BAILEIGH Gear Driven Band Saw BS-260M
Miter Saws - Metal
CALL FOR BEST PRICING!
The gear-driven BS-260M is one of the most versatile saws on the market. An AC inverter for speed control runs on 220-volt single-phase power. Use it almost anywhere!
Capacity of 8.91” round at 90°.
Dual-mitering head swivels up to 60° to the right and up to 45° to the left.
Change the miter angle in seconds with the quick-release head lock.
Solid cast iron saw bow and pivot ensure the straightest cuts with little to no vibration.
Accepts standard 1” blades.
8 precision ball bearings keep the blade in line.
Patented blade tensioning device helps you check the tension and safely shuts down the machine if the blade breaks.
You can adjust the cutting speed from 66 to 280 fpm to make high-quality cuts in a specific material.
Direct-drive gearbox design saves you time in the long run—no pulleys to adjust or belts to break!
2 operating modes:
Manual descent mode for small production runs: Turn on the machine via the trigger switch, then manually guide the material. Perfect for small-to-medium-sized shops.
Hydraulic descent for larger production runs: Increases blade life and reduces operator fatigue. The hydraulic descent has a downfeed adjustment for feed pressure.
Comes standard with a powerful flood coolant system that washes away metal chips, cools and lubricates the blade, and helps prolong blade life.
Fully-welded steel base stabilizes the saw, reduces vibrations, and helps to maintain accuracy for decades.
Baileigh covers this horizontal band saw with a 1-year parts warranty.
We typically keep all replacement parts in stock for fast deliveries.
Includes lifetime technical support by phone. Call up our team of experienced reps whenever you have a problem with the saw.
Capacity Round (90°/45°/60°/45°L): 8.91” / 5.9” / 3.54” / 4.33”
Capacity Square (90°/45°/60°/45°L): 8.66” / 5.7” / 3.34” / 4.33”
Capacity Rectangular (90°/45°/60°/45°L): 10.59” x 4.33” / 7.87” x 4.92” / 6.3” x 4.33”
Blade Size (H / W / L): 1” / .035” / 96.85”
Blade speed (fpm): 66-280 variable
Blade Guide: Carbide / Roller
Miter Angle: 0 – 60, 45 L deg
Miter Adjustment: Dual Swivel Head
Table Height: 35”
Descent Control: Hydraulic
Motor: 2 hp
Power Requirement: 110V
Dimensions (L / W / H): 69” / 44” / 48”
Weight: 948 lbs
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida