U.S. INDUSTRIAL Manual Variable Speed Milling Machine Package
|Table width: ||9"
|Table length: ||49"
CALL FOR BEST PRICE!
KIT PACKAGE ONLY:
9” x 49” table with 3 T-slots, 5/8”, on 2.5” centers, Table travel is 33”. Leadscrew pitch is 5 TPI with dials on each end graduated in .001”.
Travel of crossfeed is 12” with .001” dial graduations
Knee travel is 15.74” with 10TPI leadscrew, .001” dial graduations
Ram allows for over 12” of travel, for variable throat depth
Conventional dovetail ways on X,Y, and Z Axis - Double locks on all axis
Aged stressed castings, stress relieved for long life and accuracy, Meehanite type
Power quill feed allows for 0.0018, 0.003, 0.006 Inches of feed per revolution of spindle
Hardened and ground and precisely scraped work table, saddle and knee ways
Centralized one-shot lubrication pump lubricates all way surfaces and leadscrews
Backlash adjustment for leadscrews, Gib adjustments for ways
Electrical cabinet with internal transformer for 110V and 24V devices, circuit breaker protected, Low Voltage controls, 24 volt halogen machine light. Transformer also includes power supply for digital readout and power table feed.
Operator low voltage controls for coolant pump, machine light, main power with emergency stop button. Spindle off/forward/reverse switch
Built in coolant tank base with coolant pump, pressure and return hose , nozzle and valve, Installed and ready to use. Base chip pan to help prevent coolant overflow.
Manual variable speed spindle drive, 3 Horsepower runs the spindle from 60 to 4200 RPM. Spindle speed dial on head shows RPM in direct drive and back gear. Spindle motor is finned for cooling.
Sino three axis digital readout has 0.0002” resolution. Readout comes mounted to knee, table and cross and is ready to use. The readout is inch/metric switchable, with absolute incremental function. There is a calculator function, bolt hole pattern function, line pattern function, and arc calculate function. A comprehensive manual is included.
Power table feed is Align model AL500SP. Infinitely variable feed from .8 to 32 IPM with rapid button, on/off switch, and adjustable travel stops. This heavy duty power feed has 150 inch pounds of torque, with max to 650. Power table feed comes installed on machine, ready to use.
Toolbox and tools, manuals, electrical drawing, test certificate all included
PART# AL500SP: Heavy duty power table feed on X axis
PART# FCKIT: Flood coolant pump, hose, nozzle
PART# CPKIT: Chip pan
PART# MLKIT: Machine light
PART# FRWCKIT: Front and Rear way covers
PART# SINO3AX: Three axis digital readout
Working surface: 9” x 49”
29” with powerfeed
(33” without powerfeed)
(Powerfeed stops prevent overtravel.)
Cross travel: 12" (11” with readout installed)
Vertical travel: 15.74"
Ram travel: 12"
Head tilt, left to right: 90 degrees left, 90 degrees right with degree ring scale
Head Tilt, front to back: 45 degrees front, 45 degrees back with degree ring scale
Ram circular movement: 360 Degree with degree ring scale
T-slots: 3 @ 2-1/2" centers, 5/8" Ea.
Spindle drive: 3 HP
Spindle range (Manual Vari-speed sheeve): 60-4200 Variable with
Direct Drive and Back-geared
Spindle type: R-8
Quill Travel & Diameter: 5" travel and 3-3/8" diameter
Power quill feed range, inches per rev: 0.0018”, 0.003”, 0.006”
Weight of work piece, max: 500 lbs.
3 HP, 208-240 volt or 440/460/480 volt,
3-phase spindle motor, motor- standard
Electrics: 208-240V or 440/460/480V, 3 phase (Please Specify)
Machine, Net Weight: 2,550 lbs.
PDB-PB001: Air Power Drawbar, pneumatic, installed
Y150-3V: Bestline Power Feed for Y-axis (cross feed)
Z150-3V: Bestline Power Feed for Z-axis (knee feed)
R8ER32KIT-K: Mill QC collet set, 1 holder R-8 to ER32, 1 spanner for collet nut,
11 ER32 collets from 1/8” to 3/4”, all in form fitted case
CK-K: Clamp kit, 58 piece, bolts, nuts, step blocks, fingers, for fixturing
P100-K: Precision Parallel Set, several matched parallels in form case
6” VISE-K: Milling vise, 6” lock type
R8-SET: R-8 collet set, 11 pieces
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida