buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Punches & Punching Machines > Notching Machines    < Back

TN-250 Hole Saw Tubing Notcher - $RFQ

Item Number: #00035211
TN-250 Hole Saw Tubing Notcher

TN-250 Hole Saw Tubing Notcher
Price: $RFQ

Notching Machines

Maximum thickness2.5"
Model:  TN-250
Condition: New

Powered by your portable drill with 1/2" chuck. This very special pipe notcher machine has a self centering capture vise that can clamp onto bent tubes in any direction. The only hole saw style tube notcher that is always centered left to right and up and down. Has built-in Protractor to show you the angle the notch will be. Easy positioning adjustments in every direction. Made from heavy steel plate to reduce vibration, it uses a 1-1/4” Thompson® shaft that rides in a sealed needle bearing for longevity of the machine and hole saw. The vise has a powerful screw with a built in hand wheel that opens and closes the unique six radial clamping jaws. Clamps and notches on a bend or straight section of tubing. This notcher can quickly offset for off center notches and does not need annoying shims or spacers. The shaft has a replaceable hex end arbor for your 1/2" drill chuck. Hole saw blades cost extra
Capacity: 1" to 2-1/2” OD.
Max angle: 230 degrees (very steep)
Weight: 50 Lbs.

Contact Seller

This machine is listed for sale by American Machine Tools Company located in Chicago, Illinois

Contact the Seller
American Machine Tools Company
  5864 N Northwest Hwy
IL 60631
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Address (including City, State)*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored
Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details