CALL FOR BEST PRICING!

FEATURES:
Need to increase production? The manual BS-20M-DM offers hydraulic descent, a roller infeed, and a material stop for efficiency. With its steel frame, the saw will last for many years.

Inverter drive lets you adjust blade speed: 69 to 306 fpm.
Accepts large 1.25” blade (included) for speed and accuracy. The larger the blade, the straighter the cut.
Available in 220-volt triple-phase or 440-volt triple-phase (special order) models.
Industrial reduction gearbox transmission makes the saw more reliable than one with a belt and pulley system.
Miters 45° left and 60° right. Just push or pull the head to the angle you need.
Rigid cast iron bow adds to the structural strength of the machine and reduces vibrations.
Quick-lock vise has serrated jaws that grip onto round material, preventing it from spinning and ruining a blade.
Hydraulic descent allows you to select the proper speed, increasing cut quality and blade life.
Roller infeed and outfeed table enables you to slide the material to and from the blade, saving strain.
Includes a material stop for conveniently making repeat cuts.
Digital readout shows the blade speed. Adjust the dial to use the same settings for multiples of a part.
Electro-welded steel frame keeps vibrations down to a minimum, so your cuts stay straight and accurate.
Our patented blade tensioning gauge simplifies the process of checking the tension and adjusting it. Just line the black arrow up with the green area.
High-pressure flood coolant system washes away chips and helps the blade last longer.
Huge chip tray at the bottom collects debris and keeps your shop clean.
Automatic shut-off system stops the machine once it’s done cutting, for your safety.
We typically keep this saw and its parts in stock for fast deliveries.
Covered by a 1-year parts warranty.

SPECIFICATIONS:
Capacity Round (90° / 45° / 60°): 13" x 12" x 8.5"
Capacity Square (90° / 45° / 60°): 13" x 12" x 8.5"
Capacity Rectangular (90°): 13" x 18" / 13" x 10.6" / 12.4" x 7.7"
Capacity Rectangular (90° / 45° / 60°): 330 x 457 / 330 x 279 / 254 x 160 mm
Blade Size (H/W/L): 1.25" x .042" x 162.6"
Blade speed (fpm): 60 - 306 Inverter Driven
Blade Guide: Carbide / Roller
Miter Angle: 0 - 60°
Miter Adjustment: Dual Miter Swivel Head
Table Height: 775mm
Descent Control: Hydraulic
Return: Manual
Drive: Inverter Direct
Motor: 3 hp
Power Requirement: 220V or 440V, 60Hz, 3-Phase
Dimensions (L/W/H): 88.6" x 35.5" x 61.4"
Weight: 2,156 lbs

OPTIONAL MODELS:


Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida