, Built-in rod shear
6" angle shear blades installed, 2.5" x 6" x 1/2" coper/nother installed,
Fully guarded, Electric foot pedal, Electric stroke limiter
Adjustable steel punch stripper, Low rake angle on shear blades,
Hydraulic system charged and ready to operate, Sound insulated,

DELIVERY: Eight (8) weeks after receipt of order

OPTIONAL ACCESSORIES ON ORIGINAL EQUIPMENT ONLY:
Single phase motor. . . . . . . . . . . . . . . . . . . . . . . . . $ 2,100.00
Special voltage (575 volts) . . . . . . . . . . . . . . . . . . . . 604.00
Electronic stoke limited. . . . . . . . . . . . . . . . . . . . . . STANDARD

RETRO FIT ACCESSORIES:
Coper/notcher table and blades. . . . . . . . . . . . . . . . . . . STANDARD
Pedestal die table. . . . . . . . . . . . . . . . . . . . . . . . . 392.00
Brake attachment--10" x 1/4". . . . . . . . . . . . . . . . . . . . 1,086.00
Oversize plate and coupling nut-complete set. . . . . . . . . . . . 699.00
Quick change punch coupling . . . . . . . . . . . . . . . . . . . . 622.00

STANDARD PUNCH & DIE SETS:
Punch & die starter box (8 sets from 3/16" to 1-1/16"). . . . . . . 303.00
Round punch & die set--1/8" to 1-1/16"--per set . . . . . . . . . . 31.00
Square punch & die set--up to 3/4"--per set . . . . . . . . . . . . 116.00
Oblong punch & die set--up to 1-1/16" long--per set . . . . . . . . 132.00
Hex punch & die set---up to 29/32"--per set . . . . . . . . . . . . 196.00
Rectangular punch & die set--up to 5/8" x 7/8"--per set . . . . . . 266.00

OVERSIZE PUNCH & DIE SETS:
Round punch & die sets up to 1-9/16"--per set . . . . . . . . . . . 61.00
Square punch & die sets up to 1-1/16"--per set. . . . . . . . . . . 193.00
Oblong punch & die sets up to 1-1/2"--per set . . . . . . . . . . . 227.00
Hex punch & die set up to 1-1/4"--per set . . . . . . . . . . . . . 266.00

OPTIONAL TOOLING:
Angle notcher--90 degrees . . . . . . . . . . . . . . . . . . . . . 1,086.00
Housing and blades for cutting rounds--1/4", 3/8", 1/2"
5,8", 3/4" & 1". . . . . . . . . . . . . . . . . . . . . . . . 1,270.00
Channel shear--housing & blades . . . . . . . . . . . . . . . . . . P.O.R.
Pipe notcher housing (to be used with 1/2" to 2" notching dies) . . 347.00
1/2" pipe notching dies . . . . . . . . . . . . . . . . . . . 391.00
3/4" pipe notching dies . . . . . . . . . . . . . . . . . . . 420.00
1" pipe notching dies. . . . . . . . . . . . . . . . . . . . 448.00
1-1/4" pipe notching dies . . . . . . . . . . . . . . . . . . 478.00
1-1/2" pipe notching dies . . . . . . . . . . . . . . . . . . 508.00
2" pipe notching dies. . . . . . . . . . . . . . . . . . . . 536.00
Inland freight. . . . . . . . . . . . . . . . . . . . . . . . 1,550.00

SPECIFICATIONS:
PUNCH STATION:
Tonnage 100
Throat 11"
Capacity 1-1/16" hole thru 1" plate
Largest punch accepted with
--standard punch holder 1-1/16"
--oversized punch holder 1-9/16"
Largest die accepted with
--standard die holder 1-1/16"
--oversized die holder 1-1/4"
Open height 8-3/4"
Shut height 6-13/16"
Stroke 1-15/16"

BAR SHEAR
Maximum cutting length 18"
Cutting capacity--maximum width 1/2" x 18"
3/4" x 14"
--max thickness 1" x 10"
Maximum bar shearing--round--square 1"

ANGLE SHEAR
Maximum angle @ 90 degree 6" x 6" x 1/2"

COPER NOTCHER (Optional)
Maximum cut 2-1/2" x 6" x 1/2"

MOTOR & ELECTRICS
Motor power 10 HP
Electrics--standard 208-220/3/60
--optional 440/3/60
230/1/60

DIMENSIONS
Base dimensions 46" x 56" square
Overall height 63"
Net weight 5,180 l

This machine is listed for sale by A M Metalmaq located in Hialeah, Florida