STANDARD FEATURES:

Dual operator allows for two operators to work at the same time at full capacity

150-ton punch station (1-7/8" in 1")

Keyed punch ram for safety

12" throat depth

Punch gauging table with fence and scale

Die holders- 2", 2-1/2", and 3"

Punch nut with wrench and stripper

Adjustable swing-away stripper

One round punch & die: max. diameter 1-1/4"

Punch jog control

Two adjustable electric stroke controls with scale

Two electric remote foot pedals

Two 2-stage hydraulic pumps

Two valves

Angle shear capacity @ 90 degrees: 6" x 6" x 1/2"

Rectangle notcher 3" x 5-3/4" x 1/2"

Notcher table with guides

240-ton, 24" flat bar shear with sabre blade

Shear table with miter fence

Tool table work area

Slug receptacles

Electrical box supplied with emergency palm button and lock-out tag-out accommodations

230/460 volt/3-ph electrics (must specify voltage)

All guards necessary to comply with ANSI B 11-5 standards

Forklift accommodations

3 year warranty on parts

 

CAPACITIES AND SPECIFICATIONS:

RATED ON A36 MILD STEEL/65,000 PSI TENSILE

 

Punching capacity .................................. 150 ton (136 mt)

                  .................................. 1-1/2" in 1-1/4" (38 mm in 32 mm)

                  .................................. 1-7/8" in 1" (48 mm in 25 mm)

                  .................................. 2-1/2" in 3/4" (63 mm in 19 mm)

Special tooling .................................... 4" max. dia. (100 mm max. dia.)

Throat depth ....................................... 12" (300 mm)

Flat bar shear     ................................. 240 ton, 24" length (600 mm)

(sabre blade-std.) ................................. 1" x 14" (25 x 355 mm)

                   ................................. 3/4" x 24" (19 x 610 mm)

Angle shear

 90 degrees ........................................ 6" x 6" x 1/2" (150 x 150 x 12 mm)

 45 degrees ........................................ 3" x 3" x 3/8" (75 x 75 x 10 mm)

 (w/Bar shear) ..................................... 4" x 4" x 1/2" (100 x 100 x 12 mm)

Brake 12" .......................................... 90 ton (81.6 mt)

Brake 24" .......................................... 70 ton (63.5 mt)

Open end brake ..................................... Max. 1/4" x 5" (6 x 125 mm) flat or angle iron

Pipe notcher ....................................... 3/4", 1" (19 mm, 25 mm)

Schedule 40  ....................................... 1-1/4" (32 mm)

             ....................................... 1-1/2", 2" (38 mm, 50 mm)

90 degree V-notcher ................................ 6" x 6" x 5/16" (150 x 150 x 8 mm)

Rectangle notcher .................................. 3" x 5-3/4" x 1/2" (75 x 145 x 12 mm)

V-notch ............................................ 3" x 3" x 1/2" (75 x 75 x 12 mm)

Notching in leg of channel ......................... 6" to 10" (150 mm to 250 mm)

Channel shear ...................................... 2" to 6" adj. (50 mm to 150 mm)

Strut shear ........................................ samples required

Rod shear

 Round rod (max.) .................................. 1/4" to 1-1/4", 9 cavity (6 mm to 32 mm)

 Square rod (max.) ................................. 1/4" to 1", 1 cavity (6 mm to 25 mm)

Square tube shear .................................. 1/2" to 2", 12 gauge (12 mm to 50 mm, 2.75 mm)

Picket tool ........................................ 1/2", 3/4", 1" (12 mm, 19 mm, 25 mm)

            ........................................ 16 gauge (1.6 mm)

Offset die holder .................................. Max. 40 ton (36 mt)

Strokes per minute

 In light material ................................. 52 spm (1/4" stroke) [punch station]

 In heavy material ................................. 17 spm (3/4" stroke) [punch station]

Hydraulics ......................................... 3,500/3,500 psi (241/241 bar)

 

Motor

 Standard .......................................... 10 hp 3 ph (7.46 kW) 230/460/208/380/575v

 Optional .......................................... 10 hp 1 ph (7.46 kW) 230v

 

Dimensions ......................................... 77-1/4" L x 34" W x 74-1/4" H

           ......................................... (174 cm x 119 cm x 187 cm)

 

Shipping weight .................................... 6,404 lbs. (2,904 kg)

 

OPTIONAL STANDARD TOOLING (CALL FOR PRICING):

12" & 24" brake

Open end brake

Pipe notcher

90 degree V-notcher

Rectangle notcher

6" x 6" die holder

Channel shear

Tube shear

Rod shear

Picket tool

Offset die holder

Unequal leg angle blades

Punch slug receptacle

Strut shear

Urethane stripper

Brake length gauge with scale (12" & 24" brakes)

Brake table with scale & squaring arm (12" & 24" brake)

Multi-loc punch gauging table (36" and 85" extensions available)

48" back gauge

Hydraulic hold-down

Laser light

Tool table extension with punch and die storage

24" x 5' conveyor with angle iron support

Punch table extension