CALL FOR 386-304-3720 AVAILABILITY

FEATURES:
AHS offers reliable and excellent solutions for precise and challenging rolling applications. It is the most reasonable choice to bend the materials with a plate thickness of 2mm to 200mm and with a plate width of 500mm to 12000mm.
PRECISE, PRODUCTIVE AND RELIABLE: As well as being reliable, AHS increases productivity with its high speed rolling ability and it overcomes the most challenging bends thanks to its ease of use. Since the plate is pinched during rolling, skidding and slipping of materials are prevented. Thus, more reliable rolling operations are performed and more precise results are achieved.
In AHS 4-Roll Plate Rolling Machines, one of the side rolls can be used as a squaring roll, thus the plate can be easily and precisely aligned along the roll across the input direction.
LESS FLAT ENDS AT A SINGLE PASS: In AHS 4-Roll Machines, it is possible to achieve a full cylinder at a single pass because the material can be pinched with the lower-roll during pre-bending and bending. AHS model allows for precise pinching of the plate between upper and lower rolls, thus the length of flat ends are minimized. Akyapak 4-Roll CNC Rolling Machines having superior features decrease the dependency on an operator and offer more reliable and more productive solutions.

STANDARD EQUIPMENT:
Induction Hardened Rolls
Torsion Bar
Digital Display
Cone Bending Device
Two Speed Control
All rolls are made of special steel.
Machine body is steel construction. (ST 52)
All rollers mounted in bearing.
Separate control panel
Drop-end controlled from control panel in order to release easily bended metal sheet
Movement and parallelism adjustment of the rollers controlled from the control panel. (Ergonomic designed control panel which allows to control all the functions of the machine is independent from the machine.)
Central rolls are driven with hydraulic motor and reducer.
Electrical and hydraulic protection against overloads.
Hydraulic installation from world-wide known companies
Electrical installation from world-wide known companies
Suitable for “CE”.

CALL/EMAIL FOR MORE INFORMATION

SPECIFICATIONS:
Working length: 6.9'

Maximum thickness:
Pre-Bending: 1/4"
Bending: 5/16" (Yield Point: 36,000 PSI)

Number of Rolls: 4
Motor Power: 4
Rollig speed up to: 16 ft/min
Min. diameter (in - Ø): 1.1 x top roll
Top Roll Dia. (in - Ø): 7.50"
Pinch Roll Dia. (in - Ø): 6.70"
Side Roll Dia.: 5.90"
Length x Width x Height (ft.): 13.3' x 4.1' x 4.5'
Weight: 7,600 lbs.

*The sheet will be able to be re-open more than the minimum diameters specified here due to the physical material spring back. Particularly at the narrowest diameters, even if the material is completely rolled around the top roll, due to the high back spring, the stated values are approximate and not binding on the manufacturer.
* The specified capacities are for multi-pass rolling operations.
* Data based upon steel 36,000 PSI yield point.
* For cone bending, all bending values must be reduced to %50

OPTIONAL ITEMS:
Central and side supports
Variable speed of rotation
Material feeding table with various features
Interchangeable top roll
Oil cooling system
Driven side rolls
Automatic material ejection equipment
Automatic loading and unloading system
Deflection compensating system
Motors in variable voltage and frequency
CNC
NC


Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida