GMC Heavy Duty Precision Gap Bed Lathe GT-26120 |
|
Stock Code: |
GT-26120 |
Price: | $RFQ |
Subcategory: | Gap Lathes - Removable Gap |
Manufacturer: |
Gmc |
Model: |
GT-26120 |
Condition: | New |
CALL FOR BEST PRICING!
FEATURES:
ISO 9001 certified
Large spindle bore 4-1/8”
Adjustable mechanical spindle clutch for spindle start Forward/reverse and brake, spindle brake without stop the spindle motor to longer motor 8 times life than most other Brand lathe with electrical start/stop.
4-way rapid traverse on Longitudinal and cross ways
All dual inch/metric dials.
solid cast iron machine base
Heavy Duty guideway width 15-1/2”
Heavy Duty main motor 15 HP
12 spindle speeds from 36-1,600 rpm
Oil pump on apron for all ways and leadscrews
Threading and feeding rate change without changing gears
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box
STANDARD ITEMS:
Free Taper turning attachment, installed
12” 3-jaw chuck with top reversible jaws
20” 4-jaw chuck
25” Face plate
10” drive plate
4-3/4” – 10-1/4” large steady rest
1”-3” follow rest
Removable gap
4-way tools post
Foot brake
Halogen Work light
Coolant system
Oil pump on apron for lubrication to all ways and leadscrews
Section splash guard on Apron for GT-26120 only
(2) dead centers and (1) reducing sleeve
Thread chasing dial
Tool box
SPECIFICATIONS:
Max. swing over bed: 26"
Max. length of workpiece: 120"
Max. swing over cross slide: 16-1/2"
Max. Swing in gap: 34-1/4"
Width of Bed: 15-1/2"
Effective length in gap to spindle: 9"
Effective length in gap to chuck jaws: 6"
Spindle bore:D1-8, 4-1/8”
Taper of spindle center: MT6
Spindle speeds: 36-1,600 rpm / 12 steps
Longitudinal feeds: 0.0023-0.093 IPR, 65 kinds
Cross feeds: 0.0011-0.04 IPR, 65 kinds
Inch threads: 13 & 28-2 TPI, 27 kinds - 28,14,7,3-1/2, 27, 24, 12, 6, 3, 22, 11, 5-1/2, 2-3/4, 20, 10, 5, 2-1/2, 18,9,4-1/2, 2-1/4, 16, 8, 4, 2, 11-1/2, 19
Metric threads: 1-14 mm , 22 kinds
Module threads: 0.5-7 mm, 18 kinds
Diameter Pitch threads: 56-4 DP , 24 kinds
Max. travel of top slide: 5-3/4"
Max. travel of cross slide: 14"
Longitudinal rapid traverse: 18 ft / min
Cross rapid traverse: 8 ft / min
Diameter of tailstock quill: 3"
Max. travel of tailstock quill: 6”
Taper of tailstock quill center: M.T. # 5
Max. weight of workpiece: 2,000 lbs.
4-way Tool Post Size: 1" x 1"
Longitudinal leadscrew diameter / pitch: Diameter: 3" — Pitch: 2 TPI
Main motor: 15 HP, 220V/440V, 3 phase, prewired on 220V
Rapid traverse motor: 1/3 HP, 220V/440V, 3 phase, prewired on 220V
Coolant pump motor: 1/8 HP,220V/440V, 3 phase, prewired on 220V
Net weight, approx.: 9,350 lbs
Overall dimensions, LxWxH: 182” x 45” x 66”
OPTIONAL ITEMS:
NEWALL DRO: DRO for GT-26120, NEWALL (England), 2 axis, free install
SINO DRO: DRO for GT-26120, SINO DRO, free installation
Leveling pad
SR5-GT-26120: 3/4” – 5” small steady rest with brass tips
SR16-GT26: 10”-16” large steady rest with brass tips
5-C: 5-C Hand lever type collet closer, “JFK” USA, free install
900-0014: 33 pc 5C collet set, from 1/16 to 1-1/16” by 32ndth
900-0050-05: Live center for tailstock MT# 5, part
2003-0005: 5pc Indexable carbide turning set
2003-0014: 3/8” carbide insert
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida