NEW SHARP 16" x 40" PRECISION LATHE
MODEL: 1640L MADE IN TAIWAN
FEATURES:
D1-8 Camlock
3” Spindle Bore
Direct Selection For Inch/Metric Threads
One Piece Cast Meehanite Bed
7-1/2 Hp Spindle Motor
12-Speed Gear Head (40-2,000 Rpm)
SPECIFICATIONS:
Capacity
Swing Over Bed: 16”
Swing Over Cross Slide: 8-3/4”
Swing Over Gap: 24-3/8”
With of Gap: 9.75”
Center height form top of compound: 1.9"
Distance Between Centers: 40”
Headstock Spindle
Nose Type: D1-8 Camlock
Spindle Bore: 3- 1/16”
Spindle Speeds (12): 40-2,000 rpm
Taper of Spindle Bore: MT#6
Taper of Center: MT#4
Threads and Feeds
Longitudinal Feeds – in/rev (18): 0.002 - 0.032”
Cross Feeds – in / rev {#}: 0.0001 –0.0094” {12}
Inch Threads (#): 4-56 tpi {36}
Metric and Module Threads {#}: 0.5-7mm {17}
D.P. Threads (36): 4-56 mm
Leadscrew Pitch, Diameter: 4 tpi, 1-3/8”
Carriage
Cross Slide Travel: 8.7”
Compound Rest Travel: 4.9”
Compound Width: 4.5”
Bed
Bed Length: 59”
Bed Width: 11-3/4”
Tailstock
Quill Travel (graduated): 5”
Quill Diameter: 2-1/4”
Quill Taper: MT#4
General
Spindle Motor (220V or 440V, 60, 3: 7-1/2 hp
Net Weight (approx.): 3,600 LBS
STANDARD EQUIPMENT:
3-Jaw Chuck 10”
Coolant System
Halogen Work Light
Face Plate (16”)
Steady Rest (1/2” – 6”)
American Tool Post
Full Length Splash Guard
Follow Rest ( 0.59” – 2.76”)
Longitudinal Carriage Stops
Center sleeve ( MT 5 x 3)
Dead centers ( MT# 4x1, MT # 5 x1)
User can choose either 220V or 440 V application. 575 V needs an optional transformer
Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 set of dead center, Pin for Indicator, Can of Paint
OPTIONAL ACCESSORIES:
3 - Jaw 12” Chuck (QU) in lieu of the 3 - Jaw 10” (Standard Equipment)
3-Jaw 12” Chuck (QU)
4 - Jaw 12” Chuck (QU)
3 - Jaw Chuck 10” (Bison)
3 - Jaw Chuck 12” (Bison)
4 - Jaw Chuck 12” (Bison)
Chuck Guard( factory order only)
Tool guard ( factory order only)
Lead screw guard ( factory order only)
Guard behind spindle( factory order only)
UL/CSA switch board/UL motor/CSA pump in lieu of regular version
UL/CSA-16 ( factory order only)
** NOTE: SHARP DOES NOT PROVIDE UL/CSA STICKERS ON THE MACHINES,BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN PUT "COMPLIANCE" STICKERS ON THE MACHINES AFTERWARDS.
All heighted items are factory order only and all guards are needed for UL compliance certificate
*** UL compliance certificate issued by CSA Group in Los Angeles with all highlighted parts above NET $4500
Micrometer Carriage Stop
4-Way Toolpost for 16” Swing Lathe
Taper Attachment ( factory installed)
Roller Jaws for Steady Rest
(Extra) Steady Rest 16” for Lathes (1/2 – 6” Capacity)
Steady Rest for 16” Lathes (4 – 9” Capacity)
Drill & Arbor (JACOBS)
Quick Change Tool (7 pcs) Holder Set (Aloris)
Live Center – Royal (Dual Bearing) MT#4
Live Center – MT#4
5C Collet Set (1/8” to 1-1/16” by 1/16”) 16 pcs.
5C Collet Closer for 16 / 18” Lathe (Atlas)
575 V transformer, please select 440 T 10
10 HP motor in lieu of 7.5 HP
DIGITAL READ OUT SYSTEMS:
Fagor 20i D.R.O. FG-1640
Fagor 40i D.R.O. FG-40i-1640
Acu-Rite 200S D.R.O. AR-1640
Newall DP700 D.R.O. NWDP-1640
FOR MORE INFORMATION: Call Terry at 973-497-7612