Q150-XLS:

The standard Q150-XLS comes complete with everything you need except the mag drill:

1.50" dia x 72" long Boring Bar - made from highest quality chrome hardened and precision ground 100,000 PSI tensile strength alloy steel. The chrome resists burrs and scoring to still fit the bearings use after use. Cutting Bit mounting holes are spaced 5 inches apart. 3/4 diameter shank with 3 flats for solid gripping by your mag drill chuck.
1.50" dia x 36" long Boring Bar - for easy close hole boring.
3 bolt-on self-aligning Bearings - the I.D. of the bearings have a perfect fit between bar and bearings.
3 Bolt-on Bearing Mounting Plates and 4 pairs of Standoffs - 3/4 inch thick for easy weld on and vibration free machining. Easy to unbolt for measuring or welding. Black oxide coated to prevent rust. One of the Bearing Mounting Plates is extra long for use at the end of a boom or to mount the optional bore welder.
1 Drill Base Adapter with built-in bearing - Important safety device to hold the magnetic drill press in case of power failure. The built-in bearing takes the load of the boring shaft to prevent overloading the internal drill press bearings. Includes mounting hole for BOA-408-AMT bore welder.
2 Centering Sleeves - for concentric alignment of the boring bar and bearings in small holes.
2 Centering Cones - for quick concentric alignment of the boring bar and bearings in larger holes.
7 Carbide Cutting Tools - 3 types of boring, 1 chamfering, 1 facing. Held in the boring shaft by heavy set screws. Modifiable cutters are long enough to rebore 5.5" diameter.
1 Digital Electronic Caliper - Measures 0" to 8" with digital readout to .001"
1 Caliper Jaw Extensions - Extend the jaws of the Digital Caliper to easily measure holes.
1 Telescoping Bore Gage Set - To measure the diameter of your holes.
1 Elastic Bunge Cord - Use as power feed to pull drill handle or to dampen boring bar vibration.
1 Solid Wood Case - Padlockable, with 2 handles, and dolly wheels.

Optional Milwaukee Portable Magnetic Drill Press with chuck: (see below)
Variable speed, 11" stroke. You need this if you do not already have a mag drill with 3/4" chuck.
Optional BOA-408-AMT Bore Welder Attachment:
Optional Adaptor to bore up to 8 inches (200mm) diameter (with 8" diameter cones and extra long bearing mounting plates):
Optional 18" long extra short bar for single hole boring:
Optional Q88A 7/8" x 29" Boring Bar Kit for use with Q150 equipment - bores holes from 1" to 1.5" diameter up to 16" apart. Also includes adapter busings:
Optional Dial Indicator Bore Gage (measures 2"- 6" within .001"): extra (see below)
Optional Ajustable measuring/centering tools: - these mount inside boring bar
Optional Cutting Tool Positioner: - this adjusts the cutter height within .001"
Optional Cutting Tool Dial Indicator & Bracket: - set your cutter height within .001"
Extra Cutting Tools:

This machine is listed for sale by American Machine Tools Company located in Chicago, Illinois