NEW SHARP 6" x 18" HAND FEED PRECISION SURFACE GRINDER     MODEL:   SG-618    ** MADE IN TAIWAN**



CAPACITY
Maximum grinding length: 18.5"
Maximum grinding width: 6.3"
Maximum distance: table to spindle center: 16"

TABLE
Working Surface (W x L): 6 x 18.3"
Maximum longitudinal travel: 18.9"
Maximum cross travel: 7"

FEED
LONGITUDINAL MOVEMENT OF TABLE
Hand feed per revolution: 4.2"
CROSS MOVEMENT OF SADDLE
Hand feed per revolution: .02"
Graduation of hand wheel: 0.001"
VERTICAL MOVEMENT OF WHEEL HAND
Hand feed per revolution: 0.05"
Graduatin of hand wheel: 0.0001"

SPINDLE AND WHEEL
Spindle motor: 1-1/2 hp (wired either 220v or 440v, please specify)
Spindle speed: 3,600 RPM
Grinding wheel outside diameter: 8"
Grinding wheel bore: 1.25"
Grinding wheel width: 0.63"

GENERAL
Floor space (W x H x L): 83 x 40 x 48"
Net weight (approximately): 1,600 lbs.

  FEATURES
One "V" and one flat way for longitudinal travel; both ways are
hand-scraped and covered with Turcite B coating
Accurate slot grinding achieved using saddle locking system
Double-nut backlash eliminator
Cross slide and column screws are hardened and ground to a 70
Rockwell C hardness
Wire rope-driven table
main spindle runout within 0. 0001"
Automatic lubrication system

STANDARD EQUIPMENT:
Grinding Wheel (8" x 1.25" x 0.63")
Wheel adaptor/flange
Work light
Wheel Balancing arbor
Diamond dresser
Tool kit

OPTIONAL (EXTRA COST) ACCESSORIES
Permanent magnetic chuck - coarse or fine pole (Kanetsu)
Electro-magnetic chuck with control (Kanetsu or Walker)
Spare wheel adaptor
Coolant systems with or without paper filtration
Dust collector
Parallel dresser
Wheel Balancing stand
Splash Guards for coolant
Digital readout system (Sony, Acu-Rite or Newall available)





FOR MORE INFORMATION: Call Terry at 973-497-7612

This machine is listed for sale by Machinery Values Inc. located in Harrison, New Jersey